Bedienungsanleitung Makita BBX7600 (Seite 4 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

598423

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Start the Blower only in accordance with the instructions.

Do not use any other methods for starting the engine (6)!

• Use the blower and the tools supplied only for applications specified.

• Start the blower engine only after the entire tool has been assembled.

Operation of the tool is permitted only after all the appropriate

accessories are attached.

• The engine is to be switched off immediately if there are any engine

problems.

• When working with the blower, always wrap your fingers tightly around

the handle, keeping the control handle cradled between your thumb and

forefinger. Keep your hand in this position to have your machine under

control at all times. Make sure your control handle is in good condition

and free of moisture, pitch, oil or grease.

Always ensure a safe, well-balanced footing.

• Operate the blower in such a manner as to avoid inhalation of the

exhaust gases. Never run the engine in enclosed rooms (risk of

suffocation and gas poisoning). Carbon monoxide is an odorless gas.

Always ensure there is adequate ventilation.

• Switch off the engine when resting and when leaving the blower

unattended. Place it in a safe location prevent danger to others, setting

fire to combustible materials, or damage to the machine.

• Never lay the hot blower onto dry grass or onto any combustible

materials.

• All protective parts and guards supplied with the machine must be used

during operation.

• Never operate the engine with a faulty exhaust muffler.

• Shut off the engine during transport (7).

• Position the blower safely during car or truck transportation to avoid fuel

leakage.

• When transporting the blower, ensure that the fuel tank is completely

empty.

Refueling

• Shut off the engine during refueling (7), keep well away from open flame

(8) and do not smoke.

• Avoid skin contact with petroleum products. Do not inhale fuel vapor.

Always wear protective gloves during refueling. Change and clean

protective clothing at regular intervals.

• Take care not to spill either fuel or oil in order to prevent soil

contamination (environmental protection). Clean the blower immediately

after fuel has been spilt. Allow wet cloths to dry before disposing in

properly, covered container to prevent spontaneous combustion.

• Avoid any fuel contact with your clothing. Change your clothing

immediately if fuel has been spilled on it (fire hazard).

• Inspect the fuel cap at regular intervals making sure that it stays

securely fastened.

• Carefully tighten the locking screw of the fuel tank. Change locations to

start the engine (at least 3 meters away from the place of refueling) (9).

• Never refuel in closed rooms. Fuel vapors accumulate at ground level

(risk of explosions)

• Only transport and store fuel in approved containers. Make sure stored

fuel is not accessible to children.

• Do not attempt to refuel a hot or a running engine.

(6)

٨ Resting

٨ Transport

٨ Refueling

٨ Maintenance

٨ Tool Replacement

(7)

(8)

(9)

3 meters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BBX7600 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info