598477
3
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
3
ENGLISH
Explanation of general view
1-1. Battery cartridge
1-2. Button
2-1. Red part
2-2. Button
2-3. Battery cartridge
3-1. Switch trigger
4-1. Light
5-1. Reversing switch lever
6-1. LED indicator
7-1. Graduations
7-2. Adjusting grip
9-1. Bit
9-2. Sleeve
11-1. Limit mark
12-1. Brush holder cap
12-2. Screwdriver
SPECIFICATIONS
Model BFT120/BFT120F BFT121F
No load speed (min
-1
) 320 340
Fastening torque 5 - 12 N•m 5 - 12 N•m
Dimensions
174 mm x 65 mm x 256 mm
(with battery cartridge BH9020A)
174 mm x 65 mm x 279 mm
(with battery cartridge BH9033/BH9033A)
174 mm x 71 mm x 265 mm
(with battery cartridge BH1220)
174 mm x 71 mm x 288 mm
(with battery cartridge BH1233)
Net weight
1.3 kg
(with battery cartridge BH9020A)
1.4 kg
(with battery cartridge BH9033/BH9033A)
1.5 kg
(with battery cartridge BH1220)
1.7 kg
(with battery cartridge BH1233)
Rated voltage D.C. 9.6 V D.C. 12V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
ENG001-1
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is not more
than 70 dB (A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
ENH002-4
Model; BFT120,BFT120F,BFT121F
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN50260, EN55014 in accordance with Council
Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE2005
000087
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
ENB026-1
ADDITIONAL SAFETY RULES
FOR TOOL
1. Be aware that this tool is always in an
operating condition, because it does not have
to be plugged into an electrical outlet.
2. Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring. Contact with a "live"
wire will also make exposed metal parts of the tool
"live" and shock the operator.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
ENC002-3
IMPORTANT SAFETY
INSTRUCTIONS FOR CHARGER
& BATTERY CARTRIDGE
1. SAVE THESE INSTRUCTIONS- This manual
contains important safety and operating
instructions for battery charger.
2. Before using battery charger, read all
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita BFT120F wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Makita BFT120F

Makita BFT120F Bedienungsanleitung - Englisch, Holländisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info