Bedienungsanleitung Makita BHX2500 (Seite 4 von 35) (Deutsch, Englisch)

598567

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Start the Blower only in accordance with the instructions.

Do not use any other methods for starting the engine (6) !

• Use the blower and the tools supplied only for applications

specified.

• Start the blower engine only after the entire tool has been

assembled. Operation of the tool is permitted only after all

the appropriate accessories are attached.

• The engine is to be switched off immediately if there are any engine

problems.

• When working with the blower, always wrap your fingers tightly

around the handle, keeping the control handle cradled between

your thumb and forefinger. Keep your hand in this position to have

your machine under control at all times. Make sure your control

handle (and grip for vacuum attachment) are in good condition and

free of moisture, pitch, oil or grease.

Always ensure a safe, well-balanced footing.

• Operate the blower in such a manner as to avoid inhalation of the

exhaust gases. Never run the engine in enclosed rooms (risk of

suffocation and gas poisoning). Carbon monoxide is an odorless

gas. Always ensure there is adequate ventilation.

• Switch off the engine when resting and when leaving the blower

unattended. Place it in a safe location prevent danger to others,

setting fire to combustible materials, or damage to the machine.

• Never lay the hot blower onto dry grass or onto any combustible

materials.

• All protective parts and guards supplied with the machine must be

used during operation.

• Never operate the engine with a faulty exhaust muffler.

• Shut off the engine during transport (7).

• Position the blower safely during car or truck transportation to avoid

fuel leakage.

• When transporting the blower, ensure that the fuel tank is

completely empty.

Refuelling

• Shut off the engine during refuelling (7), keep well away from open

flame (8) and do not smoke.

• Avoid skin contact with petroleum products. Do not inhale fuel

vapor. Always wear protective gloves during refuelling. Change

and clean protective clothing at regular intervals.

• Take care not to spill either fuel or oil in order to prevent soil

contamination (environmental protection). Clean the blower

immediately after fuel has been spilt. Allow wet cloths to dry

before disposing in properly, covered container to prevent

spontaneous combustion.

• Avoid any fuel contact with your clothing. Change your clothing

immediately if fuel has been spilled on it (fire hazard).

• Inspect the fuel cap at regular intervals making sure that it stays

securely fastened.

• Carefully tighten the locking screw of the fuel tank. Change

locations to start the engine (at least 3 meters away from the place

of refuelling) (9).

• Never refuel in closed rooms. Fuel vapors accumulate at ground

level (risk of explosions)

• Only transport and store fuel in approved containers. Make sure

stored fuel is not accessible to children.

• Do not attempt to refuel a hot or a running engine.

●

Resting

●

Transport

●

Refuelling

●

Maintenance

●

Tool Replacement

(6)

(7)

(8)

(9)

3 meters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BHX2500 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BHX2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info