Bedienungsanleitung Makita btl060rfe (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

381540

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

Explanation of general view

SPECIFICATIONS

Intended use ENE033-1

The tool is intended for screw driving in wood, metal and

plastic.

SPECIFIC SAFETY RULES GEB012-2

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to impact

driver safety rules. If you use this tool unsafely or

incorrectly, you can suffer serious personal injury.

1. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a "live" wire will make exposed metal

parts of the tool "live" and shock the operator.

2. Always be sure you have a firm footing. Be sure

no one is below when using the tool in high

locations.

3. Hold the tool firmly.

4. Wear ear protectors.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

IMPORTANT SAFETY

INSTRUCTIONS ENC004-1

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the

battery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain. A battery short can cause a large current

flow, overheating, possible burns and even a

breakdown.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

8. Do not incinerate the battery cartridge even if it is

severely damaged or is completely worn out. The

battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

1. Red part

2. Button

3. Battery cartridge

4. Switch trigger

5. Lamp

6. Reversing switch lever

7. Bit

8. Sleeve

9. Insert bit

10. Spindle

11. Groove

12. Screw

13. Hook

14. Hex bolt

15. Angle head

16. Tooth

17. Straight head

18. Ratchet head

19. Standard bolt

20. Fastening torque

21. Proper fastening torque

22. Fastening time (S)

23. High tensile bolt

Model BTL060 BTL061

Capacities

Machine screw 4 mm - 8 mm

Bolt 4 mm - 12 mm

No load speed (min

-1

) 0 - 2,000

Impacts per minute 0 - 3,000

Max. fastening torque 60 N•m

Overall length 387 mm

Net weight 1.6 kg 1.7 kg

Rated voltage D.C. 14.4 V D.C. 18 V

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita btl060rfe Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info