Bedienungsanleitung Makita da 3011f (Seite 3 von 32) (Deutsch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

386460

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1 Lamp

2 Speed control screw

3 Switch lever

4 Higher

5Lower

6 Reversing switch lever

7 Chuck key

8Sleeve

9 Ring

10 Gripping part

11 Side grip (handle)

SPECIFICATIONS

Model DA3010/DA3010F

DA3011/DA3011F

Capacities

Steel ..................................................................10 mm

Wood .................................................................25 mm

No load speed (min

–1

) .................................... 0 — 2,400

Overall length .....................................................270 mm

Net weight .............................................................. 1.6 kg

Safety class ........................................................... /II

• Due to our continuing programme of research and

development, the specifications herein are subject to

change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

This tool is intended for drilling in wood, metal and plas-

tic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

DRILL SAFETY WARNINGS

GEB001-6

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Do not touch the drill bit or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

8. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see that

the switch lever actuates properly and returns to the

“OFF” position when released.

To start the tool, simply squeeze the switch lever. Tool

speed is increased by increasing pressure on the switch

lever. Release the switch lever to stop.

A speed control screw is provided so that maximum tool

speed can be limited (variable).

Turn the speed control screw clockwise for higher speed,

and counterclockwise for lower speed.

Reversing switch action (Fig. 2)

CAUTION:

• Always check the rotational direction before operation.

• Use the reversing switch only after the tool comes to a

complete stop. It will damage the tool to change the

rotational direction before the tool stops.

This tool has a reversing switch to change the rotational

direction. Move the reversing switch lever to the posi-

tion (A side) for clockwise (forward) rotation or the p-

osition (B side) for counterclockwise (reverse) rotation.

Lighting up the lamps (Fig. 1)

For Model DA3010F, DA3011F

CAUTION:

• Do not look in the light or see the source of light

directly.

To turn on the lamp, start the tool. Then, the lamp lights

up the top of the bit. To turn it off, stop the tool.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp. Be

careful not to scratch the lens of lamp, or it may lower

the illumination.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita da 3011f Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita da 3011f

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info