Bedienungsanleitung Makita DCS551 (Seite 3 von 64) (Deutsch, Englisch, Polnisch)

600550

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1-1. Button

1-2. Red indicator

1-3. Battery cartridge

2-1. Indicator lamps

2-2. Check button

3-1. Switch trigger

3-2. Lock-off lever

4-1. Battery indicator

5-1. Mode indicator

6-1. Lever

7-1. Alignment line

7-2. Cutting line

7-3. Base

8-1. Lamp

9-1. Shaft lock

9-2. Hex wrench

10-1. Hex bolt

10-2. Outer flange

10-3. Saw blade

10-4. Inner flange

10-5. Cup washer

11-1. Hex wrench

12-1. Hook

12-2. Screw

13-1. Front grip

13-2. Rear handle

13-3. Base

14-1. Cutting line

14-2. Base

14-3. Sight grooves

15-1. Clamp screw

15-2. Rip fence (Guide rule)

SPECIFICATIONS

Model DCS551

Blade diameter 136 mm - 150 mm

Max. Cutting depth 57.5 mm (with 150 mm diameter)

No load speed 3,900 min

-1

Overall length (with BL1830) 332 mm

Rated voltage D.C. 18 V

Net weight 2.9 kg

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

ENE022-1

Intended use

The tool is intended for cutting in mild steel.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : cutting metal

Vibration emission (a

h,M

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-18

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Metal Cutter

Model No./ Type: DCS551

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DCS551 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info