Bedienungsanleitung Makita EA3601F (Seite 4 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690911

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Fuels/Refuelling

• Stop the engine before refuelling the chain saw.

• Do not smoke or work near open res.

• Let the engine cool down before refuelling.

• Fuels can contain substances similar to solvents. Eyes and skin should not

come in contact with mineral oil products. Always wear protective gloves when

refuelling. Frequently clean and change protective clothes. Do not breathe in fuel

vapors. Inhalation of fuel vapors can be hazardous to your health.

• Do not spill fuel or chain oil. When you have spilt fuel or oil immediately clean

the chain saw. Fuel should not come in contact with clothes. If your clothes have

come in contact with fuel, change them at once.

• Ensure that no fuel or chain oil oozes into the soil (environmental protection). Use

an appropriate base.

• Refuelling is not allowed in closed rooms. Fuel vapors will accumulate near the

oor (explosion hazard).

• Ensure to rmly tighten the screw plugs of the fuel and oil tanks.

• Change the place before starting the engine (at least 3 m from the place of

refuelling).

• Fuel cannot be stored for an unlimited period of time. Buy only as much as will be

consumed in the near future.

• Use only approved and marked containers for the transport and storage of fuel

and chain oil. Ensure children have no access to fuel or chain oil.

Putting into operation

• Do not work on your own. Another person must be nearby in case of

emergencies (within shouting distance).

• Ensure that there are no children or other people within the working area. Pay

attention to any animals in the working area, as well.

• Before starting work the chain saw must be checked for perfect function

and operating safety according to the prescriptions. Never use a chain

saw with defects. Check especially the function of the chain brake, the correct

mounting of the guide bar, the correct sharpening and tightening of the chain,

the rm mounting of the chain cover, the easy motion of the throttle trigger and

the function of the throttle trigger lock-out, the cleanliness and dryness of the

handles, and the function of the combination switch.

• When you drop the chain saw or it gets other impacts, stop using the tool

immediately and perform inspection for identify signicant damage or defects.

• Put the chain saw only into operation if it is completely assembled. Never use the

chain saw when it is not completely assembled.

• Check your personal protective equipment.

• Put the chain saw into operation only as described in this instruction manual.

Other starting methods are not allowed.

• Before starting the chain saw ensure that you have a safe footing.

• When starting the chain saw it must be well supported and securely held. The

guide bar and chain must not be in contact with any object.

• Check chain oil reaches sufciently to the chain.

3 Meter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EA3601F Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info