Bedienungsanleitung Makita EA4300F (Seite 5 von 48) (Englisch)

599861

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Safety precautions for chain saw operators

While operating the chain saw please observe the

following rules:

a) Contact of the guide bar nose with any object

should be avoided.

b) Tip contact may cause the guide bar to move

suddenly upward and backward, which may

cause serious or fatal injury.

c) Always operate the chain saw with both hands.

WARNING!

Read and follow all safety precautions in the

operator’s manual. Failure to follow instructions

could result in serious injury. It is recommended to

lend the chain saw only to people who are expe-

rienced in working with chain saws. Always hand

over the Operator’s and Safety Manual.

WARNING!

This chain saw is capable of severe kickback that

could result in serious injury to the operator. Do

not operate this chain saw unless you have ex-

traordinary cutting needs and experience in and

special training for dealing with kickback. Chain

saws with signicantly reduced kickback potential

are available.

WARNING!

Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut.

This contact may abruptly stop the saw chain and

in some cases may cause a lightning fast reverse

reaction, kicking the guide bar up and back towards

the user, or push the guide bar back towards the

operator. Kickback may cause you to lose control

of the saw.

As a chain saw user, you can take several steps to

reduce the risk of a kickback and potential injury.

A. With a basic understanding of kickback, you

can reduce or eliminate the element of sur-

prise. It is a sudden surprise that contributes

to accidents.

B. Keep a good rm grip on the saw with both

hands, your right hand on the rear grip and

your left hand on the tubular handle, when the

engine is running. Use a rm grip with thumbs

and ngers encircling the chain saw handles. A

rm grip can neutralize kickback and help you

maintain control of the saw. Don’t let go!

C. Make sure that the area in which you are cut

ting is free from obstructions. Do not let the

nose of the guide bar contact the log, branch,

or any other obstructions which could be hit

while you are operating the saw.

D. Do not overreach or cut above shoulder

height.

E. Follow manufacturer’s sharpening and main-

tenance instructions for the saw chain.

F. Only use replacement bars and chains speci-

ed by the manufacturer or the equivalent.

Additional safety precautions

The following additional safety precautions must be

observed by all users of chain saws:

1. Do not operate a chain saw when you are fatigued.

2. Use safety footwear; snug-tting clothing; protec

tive gloves; and eye, hearing, and head protection

devices.

3. Use caution when handling fuel. Move the chain

saw at least 10 feet (3 m) from the fueling point

before starting the engine.

4. Do not allow other persons to be near the chain saw

when starting or cutting with the chain saw. Keep

bystanders and animals out of the work area.

5. Do not start cutting until you have a clear work

area, secure footing, and a planned retreat path

from the falling tree.

6. Keep all parts of your body away from the saw

chain when the engine is running.

7. Before you start the engine, make sure that the

saw chain is not contacting anything.

8. Carry the chain saw with the engine stopped, the

guide bar and saw chain to the rear, and the mufer

away from your body.

9. Do not operate a chain saw that is damaged,

is improperly adjusted, or is not completely and

securely assembled. Be sure that the saw chain

stops moving when the throttle control trigger is

released.

10. Shut off the engine before setting it down.

11. Use extreme caution when cutting small size brush

and saplings because slender material may catch

the saw chain and be whipped toward you or pull

you off balance.

12. When cutting a limb that is under tension be alert

for springback so that you will not be struck when

the tension on the wood bers is released.

13. Keep the handles dry, clean, and free of oil or fuel

mixture.

14. Operate the chain saw only in well-ventilated

areas.

15. Do not operate a chain saw in a tree unless you

have been specically trained to do so.

16. All chain saw service, other than the items listed

in the operator’s manual maintenance instructions,

should be performed by MAKITA. (For example,

if improper tools are used to remove the ywheel

or if an improper tool is used to hold the ywheel

in order to remove the clutch structural damage to

the ywheel could occur and could subsequently

cause the ywheel to burst.)

17. When transporting your chain saw, use the chain

protection cover.

18. Low kickback bars and low kickback chains are

designed to reduce the risk of kickback injury. Ask

your MAKITA dealer about these devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EA4300F Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita EA4300F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info