448381
4
Zoom out
Zoom in
Vorherige Seite
1/149
Nächste Seite
4
Start the brush cutter only in accordance with the instructions.
Do not use any other methods for starting the engine!
Use the brush cutter and the tools supplied only for applications
specified.
Start the brush cutter engine only after the entire tool has been
assembled. Operation of the tool is permitted only after all the
appropriate accessories are attached!
Before starting, make sure that the cutter blade will not contact
any objects such as branches, stones, etc.
The engine is to be stopped immediately if there are any engine
problems.
Should the cutter blade hit stones or any other objects immedi-
ately stop the engine and inspect the cutter blade.
Inspect the cutter blade at frequent regular intervals for damage
(detect hairline cracks by means of a tapping-noise test).
A familiar ringing sound should be heard.
Operate the brush cutter only with the shoulder strap attached.
It should be properly adjusted before putting the brush cutter
into operation. It is essential to adjust the shoulder strap to the
users size to prevent fatigue occurring during use or loss of
control of the tool. Never hold the tool with one hand during
use.
During operation always hold the brush cutter with both hands.
Always ensure a safe, well-balanced footing.
Operate the brush cutter in such a manner as to avoid inhalation
of the exhaust gases. Never run the engine in enclosed rooms
(risk of suffocation and gas poisoning). Carbon monoxide is an
odorless gas. Always ensure there is adequate ventilation.
Stop the engine when resting and when leaving the brush
cutter unattended. Place it in a sale location to prevent danger
to others, setting fire to combustible materials, or damage to the
machine.
Never lay down the hot brush cutter onto dry grass or onto any
combustible materials.
The cutter blade must be used with its appropriate guard.
Never run the tool without this guard!
All protective parts and guards supplied with the machine must
be used during operation.
Never operate the engine with a faulty exhaust muffler.
Stop the engine during transport.
During transport over long distances the tool protection included
with the equipment must always be used.
Put the brush cutter in upright position and fix it during care or
truck transportation to avoid damage.
When transporting the brush cutter, ensure that the fuel tank is
completely empty, to avoid fuel leakage.
Refuelling
To reduce the risk of fire and bum injury, handle fuel with care it
is highly flammable, Stop the engine during refuelling, keep well
away from open flame and do not smoke.
Avoid skin contact with petroleum products. Do not inhale fuel
vapor. Always wear protective gloves during refuelling.
Change and clean protective clothing at regular intervals.
Take care not to spill either fuel or oil. Always wipe unit dry
before starting engine. Allow wet cloths to dry before dispos-
ing in proper, covered container to prevent spontaneous
combustion.
Avoid any fuel contact with your clothing. Change your clothing
immediately if fuel has spilled on it (danger hazard).
Inspect the fuel cap at regular intervals making sure that stays
securely fastened.
Carefully tighten the locking screw of the fuel tank. Change
locations to start the engine (at least 10ft. or 3 meters away
from the place of refueling).
Never refuel in closed rooms. Fuel vapors accumulate at
ground level (risk of explosions).
Only transport and store fuel in approved containers. Make
sure stored fuel is not accessible to children.
Do not attempt to refuel a hot or a running engine.
When mixing gasoline with two-stroke engine oil, use only
gasoline which contains no ethanol or methanol (types of
alcohol). This will help to prevent damage to fuel lines and other
engine parts.
Resting
Transport
Refuelling
Maintenance
Tool Repiacement
3m (10FT)
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita EBH341R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info