Bedienungsanleitung Makita FS 2700 (Seite 4 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

448414

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

Explanation of general view

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change without

notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

ENE033-1

The tool is intended for screw driving in wood, metal and

plastic.

Power supply

ENF002-1

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

SPECIFIC SAFETY RULES GEB017-2

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to

screwdriver safety rules. If you use this power tool

unsafely or incorrectly, you can suffer serious

personal injury.

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring or its own cord.

Fasteners contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immediately

after operation; they may be extremely hot and

could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Depth adjustment

For Model FS2700 only (Fig. 1)

When you wish to drive self drilling screws, etc., adjust the

depth as follows. Turn the locator to adjust the depth.

Adjust the locator to create a distance of approximately

1 mm from the tip of the front cap (which works in

conjunction with the locator) to the base of the screw

head. One full turn of the locator equals 1 mm change in

depth. (Fig. 2 & 3)

Switch action (Fig. 4)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

1. Locator

2. Front cap

3. Switch trigger

4. Lock button

5. Lamp

6. Reversing switch lever

7. Adjusting ring

8. Pointer

9. Hook

10. Bit

11. Sleeve

Model FS2700 FS2701

Capacities

Self drilling screw 6 mm

Machine screw 8 mm

Wood screw 6.2 mm

No load speed (min

-1

)0 - 2,500

Overall length 301 mm 283 mm

Net weight 1.8 kg 1.7 kg

Safety class /II

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita FS 2700 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info