693732

Makita HG5030 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
4
English
Work area
Q Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
Q Do not operate power tools in explosive atmo-

liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Q Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Q Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
Q Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
Q Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase risk of electric shock.
Q Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
Q When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
Q If operating a power tool on a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
Q Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
Q Use safety equipment. Always wear eye pro-
tection. Safety equipment such as dust mask,
non-skid safety shoes, hand hat, or hearing
protection used whenever conditions require will
reduce personal injuries.
Q Avoid accidental starting.Ensure the switch is
in the off position before plugging in.Carrying
power tools with your nger on the switch or plug-
ging in power tools that have the switch on invites
accidents.
Q Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
Q Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Q Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
Q If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust related hazards.
Power tool use and care
Q Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate of which it was designed.
Q Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
Q Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
Q Store idle power tool out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool of these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
Q Maintain power tools. Check for misalignment
or sticking of moving parts, breakage of parts
and other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
Q Keep cutting tools sharp and clean. Properly
maintained cutting tools with cutting edges are
less likely to stick and are easier to control.
Q Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different from
intended could lead to a hazardous situation.
Service
Q 
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
ADDITIONAL SAFETY
INSTRUCTIONS FOR HEAT GUN
Q Do not place your hand over the air vents or
block the vents in any way.
Q The nozzle and accessories of this tool
become extremely hot during use. Let these
parts cool down before touching.
Q Always switch the tool off before putting it
down.
Q Do not leave the tool unattended while it is
switched on.
Q 
with care.
Q Heat may be conducted to combustible materi-
als that are out of sight. Do not use in a damp

present or near combustible materials.
Q Allow the tool to cool fully before storing.
… 4 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita HG5030 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info