78785
6
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
6
ENGLISH
Explanation of general view
1 Switch trigger
2 Lock button
3 Reversing switch lever
4 Rotation with hammering
5 Action mode changing knob
6 Rotation only
7 Hammering only
8Tighten
9 Loosen
10 Side grip (auxiliary handle)
11 Bit shank
12 Bit grease
13 Bit
14 Chuck cover
15 Depth gauge
16 Dust cup
17 Clamping screw
18 Coupling hole
19 Coupling rod
20 Hose
21 Hose port
22 Dust exhaust port
23 Frame
24 Stopper
25 Drilling depth
26 Complete contact with the
surface
27 Fastener
28 Cap
29 Dust exhaust
30 Blow-out bulb
31 Chuck adapter
32 Keyless drill chuck
SPECIFICATIONS
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work. It
is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
ROTARY HAMMER SAFETY WARNINGS
GEB007-7
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4. Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5. Be sure the bit is secured in place before opera-
tion.
Model HR2432
Capacities
Concrete
Tungsten-carbide tipped bit 24 mm
Core bit 54 mm
Diamond core bit 65 mm
Steel 13 mm
Wood 32 mm
Dust extraction capacities
Max. drilling depth 100 mm
(Adjusting depth) (0 – 100 mm)
Max. bit diameter 25 mm
Max. bit length 270 mm
Dust bag capacity 3.7 L
No load speed (min
–1
)01,000
Blows per minute 0 – 4,500
Overall length 407 mm
Net weight 3.2 kg
Safety class /II
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita HR 2432 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Makita HR 2432

Makita HR 2432 Bedienungsanleitung - Englisch, Holländisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info