Bedienungsanleitung Makita JS 1000 (Seite 4 von 28) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

448563

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see that

the switch lever actuates properly and returns to the

“OFF” position when the rear of the switch lever is

depressed.

• Switch can be locked in “ON” position for ease of oper-

ator comfort during extended use. Apply caution when

locking tool in “ON” position and maintain firm grasp on

tool.

To start the tool, slide the switch lever toward the “I (ON)”

position. For continuous operation, press the front of the

switch lever to lock it.

To stop the tool, press the rear of the switch lever, then

slide it toward the “O (OFF)” position.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

For JS1601 Only

Adjusting the blade clearance (Fig. 2 & 3)

Adjust the clearance between the side blade and the

center blade according to the thickness of the workpiece.

First use a hex wrench to loosen the screw.

Then use the hex wrench to adjust the clearance by tight-

ening or loosening the bolt. There may be a slight differ-

ence between clearances of both sides of the center

blade.

Check the smaller clearance with the thickness gauge

and adjust it.

When using the thickness gauge to adjust the blade

clearance, refer to the table.

After adjusting the clearance, tighten the screw securely.

Storing hex wrench (Fig. 4)

Store the hex wrench as shown in the figure when not in

use.

OPERATION

Lubrication (Fig. 5)

Before operation, lubricate the contact point of the center

blade and the pin. To keep good cutting performance,

also use a cutting lubricant from time to time during oper-

ation.

Operation (Fig. 6 & 7)

Always hold the tool firmly with one hand on housing. Do

not touch the metal part.

Turn the tool on and set front ends of the side blades on

the workpiece. Now simply move the tool forward, keep-

ing the side blades flush with the workpiece surface.

NOTE:

• When cutting a small portion of the workpiece, you may

have difficulty completing the end of the cut. In that

case, try to cut it again, pulling the workpiece back

slightly.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Center blade

• Side blade R

• Side blade L

•Hex wrench

• Thickness gauge

Workpiece thickness (mm)

Marking on thickness

gauge

Less than 0.8 0.5

0.8 – 1.3 1.0

More than 1.3 1.5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita JS 1000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info