Bedienungsanleitung Makita PO6000C (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691394

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

5 ENGLISH

3.

Do not use accessories which are not specically

designed and recommended by the tool manufac-

turer.Justbecausetheaccessorycanbeattachedto

yourpowertool,itdoesnotassuresafeoperation.

4. The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool.Accessoriesrunningfasterthan

theirratedspeedcanbreakandyapart.

5. The outside diameter and the thickness of your

accessory must be within the capacity rating

of your power tool.Incorrectlysizedaccessories

cannotbeadequatelyguardedorcontrolled.

Threaded mounting of accessories must match

the spindle thread. For accessories mounted

by anges, the arbour hole of the accessory

must t the locating diameter of the ange.

Accessoriesthatdonotmatchthemounting

hardwareofthepowertoolwillrunoutofbalance,

vibrateexcessivelyandmaycauselossofcontrol.

7. Do not use a damaged accessory. Before each

use inspect the accessory such as backing

pad for cracks, tear or excess wear. If power

tool or accessory is dropped, inspect for

damage or install an undamaged accessory.

After inspecting and installing an accessory,

position yourself and bystanders away from

the plane of the rotating accessory and run the

power tool at maximum no-load speed for one

minute.Damagedaccessorieswillnormallybreak

apart during this test time.

Wear personal protective equipment.

Depending on application, use face shield,

safety goggles or safety glasses. As appropri-

ate, wear dust mask, hearing protectors, gloves

and workshop apron capable of stopping small

abrasive or workpiece fragments.Theeyepro-

tectionmustbecapableofstoppingyingdebris

generatedbyvariousoperations.Thedustmask

orrespiratormustbecapableofltratingparticles

generatedbyyouroperation.Prolongedexposure

tohighintensitynoisemaycausehearingloss.

9. Keep bystanders a safe distance away from

work area. Anyone entering the work area

must wear personal protective equipment.

Fragmentsofworkpieceorofabrokenaccessory

mayyawayandcauseinjurybeyondimmediate

areaofoperation.

10. Position the cord clear of the spinning acces-

sory.Ifyoulosecontrol,thecordmaybecutor

snaggedandyourhandorarmmaybepulledinto

thespinningaccessory.

11. Never lay the power tool down until the acces-

sory has come to a complete stop.Thespinning

accessorymaygrabthesurfaceandpullthe

powertooloutofyourcontrol.

12. Do not run the power tool while carrying it at

your side.Accidentalcontactwiththespinning

accessorycouldsnagyourclothing,pullingthe

accessoryintoyourbody.

13. Regularly clean the power tool’s air vents.The

motor’sfanwilldrawthedustinsidethehousing

andexcessiveaccumulationofpowderedmetal

may cause electrical hazards.

14. Do not operate the power tool near ammable

materials.Sparkscouldignitethesematerials.

15. Do not use accessories that require liquid

coolants.Usingwaterorotherliquidcoolants

mayresultinelectrocutionorshock.

Kickback and Related Warnings

Kickbackisasuddenreactiontoapinchedorsnagged

rotatingwheel,backingpad,brushoranyotheracces-

sory.Pinchingorsnaggingcausesrapidstallingofthe

rotatingaccessorywhichinturncausestheuncon-

trolledpowertooltobeforcedinthedirectionopposite

oftheaccessory’srotationatthepointofthebinding.

Forexample,ifanabrasivewheelissnaggedorpinched

bytheworkpiece,theedgeofthewheelthatisenteringinto

thepinchpointcandigintothesurfaceofthematerialcaus-

ingthewheeltoclimboutorkickout.Thewheelmayeither

jumptowardorawayfromtheoperator,dependingon

directionofthewheel’smovementatthepointofpinching.

Abrasivewheelsmayalsobreakundertheseconditions.

Kickbackistheresultofpowertoolmisuseand/or

incorrectoperatingproceduresorconditionsandcanbe

avoidedbytakingproperprecautionsasgivenbelow.

1. Maintain a rm grip on the power tool and

position your body and arm to allow you to

resist kickback forces. Always use auxiliary

handle, if provided, for maximum control over

kickback or torque reaction during start-up.

Theoperatorcancontroltorquereactionsorkick-

backforces,ifproperprecautionsaretaken.

2. Never place your hand near the rotating acces-

sory.Accessorymaykickbackoveryourhand.

3. Do not position your body in the area where

power tool will move if kickback occurs.

Kickbackwillpropelthetoolindirectionopposite

tothewheel’smovementatthepointofsnagging.

4. Use special care when working corners, sharp

edges etc. Avoid bouncing and snagging the

accessory.Corners,sharpedgesorbouncing

haveatendencytosnagtherotatingaccessory

andcauselossofcontrolorkickback.

5. Do not attach a saw chain woodcarving blade

or toothed saw blade. Such blades create fre-

quentkickbackandlossofcontrol.

Safety Warnings Specic for Polishing Operations

Do not allow any loose portion of the polishing

bonnet or its attachment strings to spin freely.

Tuck away or trim any loose attachment strings.

Looseandspinningattachmentstringscanentan-

gleyourngersorsnagontheworkpiece.

Additional Safety Warnings

1. Do not leave the tool running. Operate the tool

only when hand-held.

Check that the workpiece is properly supported.

3.

If working place is extremely hot and humid, or

badly polluted by conductive dust, use a short-cir-

cuit breaker (30 mA) to assure operator safety.

4. Do not use the tool on any materials contain-

ing asbestos.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with

product (gained from repeated use) replace strict adher-

ence to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

Makita PO6000C Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info