Bedienungsanleitung Makita TM3010CX2J (Seite 5 von 14) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711184

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1 Slide switch

2 Dial

3 Holder bolt

4 Lock lever

5 Holes in the application tool

6 Protrusions of the tool flange

7 Adapter

8 Joint

9 Nozzle band

10 Dust nozzle

11 Dust attachment

12 Felt ring

13 Pad

14 Protrusions

15 Holes

SPECIFICATIONS

• Due to our continuing program of research and

development, the specifications herein are subject to

change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE080-1

Intended use

The tool is intended for sawing and cutting wood, plastic,

gypsum, non-ferrous metals, and fastening elements (e.

g. unhardened nails and staples). It is also intended for

working soft wall tiles, as well as dry sanding and

scraping of small surfaces. It is especially for working

close to edge and flush cutting.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future

reference.

GEB096-3

MULTI TOOL SAFETY WARNINGS

1. This power tool is intended to function for

sawing, cutting, grinding and sanding. Read all

safety warnings, instructions, illustrations and

specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

3. Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body

leaves it unstable and may lead to loss of control.

4. Position the cord clear of the spinning

accessory. If you lose control, the cord may be cut

or snagged and your hand or arm may be pulled into

the spinning accessory.

5. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

6. Avoid cutting nails. Inspect workpiece for any

nails and remove them before operation.

7. Hold the tool firmly.

8. Make sure the application tool is not contacting

the workpiece before the switch is turned on.

9. Keep hands away from moving parts.

10. Do not leave the tool running. Operate the tool

only when hand-held.

11. Always switch off and wait for the blade to come

to a complete stop before removing the blade

from the workpiece.

12. Do not touch the application tool or the

workpiece immediately after operation; they may

be extremely hot and could burn your skin.

13. Do not operate the tool at no-load unnecessarily.

14. Always use the correct dust mask/respirator for

the material and application you are working

with.

15. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

16. This tool has not been waterproofed, so do not

use water on the workpiece surface.

17. Ventilate your work area adequately when you

perform sanding operations.

18. Use of this tool to sand some products, e.g.

leaded paint surfaces, wood and metals could

expose user and bystanders to dust containing

hazardous substances. Use appropriate

respiratory protection.

19. Be sure that there are no cracks or breakage on

the pad before use. Cracks or breakage may

cause a personal injury.

Model TM3010C

Oscillation per minute 6,000 – 20,000 (min

–1

)

Oscillation angle, left/right 1.6° (3.2° total)

Overall length 283 mm

Net weight

without dust extraction attachment 1.6 kg

with dust extraction attachment 1.7 kg

Safety class /II

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita TM3010CX2J Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info