598785
3
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Technical data
UT 1
200
Rated voltage:
110 V ~
230 V ~
Power input:
850 W
960 W
1050 W
Rated speed:
0–400 rpm
0–360 rpm
0–
560 rpm
Frequency: 50 Hz
Tool holder:
M 14
Safety class: II
Safety degree: IP 20
Weight according to EPTA
Procedure 01/2003:
3,2 kg
This manual shall be subject to modification without prior notice in the course of
developments and technical progress.
Note: The technical data may differ depending on the country.
Symbols
The following symbols are used for the equipment. It is important to know their
meaning before you use the tool.
Intended use
The mixer UT 1200 is used to stir and mix p
aint, glue, tile adhesive etc. u
amount of approximately 30kg. The diameter of the stirrers that are used should
not exceed 120mm.
The mixer UT 1400
is suitable for stirring and mixing paints, plaster, mortar, tile
adhesive, levelling and smoothing compounds, and similar materials up to a
quantity of 50kg. The diameter of the mixing agitators must not exceed a value of
140mm.
The user shall be respon
sible for damages caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions
enclosed shall be observed.
ENGLISH
Read instructions
Work with concentration and care.
Keep
your workplace clean and avoid hazardous situations.
Precautions shall be taken to protect operators.
Double protective insulation
UT 1
4
00
110 V ~
230 V ~
1050 W
1300 W
560 rpm
0–580 rpm
5,2 kg
This manual shall be subject to modification without prior notice in the course of
The following symbols are used for the equipment. It is important to know their
aint, glue, tile adhesive etc. u
p to an
amount of approximately 30kg. The diameter of the stirrers that are used should
is suitable for stirring and mixing paints, plaster, mortar, tile
adhesive, levelling and smoothing compounds, and similar materials up to a
quantity of 50kg. The diameter of the mixing agitators must not exceed a value of
sible for damages caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions
your workplace clean and avoid hazardous situations.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita UT 1400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info