Bedienungsanleitung Makita VR 250D (Seite 3 von 11) (Englisch, Holländisch)

448709

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

Explanation of general view

1 Button

2 Battery cartridge

3Cover

4 Switch trigger

5 Slope

SPECIFICATIONS

Model VR250D

Vibrations per minute ....................................13,000 VPM

Vibration amplitude .............................................. 1.1 mm

Vibrating head

(diameter x length) .................................25 mm x 221 mm

Flexible shaft assembly length ............................ 800 mm

Overall length .................................................. 1,031 mm

Net weight (with battery cartridge) ........................ 2.9 kg

Rated voltage ....................................................D.C. 12 V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for removing bubbles from concrete

when casting concrete.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

ENC004-1

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

8. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car-

tridge when you do not use it for more than six

months.

ADDITIONAL SAFETY RULES

FOR TOOL

1. Always keep your hands and face away from

vibrating head when operating.

2. Switch off the tool immediately if you notice

abnormal noise or something faulty during oper-

ation.

3. Inspect the tool carefully for breakage, cracks or

deformation if you accidentally drop it or strike it

against something.

4. Do not charge the battery cartridge in locations

where lacquer, paint, benzene, thinner, gasoline,

gas or adhesive are stored/used.

5. Do not charge on cardboard or paper, cloth or

bedding, straw mats, carpeting, vinyl or the like.

6. Do not charge in a dusty place or where lint

accumulates.

7. Do not allow pieces of metal, water or other for-

eign objects to get into the charger port where

the charging terminals are located.

8. Do not carry the tool with finger on switch.

9. Do not set the tool down and switch it on. The

vibrating head may whip around out of control

and cause an accident.

10. Be careful not to allow water, wet concrete or the

like to get into the tool. Do not let the tool fall

into wet concrete.

11. Insert the vibrating head carefully between iron/

steel frames or reinforcing rods not to come in

contact with them.

12. Do not crush or twist the fexible hose.

13. Do not overly bend the flexible hose.

14. Use a wet cloth or the like to carefully wipe off

any wet concrete left on the tool after use. Extra

care should be given to thorough cleaning of the

vents, switch area, cover openings, etc.

SAVE THESE INSTRUCTIONS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita VR 250D Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info