678057
31
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Instructions for Use Product Maintenance
Common Faults
26
Faults Possible Reasons
The robot
cannot be
charged.
1.The electrodes between the main
body and the charging base are not
contacted properly.
2.The charging base is switched off
while the robot is switched on,
which leads to the loss of power.
1.Make sure that the electrodes
between the main body and the
charging base are properly
contacted.
2.Keep charging the robot when it
for next cleaning assignment.
The robot is
stuck during
work.
The robot may be stuck by wires/ca-
bles on the ground, hanging
curtains or obstacles around the
carpets.
The robot will try to get itself out
help it manually if it fails.
The robot
goes back to
recharge
without
finishing the
cleaning
work.
1.The robot detects that the power
-
cally goes back to recharge.
2.The robot works at dierent
speeds on dierent floor types. For
example, it works longer on wood
floors than on carpets.
1.Charge the robot.
of room environments, the
amount of garbage and dierent
cleaning modes.
The robot
does not
perform
cleaning
work
as scheduled.
1.The robot is not switched on and
the robot cannot perform cleaning
work as scheduled when it is
powered o.
2.The power level of the robot is too
low to work.
3.The robot is stuck or twined by
obstacles.
1.Turn on the robot.
2.Keep charging the robot when it
for next cleaning assignment.
3.Turn off the robot and clean the
dust box. Then turn over the robot
to clean its components, such as
wheels and side brushes.
Remote
control
range: 16.3
1.The remote control is short of or
out of power.
2.The robot is short of or out of
power.
3.The infrared ray is blocked
remote control or the infrared
receiver on the robot is contaminat-
ed.
devices that exist nearby.
2.Make sure that the robot is
switched on with enough power
remote control or the infrared
receiver on the robot with a clean
4.Avoid using the remote control
near other infrared devices.
Note: If the above methods cannot solve the problem, please reboot the robot.
If the problem cannot be solved by reboot, please contact sales@mamibot.com
Common Faults
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mamibot EXVAC660 Robot wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Mamibot EXVAC660 Robot

Mamibot EXVAC660 Robot Bedienungsanleitung - Deutsch, Englisch, Französisch, Italienisch, Spanisch - 84 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info