This section must be read carefully before any
connection is made to the mains supply.
WARNINGS
CE marking (only EU version)
This product is in conformity with the EMC
directive and low-voltage directive.
Equipment mains working system
Your Marantz product complies with the household
power and safety requirements in your area.
“/N1” Version product can be powered by 230 V AC
only.
IMPORTANT: (FOR/UK. version only)
This apparatus is fitted with an approved moulded 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
1. Remove fuse cover and fuse.
2. Fix new fuse which should be a BS1362 5A,
A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fitted in its
place. If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is used,
the fuse at the distribution board should not be
greater than 5A.
Note :
The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
HOW TO CONNECT A PLUG
The wires in the mains lead are colored in accordance
with the following code:
BLUE—“NEUTRAL” (“N”)
BROWN—“LIVE” (“L”)
1. The BLUE wire must be connected to the terminal
which is marked with the letter “N” or colored
BLACK.
2. The BROWN wire must be connected to the
terminal which is marked with the letter “L” or
colored RED.
3. Do not connect either wires to the earth terminal
in the plug which is marked by the letter “E” or by
the safety earth symbol or colored green or
green-and-yellow.
Before replacing the plug cover, make certain that
the cord grip is clamped over the sheath of the
lead — not simply over the two wires.
Copyright
Recording and playback of some material may require
permission. For further information refer to the
following:
- Copyright Act 1956
- Dramatic and Musical Performers Act 1958
- Performers Protection Acts 1963 and 1972
- Any subsequent statutory enactments and orders
First check the contents of the packaging. It should
contain the following:
- CD-Player CC4300
- Remote control unit (RC4300CC)
- Batteries (AAA size) x 2
- Audio cables (2 - with red and white plugs)
- Remote control cable (with orange plugs)
- Instructions
- Guarantee
If one of these components is missing, please inform
your supplier immediately. Save the packaging material
it may come in handy if you move the appliance.
Units shipped to the U.S.A. and Canada are designed
for operation on 120 V AC only.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTION :
To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
ATTENTION :
Pour eviter les choc electriques, introduire la lame la
plug large de la borne correspondante de la prise et
poussre jusqu'au fond.
For Your Safety
Unpacking
Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
Do not insert anything into the equipment through
the ventilation holes.
Do not handle the mains lead with wet hands.
Foreword
English
2
General Information
