Bedienungsanleitung Marantz ES7001 (Seite 7 von 25) (Englisch)

699725

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

ENGLISH

NAMES AND FUNCTIONS OF PARTS

uio!0!1!2 yt r e

FRONT PANEL

q ON/STANDBY button

Press this button to turn on the power.

When it is pressed again, the unit goes

into standby mode and the STANDBY

indicator i lights.

w Display window

Normally, the volume level indication (00-

60) is displayed.

e VOLUME + button

Press this button to increase the volume.

Keeping this button pressed increases the

volume successively.

r VOLUME – button

Press this button to decrease the volume.

Keeping this button pressed decreases

the volume successively.

t SUB WOOFER indicator

The indicator lights in green when

subwoofer output is activated by pressing

the SUBWOOFER button on the remote

controller.

The indicator goes out when subwoofer

output is set to off by pressing the

SUBWOOFER button on the remote

controller.

The subwoofer output is set to on and the

indicator is lit as the factory-setting mode.

Note:

Before installing this unit, connect a

commercially available or optional Marantz

subwoofer with a built-in amplifier.

y NIGHT MODE indicator

The indicator lights in green when the

night mode function is activated.

The indicator goes out when the night mode

function is canceled by pressing the NIGHT

MODE button on the remote controller.

Note:

The night mode function can be activated

only when the Dolby D (Digital) indicator

is lit blue.

u MODE indicator

The indicator lights in blue when the

binaural mode is activated. The indicator

goes out when the binaural mode is

canceled by pressing the MODE button on

the remote controller.

Note:

The binaural mode can be set when an

audio source recorded in binaural mode

is played.

i STANDBY indicator

The indicator lights in red when the unit is

in standby mode.

o Dolby PL II indicator

The indicator lights in green when 2-

channel signal is input and the Dolby Pro

Logic

II mode is set to Pro Logic II MOVIE

or Pro Logic

II MUSIC.

When Dolby Pro Logic

II mode is set to

OFF by pressing the Dolby PL

II button

on the remote controller, this indicator

goes out.

!0 Dolby D indicator

When a Dolby digital signal is input, this

indicator lights in blue.

!1 dts/AAC/PCM indicator

The indicator lights in the following colors

according to the format of digital signal

input from the connected equipment:

dts signal: red

AAC signal: yellow

PCM signal: green

The indicator goes out when the A1 or A2

button on the remote controller is pressed

to select an analog input signal.

!2 INPUT SELECTOR button

Press this button to select the input source

to be played.

Each press of the button changes the

indication in the display window as shown

below.

The factory-preset setting is “d1.”

A2 (AUX)

A1 (VCR)

H2(HDMI 2)

H1(HDMI 1)

d1(DVD)

d2 (TV)

d3 (GAME)

ES7001_N_01_Eng.indd 5ES7001_N_01_Eng.indd 5 07.8.22 10:59:25 AM07.8.22 10:59:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz ES7001 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info