Bedienungsanleitung Marantz NR1501 (Seite 46 von 50) (Englisch)

453906

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERSOTHERS

ENGLISH

OTHERS

FM TUNER SECTION

Frequency Range ...........87.5 MHz to 108.0 MHz

Usable Sensitivity .................IHF 1.8 μV/16.4 dBf

Signal to Noise Ratio (Mono/Stereo)

............................................ 75 dB / 70 dB

Distortion (Mono/Stereo) ............... 0.3 % / 0.5 %

Stereo Separation .............................1 kHz 35 dB

Alternate Channel Selectivity ...± 300 kHz 60 dB

Image Rejection ............................ 98 MHz 60 dB

Tuner Output Level (1 kHz, ± 75 kHz Dev)

......................................................500 mV

AM TUNER SECTION

Frequency Range ................ 530 kHz to 1710 kHz

Signal to Noise Ratio ..................................40 dB

Usable Sensitivity (Loop Antenna) ......400 μV/m

Distortion ..................... 400 Hz, 30 % Mod. 0.7 %

Selectivity .....................................± 18 kHz 70 dB

AUDIO SECTION

Power Output (20 Hz – 20 kHz/THD=0.08%)

Front L&R (8 ohm load, Per channel) ..50 W

Center (8 ohm load, Per channel) ........50 W

Surround L&R (8 ohm load, Per channel)

..........................................................50 W

Surround Back L&R

(8 ohm load, Per channel) .....................50 W

Power Output

Front L&R (6 ohm load, Per channel)

....60 W

Center (6 ohm load, Per channel) ........60 W

Surround L&R (6 ohm load, Per channel)

..........................................................60 W

Surround Back L&R

(6 ohm load, Per channel) .....................60 W

Input Sensitivity/Impedance ...... 200 mV / 47 kΩ

Signal to Noise Ratio(Analog Input / Pure Direct)

.......................................................100 dB

Frequency Response

(Analog Input / Pure Direct)

...........................8 Hz to 100 kHz (± 3 dB)

(Digital Input / 96 kHz PCM)

.............................8 Hz to 45 kHz (± 3 dB)

VIDEO

Television Format .......................................NTSC

Input Level/Impedance ...................1 Vp-p / 75 Ω

Output Level/Impedance ................1 Vp-p / 75 Ω

Video Frequency Response

.............................. 5 Hz to 8 MHz (- 1 dB)

Video Frequency (Component)

............................ 5 Hz to 80 MHz (- 1 dB)

S/N .............................................................60 dB

HDMI

Version ......................................1.3a [INPUT]

.................................. 1.3a [OUTPUT]

GENERAL

Power Requirement ....................AC 120 V 60 Hz

Power Consumption .................................250 W

Standby Power Consumption ....................0.5 W

SPECIFICATIONS

Speciﬁ cations subject to change without prior

notice.

USING HEADPHONES

Take care not to turn up the volume too high while

you are using headphones. Listening to sound

at high-volume levels for prolonged periods can

negatively affect your hearing.

Recording and playback of any material may

require consent. For further information refer to the

following:

— Copyright Act 1956

— Dramatic and Musical Performers Act 1958

— Performers Protection Acts 1963 and 1972

— Any subsequent statutory enactments and

orders

CLEANING OF EQUIPMENT

EXTERNAL SURFACES

The exterior ﬁ nish of your unit will last indeﬁ nitely

with proper care and cleaning, Never use scouring

pads, steel wool, scourging powders or harsh

chemical agents (e.g., lye solution), alcohol, thinner,

benzine, insecticide or other volatile substances as

these wil mar the ﬁ nish of the equipment. Likewise,

never use cloths containing chemical substances. If

the equipment get dirty, wipe the external surfaces

with a soft, lint-free cloth.

If the equipment becomes heavily soiled:

• dilute some washing up liquid in water, in a ratio

of one part detergent to six parts water.

• dip a soft, lint free in the solution and wring the it

is damp.

• wipe the equipment with the damp cloth.

• dry the equipment by wiping it with a dry cloth.

REPAIRS

Only the most competent and qualiﬁ ed service

technicians should be allowed to service the

factory-trained warranty station personnel have

the knowledge and special facilities needed for

repair and calibration of this precision equipment.

After the warranty period has expired, repairs will

be performed for a charge if the equipment can be

returned to normal operation.

In the event of difﬁ culty, refer to your dealer or write

directly to the nearest location to you that is listed

on the Marantz Authorized Service Station list. If

writing, please include the model and serial number

of the equipment together with a full description of

what you think is abnormal about the equipment’s

behavior.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz NR1501 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz NR1501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info