Bedienungsanleitung Marantz st6000 (Seite 6 von 13) (Englisch)

161034

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

ENGLISH

3. FINE, MANUAL TUNING

This function used for selection the manual tuning of the fine tuning

mode.

Fine tuning mode is available only in the FM mode.

1. Press the TUNING MODE button.

2. Every time you press this button, the following will be displayed

FINE ⇔ MANUAL.

a. In FINE (Tuning) mode

When you try press the TUNING 5∞ button, the frequency will be se-

lected by 10 kHz step to ±50 kHz. Then, it will automatically be set to

the MANUAL mode in 4 second.

b. In MANUAL (Tuning) mode

Press the TUNING 5∞ button in the FM band, then the frequency

will be selected by 50 kHz step.

2. In the MW band, the frequency will be selected by 9 kHz step.

3. In the LW band, the frequency will be selected by 1 kHz step.

4. DIRECT TUNING

(The following operation can be performed by connecting the RC-5 BUS

system.)

1. Press the F. DIRECT (frequency direct) button

2. Next press the numeric (0 to9) button.

For example: FM 98.10 MHz

a. FM is chosen with BAND (or TUNER) button on remote controller.

b. Press the F. DIRECT (Frequency Direct) button.

c. Press the numeric button of “9”.

d. Press the numeric button of “8”.

e. Press the numeric button of “1”.

f. Press the numeric button of “0”.

g. The display fixed 98.10 MHz and broadcast station received.

MW, LW band is same as above operations.

5. ADJUSTING CURRENT TIME

You can adjust the current time regardless of power on/standby.

1. Press the TIME ADJ button. Then “Hour display” indicator will blink.

2. The hour is set with the TUNING 5∞ button.

3. Press the NEXT button. Then “minute display” indicator will blink.

4. The minute is set with the TUNING 5∞ button.

5. Press the NEXT button.

OPERATIONS

1. MEMORY PRESETTING

a. Manual operation

For example: presetting FM 90.1 M Hz, to Preset number. 10

1. Select the FM by using the BAND button.

2. Tune to 90.1 MHz by using the TUNING 5∞ button.

3. Press the MEMO button briefly (for less than 0.5 second) Then,

“MEMO” will bricking in the florescent tube display.

4. Select the preset number by using the TUNING 5∞ button.

5. MEMO button pushed again, 90.1 MHz (broadcast station) was able

to be memorized in number 10 by this.

Note:

Be sure to select the antenna A or B memorization when you preset

manual memory in FM broadcast.

b. Automatic operation

Select the desired broadcasting (FM, AM, or LW) by using the BAND

button.

2. Press the MEMO button slightly longer than 1.5 second does.

Then, broadcasting will be automatically received, and as many

broadcasting station are received well will be memorized preset num-

ber-01 after another

3. Check the broadcasting station by using the TUNING 5∞ button.

Note:

1. In the case of FM automatic presetting, the antenna A, B selector

is set to “A” automatically,

And the broadcasting station is scanned twice. The stations that

have stronger broadcasting signal are preset in the first time.;

weaker ones are preset in the second time.

2. If a new broadcasting station is preset into a channel the broad-

casting station which has been preset into that position aria will be

automatically erased.

3. In mountainous or remote area broadcasting stations which have

weak broadcasting signals cannot be automatically preset into the

memory.

4. Max. 30 broadcasting stations each for FM, AM(MW and LW) bands

can be preset.

2. LISTENING TO RADIO

1. Select FM, AM, or LW by using the BAND button.

2. Tune to the desired broadcast by using the TUNING or PRESET

5∞ button.

3. FM broadcasting is set up to “STEREO” mode

If the broadcasting signal is weak, or if there is a large amount of

interference in FM stereo broadcast, change the monaural mode by

presetting the FM MODE button.

4. Select the IF BAND (FM bandwidth)

Select the NARROW bandwidth by pressing this button if the broad-

cast signal is interfered with adjacent broadcast in the FM .

blink

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz st6000 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info