168923
15
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
15
OPERATION
BASIC OPERATION
Turn the unit on/off
When all the connection is finished, press
button on the front panel or
on the remote
control will turn the unit on. When the unit is on,
press
to turn the unit off.
Fold down the front panel
Press the release button
on the front panel,
the panel will be folding down.
Sound adjustment
Repeatedly press the volume knob on the front
panel of the unit or
SEL
on the remote control to
enter into the AUDIO SETUP and SYSTEM
SETUP.
In every setup interface, press
/ buttons
on the front panel or on the remote control to
select the item up or down, then use the volume
knob on the front panel or
VOL+/-
buttons on the
remote control to adjust the selected item.
LOUD --- ON or OFF;
EQ --- change the equalization mode, switch
among ROCK, POP, CLASSIC, JAZZ and
FLAT;
DISP --- ON or OFF
When DISP OFF, the CLOCK will
disappear.
Remote sensor
There is a remote sensor on the front panel. You
can point the remote control to the remote sensor
and press functions keys on the remote control to
control the unit.
Reset function
Press the
button on the front panel to fold
down the panel, then you will see the
RST
button
on the housing of the unit.
It must be activated with either a ballpoint pen or
thin metal object. The reset button is to be
activated for the following reasons:
1.Initial installation of the unit when all wiring
is
completed.
2.All the function buttons do not work.
3. Error symbol on the display.
Volume level adjustment
Rotating the volume knob on the front panel
clockwise or anticlockwise or pressing
VOL+/-
buttons on the remote control to adjust the
volume level.
When you adjust the volume the current value of
the volume will be displayed on the screen.
Pressing
MUTE
button on the front panel or
button on the remote control will mute the
sound. Press it again will resume the sound.
Mode selection
Press
MODE
button on the front panel or
MODE
on the remote control to select the desired mode
to enjoy. Such as DVD, radio, USB, SD mode.
Brake function
If the brake wire (pink wire) isn’t connected to th
e
ground (when driving), the picture will not be
shown on the screen in DVD mode for safety
purpose. Only the audio will be heard.
Note: Only when parking, the DVD in picture can
be seen on the screen. When driving, the warning
information will be displayed.
AUDIO SETUP
BASS
0
TREBLE
0
BALANCE 0
FADER 0
EQ FLAT
LOUD OFF
SYSTEM SETUP
DISP
ON
CLOCK 00:04
DEFAULT RESTORE
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marquant mcr 1283 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info