Bedienungsanleitung Marshall DSL100HR (Seite 3 von 38) (Deutsch, Englisch, Französisch, Spanisch)

705281

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

PLEASE READ THIS MANUAL CAREFULLY

BEFORE PLUGGING IN.

FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

KEEP THESE INSTRUCTIONS.

This device complies with part 15 of the FCC Rules. Operaon is subject to the

following two condions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operaon.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protecon against harmful interference in a residenal

installaon.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instrucons, may cause harmful

interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or television

recepon, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modicaons not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

This device complies with CAN ICES-3(B)/NMB-3(B)

COMPLIANCE STATEMENT

WARNING! IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

WARNING:

Before going any further, make sure that

your amplier is compable with your

mains electricity supply. If you have any

doubt, please seek help from a qualied

technician – your Marshall dealer can

help you in this respect.

MAINS INPUT & FUSE:

The specic mains input voltage

rang that your amplier has been

manufactured for is indicated on the

rear panel of the amplier. Your amplier

is provided with a detachable mains

(power) lead, which should be connected

to the MAINS INPUT socket on the rear

panel of the amplier (Rear Panel Funcon

#26). The correct value and type of

mains fuse is specied on the rear panel

of the amplier.

NEVER aempt to bypass the fuse or t

one of the incorrect value or type.

TRANSPORTING YOUR EQUIPMENT:

Please ensure that your amplier is

switched o, unplugged from the mains

electricity supply and all removable

cables have been disconnected from

your equipment before aempng to

move it.

IMPORTANT SET UP INFORMATION:

1. When using the DSL40CR, or the

DSL100HR with an extension

speaker cabinet(s), make sure

that the speaker cabinet(s) is

connected to the correct impedance

loudspeaker jack socket(s) on the

rear panel of the amplier. See

the LOUDSPEAKERS guide in this

manual for specic informaon

regarding impedance matching (Rear

Panel Funcon #33).

WARNING:

Failure to do the above may damage

your amplier. When connecng a

speaker cabinet make sure that you use

a proper speaker cable. Never use a

screened (shielded) guitar cable for this

purpose.

2. Ensure that the POWER switch is

set to the OFF posion (Front Panel

Funcon #25).

3. Ensure the OUTPUT switch is in

the STANDBY posion (Front Panel

Funcon #24).

4. Connect the supplied mains (power)

lead into the MAINS INPUT (Rear

Panel Funcon #26) rst and then into

an electricity outlet.

5. Ensure that the volume controls on

the front panel are set to zero (Front

Panel Funcons #19 & #21).

6. Plug your guitar into the INPUT jack

socket (Front Panel Funcon #1).

7. Switch the amplier ON using

the POWER switch, wait for a

few minutes and then switch the

OUTPUT switch to either the LOW

or HIGH posion.

8. Turn the selected channel volume

up to your preferred level and your

amplier is ready to play.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marshall DSL100HR Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info