442771
3
Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
WARNING! - Important safety instructions
WARNING: This apparatus must be earthed!
A PLEASE read this instruction manual carefully before switching on.
B ALWAYS use the supplied mains lead, if a replacement is required please contact your authorised Marshall Dealer.
C NEVER attempt to by-pass the fuses or fit ones of the incorrect value.
D DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
E Refer all servicing to qualified service personnel including replacement of fuses and valves.
Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped.
F NEVER use an amplifier in damp or wet conditions. No objects filled with liquids should be placed on the
apparatus.
G ALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.
H Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and at the
point where they exit from the apparatus.
I DO NOT switch the amplifier on without the loudspeaker connected.
J ENSURE that any extension cabinets used are of the correct impedance.
Note: This equipment has been tested and found to comply with the requirements of the EMC directive (Environments
E1, E2 and E3 EN 55103-1/2) and Low Voltage directive in the E.U.
EUROPE ONLY - Note: The Peak Inrush current for the DSL50 is 33 amps and DSL100 is 40 amps.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance may void the
user’s authority to operate the equipment.
Note: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the DSL50 and
DSL100 are of a high quality screened type. These should not exceed 10 metres in length.
Always use a non-screened Marshall approved speaker lead with the DSL50 or DSL100 and extension cabinets.
WARNING: Do not obstruct ventilation grilles and always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Follow all instructions and heed all warnings - KEEP THESE INSTRUCTIONS !
ENGLISH
3
!
JCM 2000 Introduction
The Marshall 1959 Super Lead Plexi head and the JCM 800 Master Volume 2203 are recognised the world over as
benchmarks in tone, feel, musical power and sheer size of sound. Imagine then, an amp which is like two footswitchable
1959 Super Leads in one, with the addition of reverb plus extra gain to take you into 2203 territory and beyond. If this
sounds like a dream, it is no longer - now that the JCM 2000 Dual Super Lead range is here.
The 100 Watt DSL 100 and 50 Watt DSL 50 Dual Super Lead heads feature two footswitchable channels, Classic Gain /
Channel A and Ultra Gain / Channel B. As the names imply, each channel has a very different character, with Classic Gain
/ Channel A taking you from a clean to crunch 1959 and then, via a mode switch, up to a 2203 style brute. Ultra Gain /
Channel B takes you from a hot rodded 2203, via a mode switch, to a higher gain response with the addition of mid-boost.
Each channel also has its own individual Reverb level.
The amps also feature a Deep Switch and Tone Shift which are common to both channels. The Deep Switch adds a
resonant bass boost to your sound without muddying it up, while the Tone Shift selector shifts out the mid frequencies
making the amp ideal for brutal metal tones, especially when combined with high gain settings. Their all round versatility
and sheer size of sound make the DSL 100 and DSL 50 superb performance tools for today’s most demanding playing
situations and you can rest assured they are packed full of the famed Marshall TONE.
Please read this handbook carefully before plugging in.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marshall JCM 2000 (DSL 100, DSL 50) Valve Heads wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info