Bedienungsanleitung Marshall MG15 Series (Seite 5 von 8) (Englisch)

442819

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

5. Overdrive VOLUME control

Amazingly enough, this control adjusts the

volume of the Overdrive channel! The louder

this channel is set, the ‘looser’ the amplifier will

sound and feel. This behaviour is exactly what

a good all-valve amplifier does and is a result

of our proprietary FDD circuitry.

6. EQ BASS control

This control affects the bass or bottom end of

your sound. Increasing the bass control will add

warmth to your clean and balls to your

overdrive tones.

7. EQ CONTOUR control

This highly effective tone control works by

radically modifying the mid-range (body). The

tone can range from traditional and woody

sounding (setting at 10), to balls-to-the-wall

(setting at midway), to aggressive, ‘scooped’

and modern (setting at 0)…and all points in-

between.

8. EQ TREBLE control

This control affects the treble or top end of

your sound. Increasing the amount of treble will

give a glassy edge to your clean sounds and

increase the definition on low gain overdrive or

the amount of aggressive ‘fizz’ and ‘cut’ on high

gain tones.

9. FDD (Frequency Dependant

Damping) Switch

Marshall’s proprietary FDD circuit accurately

mimics the way an all-valve amplifier interacts

with the loudspeaker and adds a width and

depth to your sound which has been

unachievable in an affordable solid-state

amplifier…until now!

10. CD IN & EMULATED LINE OUT

jack

The MG15’s cleverly combine the Line Out

and CD Input functions. If you want to jam to

your favourite CD or tape, merely connect the

headphone output of your CD or tape player

here, adjust the CD / TAPE player’s volume to

match that of your guitar and ‘hey-presto’ –

you’ve got the perfect ‘play-along’ practice

system. Alternatively, you can use this socket

to connect the MG15 to your multi-track

recording machine and you’ll get a great

speaker emulated guitar sound direct to disk or

tape.

HELPFUL HINT: for ‘silent’ recording merely

plug an unconnected jack plug into the

headphone socket and you’ll disconnect the

MG15’s internal speaker.

11. EMULATED HEADPHONES jack

Plug your headphones here for a killer

speaker emulated sound! Doing this mutes

your MG15’s internal speaker for ‘silent’

practice.

12. POWER Switch & LED

The power switch turns your amplifier on and

off. The LED will be lit when your amplifier is on

and will not be lit when the amplifier is switched

off.

Note: Before connecting to the mains

electricity supply, always ensure that your

electricity supply is compatible with your

amplifier, as detailed on the rear panel.

Please ensure the amplifier is switched off

and unplugged from the mains electricity

supply before being moved.

13. Reverb LEVEL control

(MG15CDR only)

Increasing the Reverb Level control will mix

more of the naturally voiced spring reverb

signal into your sound – as you’ll find, you can

go from subtle to surf at the mere twist of this

control!

ENGLISH

MG15 Hbk multi 230V 1/3/02 9:55 am Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marshall MG15 Series Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info