Bedienungsanleitung Mastervolt Magic 24 12-20 (Seite 3 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

785629

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

Connections

For correct connection - see drawings “INSTALLATION”.

• Use reliable cord end terminals to fix the wires to the

DC-input and –output.

• See specifications for the recommended wire size.

• To minimize any EMC-interference we advise to

connect the negative pole of the supplying battery to

the ground.

Connect a momentary switch between the “switch”-

connection and the DC-output ground if you want to use

the remote switch function and/or the light dimmer

function (see drawing 1B, 2B, 3B).

Alarm contact

The alarm contact, right side connection on the back

(see drawings “DIMENSIONS”), is connected to the

contact. The contact is activated and connected to the

output ground in a normal situation, and will be

deactivated if the input voltage is too low (default 10.0V

or 20.0V), if the input voltage is too high (default 16.0V

or 32.0V), in case of overload or short-circuit. The

contact is also deactivated when the MAGIC is switched

off.

Operation

The converter operates automatically. Under normal

circumstances, there is no need for operation. Despite

its low no-load consumption, the converter should be

disconnected from the supplying battery when it is not in

use to protect the battery from discharging.

Refer to table “SWITCH OPERATION” for explanation of

the remote switch function / dimmer operation.

SWITCH OPERATION

Short

Converter switches off.

Press again to switch

on.

Long

After 1 sec. the output

voltage slowly

decreases to 4V or 8V.

Press again to increase

the voltage

Extended functions

Via the “QRS232 communication port” various settings

can be adjusted in terms of software to your specific

demands (control software and interface not included).

Check the Internet site www.mastervolt.com for

applications. Please mind that this plug is not intended

for connecting any remote panels or a battery

temperature sensor.

Battery charger

Three-stage charge curve: Stage A: BULK, for quick

charging from 0 to 80%, Stage B: ABSORPTION, the

battery is charged from 80 to 100%. Stage C: FLOAT,

battery is maintained in fully charged state.

Guarantee terms

Mastervolt guarantees that this converter was built

according to the legally applicable standards and

stipulations. During production and before delivery all

converters were exhaustively tested and controlled. If

you fail to act in accordance with the regulations,

instructions and stipulations in this user’s manual,

damage can occur and/or the converter will not fulfil the

specifications. This may mean that the guarantee will

become null and void.

The guarantee period is 2 years.

Liability

Mastervolt cannot be held liable for:

• Consequential damage resulting from the use of the

converter.

• Possible errors in the included manual and the

consequences of these.

• Use that is inconsistent with the purpose of the

product

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastervolt Magic 24 12-20 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info