Bedienungsanleitung Mastervolt MasterBus Philippi Interface (Seite 2 von 8) (Englisch)

785593

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

MasterBus – CANopen Interface / EN

1 GENERAL INFORMATION

1.1 USE OF THIS MANUAL

Reproduction, transfer, distribution or storage of part

or all of the contents in this document in any form

without the prior written permission of Mastervolt is

prohibited.

This manual serves as a guideline for the safe and

effective operation of the MasterBus Philippi

Interface, to be called Philippi Interface further in this

manual.

Keep this manual at a secure place!

1.2 GUARANTEE SPECIFICATIONS

Mastervolt guarantees that this product was built

according to the legally applicable standards and

stipulations. If you fail to act in accordance with the

regulations, instructions and stipulations in this

user’s manual, damage can occur and/or the

product will not fulfil the specifications. This may

mean that the guarantee will become null and void.

1.3 LIABILITY

Mastervolt can accept no liability for:

 consequential damage due to use of the Philippi

Interface;

 possible errors in the manuals and the results

thereof;

 Use that is inconsistent with the purpose of the

product.

CAUTION!

Never remove the identification label.

1.4 CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)

This product is designed and

manufactured with high quality

materials and components, which can

be recycled and reused. When this

crossed-out wheeled bin symbol is

attached to a product, it means the

product is covered by the European Directive

2012/19/EU.

Please be informed about the local separate

collection system for electrical and electronic

products.

Please act according to your local rules and do not

dispose of your old products with your normal

household waste. The correct disposal of your old

product will help prevent potential negative

consequences to the environment and human

health.

2 HOW IT WORKS

2.1 COMMUNICATION

This MasterBus-Philippi interface connects

Mastervolt products with MasterBus to a Philippi

network. MasterBus products can be monitored and

configured from a Philippi display system monitor.

Chapter 3 describes the installation of the interface.

Chapter 4 describes the possibilities once installed.

The Philippi interface does not require any

configuration in most cases. Chapter 5 shows how

to do a manual configuration.

This might be needed when you have more than 6

MasterBus products in your network and want to

select which MasterBus product is presented on the

Philippi network.

NOTE: this manual is not designed to replace either

the Philippi display manual or the manual of the

specific MasterBus product. Read these to

understand how the MasterBus products operate

and how the display works.

Figure 1: Screen of Philippi PSM2 display showing

information of Mass Combi Ultra

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastervolt MasterBus Philippi Interface Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info