Bedienungsanleitung Matrix H5x (Seite 4 von 24) (Englisch)

664296

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

for power. These cycles can be daisy-chained

together with up to 4 units per 15 A circuit. This

outlet should be a NEMA 6-20R and have the

same conguration as the plug. No adapter

should be used with this product. Matrix

daisy-chain cord adapters are sold separately.

GROUNDING INSTRUCTIONS

The unit must be grounded if connected to a

power supply source. If it should malfunction

or breakdown, grounding provides a path of

least resistance for electric current to reduce

the risk of electric shock. The unit is equipped

with a cord having an equipment-grounding

conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is

properly installed and grounded in accordance

with all local codes and ordinances. If the user

does not follow these grounding instructions,

the user could void the Matrix limited warranty.

ADDITIONAL ELECTRICAL INFO

In addition to the dedicated circuit requirement, the proper

gauge wire must be used from the circuit breaker box, to each

outlet that will have the maximum number of units running

off of it. If the distance from the circuit breaker box to each

outlet, is 100 ft (30.5 m) or less, then 12 gauge wire should be

used. For distances greater than 100 ft (30.5 m) from the circuit

breaker box to the outlet, a 10 gauge wire should be used.

ENERGY SAVING / LOW-POWER MODE

All units are congured with the ability to enter into an energy

saving / low-power mode when the unit has not been in use

for a specied period of time. Additional time may be required

to fully reactivate this unit once it has entered the low-power

mode. This energy saving feature may be enabled or disabled

from within the ‘Manager Mode’ or ‘Engineering Mode.’

ADD-ON PCTV (3X AND 5X)

A 15 A or 20 A “Dedicated Circuit” with a non-looped (isolated)

neutral/ground is required. Each PCTV requires at least 1.2 A of

current. No more than 12 PCTVs should be used for each 15 A

circuit and no more than 16 PCTVs should be used for each 20

A circuit. The power outlet should have the same conguration

as the plug. No adapter should be used with this product. An

DEDICATED CIRCUIT AND ELECTRICAL INFO

A “Dedicated Circuit” means that each outlet you plug into should

not have anything else running on that same circuit. The easiest

way to verify this is to locate the main circuit breaker box, and turn

off the breaker(s) one at a time. Once a breaker has been turned

off, the only thing that should not have power to it are the units

in question. No lamps, vending machines, fans, sound systems, or

any other item should lose power when you perform this test.

Non-looped (isolated) neutral/grounding means that each circuit

must have an individual neutral/ground connection coming from

it, and terminating at an approved earth ground. You cannot

“jumper” a single neutral/ground from one circuit to the next.

ELECTRICAL REQUIREMENTS

For your safety and to ensure good unit performance, the ground

on this circuit must be non-looped (isolated). Please refer to

NEC article 210-21 and 210-23. Any alterations to the standard

power cord provided could void all warranties of this product.

The 3x, 3xe, 5x, 7xe and 7xi cycles are designed to be self-powered

and do not require an external power supply source to operate.

Without an external power supply, the console’s start-up time

may be delayed. Add-on TV’s and other console accessories

will increase the time needed for start-up. An external power

supply will ensure power is provided to the console at all times

and is recommended when add-on accessories are used.

For units with an integrated TV (like the 3xe, 7xe and 7xi), the

TV power requirements are included in the unit. An RG6 quad

shield coaxial cable with ‘F Type’ compression ttings on each

end will need to be connected to the cardio unit and the video

source. Additional power requirements are not needed for

the add-on digital TV (3x and 5x). For units with an add-on

PCTV (3x and 5x), the TV power requirements are separate.

NOTE: All units with Virtual Active

™

must be powered.

110 V UNITS

All Matrix 110 V cycles require the use of a 100-125 V, 60 Hz and a 15

A “Dedicated Circuit”, with a non-looped (isolated) neutral/ground

for power. These cycles can be daisy-chained together with up to 4

units per 15 A circuit. This outlet should be a NEMA 5-15R and have

the same conguration as the plug. No adapter should be used with

this product. Matrix daisy-chain cord adapters are sold separately.

220 V UNITS

All Matrix 220 V cycles require the use of a 216-250 V, 50 Hz and a 15

A “Dedicated Circuit”, with a non-looped (isolated) neutral/ground

RG6 coaxial cable with ‘F Type’ compression

ttings will need to be connected between the

video source and each add-on PCTV unit.

ADD-ON DIGITAL TV (3X AND 5X)

Additional power requirements are not needed

for the add-on digital TV. An RG6 coaxial

cable with ‘F Type’ compression ttings will

need to be connected between the video

source and each add-on digital TV unit.

WARNING!

• Connect this exercise product to a

properly grounded outlet only.

• Never operate product with a damaged cord

or plug even if it is working properly. Never

operate any product if it appears damaged, or

has been immersed in water. Contact Customer

Tech Support for replacement or repair.

Failure to follow these specications

can cause damage to your product

and can void the warranty:

• All video and power outlets must be functional

the day of delivery / assembly of the product.

The client is responsible for any additional

installation charges associated with return visits.

• Electrical supply may uctuate in your

area. To ensure stable performance of the

product, use the proper gauge wire.

DANGER!

Improper connection of the equipment-

grounding conductor can result in a risk of

electric shock. Check with a qualied electrician

or serviceman if you are in doubt as to whether

the product is properly grounded. Do not

modify the plug provided with the product.

If it will not t the outlet, have a proper

outlet installed by a qualied electrician.

POWER REQUIREMENTS

North American

power cord plugs

shown. Depending

on your country, the

plug type may vary.

110 NEMA 5-15P

PLUG

220 NEMA 6-20P

PLUG

Matrix H5x Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Matrix H5x

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info