EN Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany • ✆ +49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
The hair catcher is replaceable. Additional spare sets
containing fragrance blocks and hair catchers can be
purchased at the following website: www.maxxworld.de
Replacing Fragrance Block
You can look through the viewing window (7) in the
cover (1) to check the extent to which the fragrance block
has dissolved and whether a new fragrance block needs to
be inserted.
1. Remove the article from the shower tray.
2. Grip the hair catcher (4) by the handle (5) and pull it off the
receptacle for the cover (3).
3. Pull the fragrance block holder (6) out of the receptacle for the
cover (3).
4. Insert a fragrance block with fi lm into the fragrance block
holder
(6)
. We recommend that you use protective gloves when
handling the fragrance block.
5. Place the fragrance block holder (6) into the receptacle for the
cover (3) and push it in as far as it will go.
6. Fix the fragrance block holder (6)
with the hair catcher (4) on the re-
ceptacle for the cover (3). When you
do this, make sure that the tongue of
the receptacle (A) sits in the groove
on the hair catcher (B) (see picture).
7. Adjust the fl ow rate of the water by twisting the fragrance block
holder (6).
8. Place the article on the drain and press it down fi rmly by the
suction pads (2).
Disposal
The packaging material is recyclable. Dispose of the
packaging and the set in an environmentally friendly man-
ner and take them to a recycling centre.
A
B
Z 00344 M DS V2 0117
