Bedienungsanleitung Mazda CX-9 - 2015 (Seite 3 von 18) (Englisch)

617533

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

3 4

To Program the Driver’s Seat Position and Outside Mirror Angle

1 Park the vehicle.

2 Adjust the seat to the desired position using the slide/tilt and

recline switches.

3 Adjust the outside mirror angles.

4 Push the memory seat SET button followed by one of the programming

buttons (1-3) until a beep is heard. Programming is now complete.

Program the remaining two buttons as desired.

To Program the Driver’s Seat Position and Outside Mirror Angle

with Advanced key/Retractable type key

1 Adjust the seat and outside mirror angle to the desired positions.

2 Switch the ignition off.

3 Push the SET button next to the programming buttons and then the

unlock button on the advanced key/retractable type key you want to

program within about 5 seconds. A beep sound is heard when the

operation is completed.

NOTE:

When the driver's door is unlocked using a programmed advanced key/

retractable type key, the seat and outside mirror angles will move to their programmed

positions if the driver's door is opened within about 40 seconds. A beep sound is

heard after the adjustment to the programmed positions is completed.

To Move the Seat and Outside Mirrors to a Programmed Position

1 Shift the selector lever to the P position.

2 Push the programming button (1-3) that you selected when

programming your seat position.

Seats

ELECTRONICALLY OPERATED SEAT WITH MEMORY

Slide/Tilt Switch

Seat can be moved back

and forth, raised, lowered,

or tilted with this control.

Lumbar Switch

Push forward or backward to increase or

decrease lumbar support.

Recline Switch

Push forward or backward

to adjust seatback angle.

Memory Seat Switch

1 Open liftgate.

2 Lower head restraints.

3 Pull each strap on the rear of

the seat while pushing the left

and right seat forward to lay at.

To Return to the Original Position

Pull the strap to return the seatback to the original position.

SPLIT FOLDING THIRD-ROW SEAT

To create a at luggage compartment

space, fold the seatbacks forward.

Third-row seat

access lever

Seatback folding

lever

Straps

NOTE: The third row seats are equipped with foldable head

restraints. To fold the head restraint, pull the strap on the back

of the head restraint and fold the head restraint downward. To

return the head restraint to its upright position, lift it upward.

Strap

SECOND ROW SEATBACK RECLINE

To recline the seatback, lean forward slightly while folding lever.

Then lean back to the desired position and release the lever.

FOLDING THE SECOND-ROW SEATS

1 Unfasten the lap portion of the center-rear seat belt.

2 Slide seat all the way back toward rear of vehicle.

3 Lower head restraints.

4 Pull the seatback folding lever and fold the seatback forward.

THIRD-ROW SEAT ACCESS

• Pull the third-row seat access lever on the

side of the second-row seatback to fold

and slide the seat forward to access

third-row seating.

• Return the second-row seatback to the

normal upright position by pulling up on

the seatback until it locks into place.

• Slide the second-row seat forward or back

for proper legroom using the lever under

the front of the seat.

www.MazdaUSA.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mazda CX-9 - 2015 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mazda CX-9 - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info