Bedienungsanleitung Megasat Satmaster Portable Exclusive (Seite 16 von 19) (Deutsch, Englisch)

551350

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

ENGLISH ENGLISH

Set values for European capitals Troubleshooting

There are a number of common issues that can aﬀect the signal reception quality or the operation of the Sat-

master Portable. The following sections address these issues and potentialsolutions.

Blown fuse, Low power, or wiring

If the antenna unit is installed but entirely non-responsive, there are three key factors to check as part of the

troubleshooting Process:

1. Blown fuse

With the system powered on, move the antenna reﬂector slowly by hand. If the reﬂector does not move freely,

a fuse is not the Problem. If the reﬂector does move freely, one of the two fuses mounted on the CPU Board

may have blown or been broken. The Satmaster Portable Technical Manual Provides detailed instructions for

authorized service personnel who may be required to replace a fuse. Contact your local Megasat dealer or

service center for assistance.

2. Low power

If the power cable to the antenna unit is more than 50ft (15 m), the power levels can decrease over the course

of the cable, resulting in a voltage or current level at the antenna unit that is too low to power the system Pro-

perly. The Satmaster Portable Technical Manual Provides detailed instructions for supplying adequate power to

the antenna unit. Contact your local Megasat dealer or service center for assistance.

3. Cable connection

Also, an incorrect cable connection may be the reason that the system is not functioning properly. Check all

cables and connections. Trained service personnel can assist you. Contact your Megasat dealer.

4. Satellite signal blocked

Satellite signals can be blocked or degraded by buildings, other vessels, or equipment on the vessel itself.

Simply moving the vessel or obstruction will clear the signal.

5. Satellite coverage issue

Satmaster Portable will Provide outstanding reception within the 18” (46 cm) antenna coverage area for your

satellite television service of choice. However, reception can be degraded as you apProach the fringe coverage

areas. Refer to your satellite television service manual to check the viable coverage area for a18” (46 cm) an-

tenna.

6. Radar interference

The energy levels radiated by radar units can overload the antenna’s front-end circuits. Check with your installer

to make certain that the Satmaster Portable antenna unit is in the optimal location with regard to your radar

unit.

7. Satellite Frequency Data changed

If some channels work while one or more other channels do not, or if the antenna is unable to ﬁnd the satellite,

the selected satellite’s frequency data may have changed. This frequency data can be updated via the mainte-

nance port. Contact your local Megasat dealer or service center for assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Megasat Satmaster Portable Exclusive Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info