Bedienungsanleitung Melitta LOOK Timer (Seite 7 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

712193

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

provider or by using water hardness measuring strips

available in the shops. For softer water the descaling

display can be adjusted to descale less often.

•HolddowntheCALCbutton and by brieﬂy

pressing the m-button  set the desired level of

water hardness. The hardness setting will then

show in the display

•Onceyouhavesetthedesiredlevelofwater

hardness, let go of the CALC button.

Your settings are now saved.

•Thesettingsanddisplayareshowninthetable.

Hardness

setting

I II III IV

°dH

<7°

7-14°

14-21°

>21°

Display 

2 3 4

Please note:

•Waterhardnesscannotbeprogrammedwhilebrewing.

•Thelastwaterhardnesslevelchosenremainseven

after removing the power cable.

4. Setting the hotplate

Keeping coee warm on the hotplate aects the taste

of your coee. To avoid this you should enjoy your

coee fresh, by drinking it as soon after brewing as

possible. Unnecessary warming also uses valuable

energy. The factory settings for the appliance are for

40 minutes of warming. After this the hotplate turns

o automatically. This time can be changed as needed:

•HolddowntheON/OFFbutton and by brieﬂy

pressing the m-button  set the desired time

(20, 40 or 60 minutes). The current warming

time will be shown in the display .

•Onceyouhavesetthedesiredwarmingtime

let go of the button. Your setting is now saved.

•Thelastsettingchosenremainsevenafterremoving

the power cable.

5. Making coffee

•Ensurethattheapplianceisconnectedto

the power source.

•Fillthewatertank.

•Removethedetachablewatertankbyholdingthe

recessed grip and pulling straight up .

•Removethewatertanklidandllwiththedesired

amount of fresh water from the tap. Using the water

level indicator on the tank you an choose the cor-

rect number of cups.

•Closethetankbyreplacingthelidandinsertthe

tank back in the appliance. Please ensure that you

replace the tank upright in the appliance. The guide

rails on the appliance (left of the tank) will help you

with this .

•Alternativelyusetheglassjugtopourthewaterinto

the tank in the appliance . The required amount

of water can be seen on the water level indicator on

the tank.

Small cup symbol = approx. 85 ml coee per cup,

large cup symbol = approx. 125 ml coee per cup.

•Closethelidonthewatertankandplacetheglass

pot with closed lid in the appliance.

•Opentheswivellter to the left.

•FoldaMelitta

ﬁlter bag 1x4

at the embossed seam

and place it in the ﬁlter holder . Press the ﬁlter bag

into the ﬁlter holder by hand, to ensure a good ﬁt.

•Putthegroundcoeeintothecoeelter.We

recommend using 6 g of coee per large cup at a

medium setting of the AromaSelector

.

•Alternatively,youcanvarythetasteofthecoee

according to your personal preference using the

same quantity of coee. For a milder coee, turn the

AromaSelector

 to the left (

). For a stronger

coee, turn it to the right (

•Turntheapplianceon. Brewing begins.

•Aftermakingyourcoeethehotplatewillkeepit

warm and will turn o automatically after the time

you have set (see point 4). This avoids unnecessary

use of electricity and saves energy. You can of course

turn the machine o manually at any time.

•Thedripstoppreventsyourcoeefromdripping

when you remove the pot from the appliance .

•Withthehelpofthedetachableinnerlteryoucan

dispose of the ﬁlter bag simply and easily .

6. Timer Feature

The appliance is equipped with a TIMER feature. This

starts the brewing process at a time you programme.

•Preparetheapplianceasdescribedinpoint5‘making

coee’, but without pressing the ON/OFF button.

•Tosetthedesiredstarttime,holddowntheTIMER

button . The ﬁrst time you programme it the

display will show 00:00.

•Setthedesiredstarttimebyrepeatedlypressing

the h and m buttons . This goes faster if you hold

down the button.

•AfterlettinggooftheTIMERbuttonthecurrent

time will show. The chosen start time is saved until

you set a dierent time or remove the appliance

from the power source.

•BybrieypressingtheTIMERbutton the timer

feature is activated for the next brewing process.

To show this the TIMER button  is illuminated

and the programmed start time shows brieﬂy in the

display .

•Theapplianceautomaticallystartstomakecoeeat

the time you have set.

•Aslongasyoudonotremovetheplugfromthe

socket or set a new start time, the previous start

time is saved.

•BybrieypressingtheTIMERbutton you can

deactivate the timer feature at any time. The light in

the TIMER button  goes o.

•Ifyouwanttomakecoeebeforethestarttimeyou

have programmed, press the ON/OFF button .

The TIMER feature will be deactivated.

7. Cleaning and maintenance

External cleaning

•Switchothemachinebeforecleaninganddisconnect

the power cable.

•Allowtheappliancetocoolcompletelybefore

cleaning it.

•Cleanthepartsthatcomeintocontactwithcoee

(jug, ﬁlter holder, etc.) after each use.

•Thehousingcanbecleanedwithasoftdampcloth.

•Theglasspotandlid,thelterinsertandthe

G B

Melitta LOOK Timer Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info