Bedienungsanleitung Mercedes SLC 2018 (Seite 296 von 298) (Englisch)

703625

296

Zoom out

Zoom in

Vorherige Seite

1/298

Nächste Seite

The antifreeze/corrosion inhibitor concentra-

tion in the engine cooling system should:

be at least 50%. This will protectthe engine

cooling system against freezingdown to

approximately -35 ‡(-37 †).

not exceed 55% (antifreezeprotection down

to -49 ‡[-45 †]). Otherwise, heat will not be

dissipated as effectively

If the vehicle has lost coolant, add equal

amounts of water and antifreeze/corrosion

inhibitor.

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor concentrate in accordance

with MB Specifications for ServiceProducts

310.1.

When the vehicle is first delivered, it is filled

with acoolant mixture that ensures adequate

antifreeze and anti-corrosion protection.

The coolant is checked with every mainte-

nanceinterval at aqualified specialist work-

shop.

Fillingcapacities

Missing values were not availableattime of

going to print.

Model Capacity

SLC 300

Approx.8.5 US qt

(8.0 l)

Mercedes‑Benz

SLC 43 AMG

Approx.8.2 US qt

(7.8 l)

Windshield washer system

Important safety notes

WARNING

Windshield washer concentrate could ignite if

it comes into contact with hot engine compo-

nentsorthe exhaust system. There is arisk of

fire and injury.

Make sure that no windshield washer con-

centrate is spilled next to the filler neck.

Only use washer fluid that is suitable for

plastic lamp lenses, e.g. MB SummerFit or MB

WinterFit. Unsuitable washer fluid could dam-

age the plastic lenses of the headlamps.

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

spray nozzles may otherwise become

blocked.

Do not use distilled or de-ionised water. Other-

wise, the level sensor may give afalse reading.

When handling washer fluid, observe the impor-

tant safety notes on service products

(

Y page 290).

At temperatures above freezing:

Fill the washer fluid reservoir with amixture of

water and windshield washer fluid, e.g. MB

SummerFit.

Add 1part MB SummerFit to 100 parts water.

At temperatures below freezing:

Fill the washer fluid reservoir with amixture of

water and washer fluid, e.g. MB WinterFit.

For the correctmixing ratio refer to the infor-

mation on the antifreeze reservoir.

Add windshield washer fluid, e.g. MB Sum-

merFit or MB WinterFit, to the washer fluid all

year round.

Climate control system refrigerant

Important safety notes

The climate control system of your vehicle is fil-

led with refrigerant R‑134a.

The instruction label regarding the refrigerant

type used can be found on the radiator cross

member.

Only the refrigerant R‑134a and the PAG oil

approved by Mercedes-Benz may be used.

The approved PAG oil may not be mixed with

any other PAG oil that is not approved for

R-134a refrigerant.Otherwise, the climate

control system may be damaged.

Servicework, such as refilling with refrigerant or

replacing component parts, may only be carried

out by aqualified specialist workshop. All appli-

cable regulations, as well as SAE standard J639,

must be adhered to.

Always have work on the climate control system

carried out at aqualified specialist workshop.

294

Service products and filling capacities

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes SLC 2018 Seite 296

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes SLC 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info