600779
9
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
12. Technical Specifications
ENGLISH en
9
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
dia. max.=Maximum cu
tting thickness
L =Useful blade length
n
0
=Number of cuts at idling speed
P
1
=Nominal power input
m =Weight without mains cable
Vibration total value (vector sum of three directions)
determ
ined in accordance with EN 60745:
a
h
=Vibration emission value (idle speed)
K
h
=Uncertainty (vibration)
The vibration emission level given in this
in
formation sheet has been measured in
accordance with a standardised test given in EN
60745 and may be used to compare one tool with
another. It may be used for a preliminary
assessment of exposure.
The declared vibration emi
ssion level represents
the main applications of the tool. However if the tool
is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of
exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety
measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
ha
nds warm, organisation of work patterns.
Typical A-effective perceived sound levels:
LpA =Sound pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
= Uncertainty
L
WA(G)
=Guaranteed acoustic power level as per
2000/14/EC
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~ Alternating current
The technical specifications quote
d are subject to
tolerances (in compliance with the relevant valid
standards).
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metabo HHS 55 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info