Bedienungsanleitung Metabo HS 8765 (Seite 8 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600786

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISHen

be switched off and the plug removed from the

socket before the cause of the blockage can be

removed manually from the cutting blade.

For other activities (e.g. removing twigs or cuttings),

deposit the machine outside the working area.

Lay the machine down such that persons are not at

risk.

When you have laid the hedge trimmer down, pull

the plug from the socket.

For storage and transportation, always slide the

enclosure onto the cutting blades. (It has been slid

on correctly if the Metabo lettering faces upwards).

Only carry the machine by the bow-type handle.

See page 2.

1 Switch (safety two-hand operation)

2 Switch (safety two-hand operation)

3 Switch (safety two-hand operation)

4 Bow-type handle

5Hand protection

6Enclosure

7 Cutting blades

8 Impact protection with twig feed

9 Cable strain relief device

Before plugging in, check to see that the

rated mains voltage and mains frequency,

as stated on the rating label, match with your

power supply.

To prevent the hedge trimmer plug from

inadvertently being pulled out of the coupling socket

of the extension cable, attached the extension

cable to the cable strain relief device as shown (9)

(Figure on page 2).

Note: the cable tension device is designed to hold

approved extension cables (H07 RN-F 3G1,5 /

3G1,0) that are used most frequently for external

applications.

For other approved extension cables that are also

used outside, we recommend using the cable

tension strap, order no. 6.31070.

Check Quick stop:

Switch machine on briefly and then off again. Have

the machine repaired if braking time is clearly

lengthened.

7.1 Switching On and Off

Switching on (safety two-hand operation):

• For normal applications: Press switch (2) and

switch (3).

• For a wider range: Press switch (1) and

switch (2).

To switch off:

Release one of the two actuated switches.

Thanks to the patented Quick stop, the cutting

blades come to a standstill within 0.05 seconds.

Have the machine repaired if braking time is

clearly lengthened.

The noise that sometimes occurs during a machine

Quick stop is design-related and has no influence

on operation and service life.

7.2 Cleaning the cutting blade

(after every use)

Before cleaning:

Switch the machine off.

Pull the mains plug out of the socket.

Wear protective gloves.

Remove contamination, remains of blades etc. (e.g.

with a brush or cloth)

After cleaning: Treat cutting blade with Metabo

hedge trimmer care oil 6.30474 or Pump Spray

6.30475 (biologically degradable).

It is advisable to have blunt cutting blades

sharpened in a specialist workshop. Check cutting

blades regularly for damage and have them

repaired in a specialist workshop immediately if

necessary.

Use only genuine Metabo accessories.

For a complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

Contact your local Metabo representative if you

have Metabo power tools requiring repairs. For

addresses see www.metabo.com.

You can download a list of spare parts from

www.metabo.com.

When replacing the carbon brushes, for safety

reasons the safety device (spare parts list,

Pos. 26) must also be replaced.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline

2002/96/EC on used electronic and electric

equipment and its implementation in national

legal systems, used power tools must be collected

separately and handed in for environmentally

compatible recycling.

5. Overview

6. Commissioning

7. Use

8. Maintenance

9. Accessories

10. Repairs

11. Environmental Protection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo HS 8765 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info