Bedienungsanleitung Metronic ZAP 4 - 495325 (Seite 3 von 24) (Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

780672

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

FOREWORD

Thank you for choosing a universal METRONIC remote. We are condent you will be fully sa-

tised with this product. Models ZAP 2 to 6 enable to manage 2 to 6 appliances: TV, Satellite

receiver (SAT), DVD recorder (DVD) or HIFI system (AUX), DVB-T set top box (TNT), ADSL box

(BOX) according to models. After inserting the 1.5V AAA batteries (not included) in the remote,

you can set up the remote for each appliance that you wish to control. The universal METRONIC

remote has been conceived to control most products of each brand. This is why you have the

choice between 2 types of set ups : by Brand code or by automatic search. In the set up details

below, we use a TV as example. In order to set up the remote for your Satellite receiver or DVD

recorder, replace ‘TV’ with ‘SAT’ or ‘DVD’. After you have set up the remote, simply press the TV,

DVD, SAT etc key to select the appliance you wish to control.

A - Set up by brand code

1 - Switch on your TV.

2 - Look up in the following pages the codes that correspond to the brand of your TV (i.e. for AEG,

you should try the code 0589, then 1423 if the rst code does not work, and nally 0043 if none

of the two rst codes work).

3 - Press the PROG and TV keys together for a few seconds until the light switches on. If you wait

too long before pressing another key, the remote will go into standby and the light will switch

o. You should then start at Step 3.

4 - Enter one of the 4-digit Brand codes. After each digit, the light will briey switch o. It will

switch o for good after you have entered the 4th digit. If the light blinks twice and then stays

on, try the next code.

5 - Point the remote towards your TV and try using the main features (changing channels, ad-

justing sound…)

6 - If the remote does not control the TV properly, try the set up again (from 3) with the next

Brand code. If the remote controls the TV correctly, then the set up is over. If the remote does

not work properly with any code, you should try an automatic search.

B - Automatic Search

1 - Switch on your TV. The automatic search might take a little while (up to 15 minutes).

2 - Press the

PROG

and TV keys together for a few seconds until the light switches on. When you

release the keys the light should stay on.

3 - Press the

PROG

key. The light should start blinking. Press the key until the light switches o

and slowly starts blinking again. This means the automatic search has started. The light should

stay on and blink every time a new code is entered. You should be ready to press the 0 key.

4 - As soon as the TV switches o, press the 0 key. The light should start blinking. Press the TV key.

The light should switch o. Note: You should be quick enough not to exceed 1 second before

the next code from your remote control (a bit less than 1 second between turning TV o and

time to press key «0»).

5 - As your TV is now switched o, switch it on again using the original remote or with the front

keys.

6 - Point the remote towards your TV and try using the main features (changing channels, adjus-

ting sound…). If the remote does not control the TV properly, try the automatic set up again

(from 2). If the remote controls the TV correctly, then the set up is over.

Changing batteries

When the remote starts struggling to control the appliances or if it does not work properly,

you should try changing batteries. Thanks to its memory function, you can change batteries

withouht losing your settings on the remote.

GB | 4 in 1 UNIVERSAL REMOTE CONTROL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metronic ZAP 4 - 495325 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info