Bedienungsanleitung Mia DB8465 (Seite 13 von 16) (Deutsch, Englisch, Französisch)

715831

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Prodomus

and flashes, while the appliance is standing vertically on the working place, it will switch into

a “Standby-mode” automatically then (see fig. 4) „Standby“ is a safety function to avoid burn and

damage of the textiles if the iron will be left parked in vertical position and will not be moved any

more for a longer time. The iron indicates this with an acoustic signal and the word „Standby“

will appear on the display. As soon as the iron will be moved again, it will change into the preset

adjustment. The red control lamp is switched off and the blue control lamp is illuminated.

Then preset adjustment is indicated in the display again. If the iron is positioned upright for a

longer time, it will change into „Standby“ mode after approx. 20-30 minutes. The red control lamp

will flash permanently then.

Temperature adjustment and indication

Always check first to see whether a label with ironing instruction is attached to the article to

be ironed.

 Synthetic fibres, Acryl, Viscose, Polyamide, Polyester (low temperature, see fig.1)

 silk, wool (medium temperature)

 cotton, linen (high temperature, see fig. 3)

MAX highest temperature setting for thick cotton or linen fabrics

The appliance provides a 4-level temperature adjustment with blue illuminated LED indication on

top of the handle. The desired temperature can be adjusted by pressing the temperature control

(see fig. 1). The levels from 1-4 (= MAX) are indicated as soon as the temperature control will be

pressed. Press 1 x = low level , press 2 x =  next higher level etc. Each time you press the

temperature control an acoustic signal will sound.

The selected operation mode is indicated by various symbols in the display (see the pictures

1-4 in the following instruction also).

While heating up a thermometer picture will appear on the right side next to the temperature

indication (see Fig. 2 and 3). It indicates that the appliance is heating up until the appliance

has reached the adjusted temperature. Then it will switch off.

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Ironing without steam

Before starting ironing always check first whether a label with iron symbol is attached in the

reverse side of the cloth. See the table provided in these instructions for choosing the right

ironing level. Follow these ironing instructions in all cases. Start ironing by using textiles which

need low iron temperature like synthetics, silk. Ensure that steam control is in position “0” (Fig.

1, “Steam off”). Tip: Sensitive fabrics tend to get glossy stripes or water spots while using steam.

When steam-ironing woollen fabrics, shining of the fabric may occur. This can be prevented by

turning the article inside out and ironing the reverse side. Iron all sensitive fabrics by turning them

to the reverse side first. To avoid risks completely do not use steam while ironing sensitive

fabrics.

Spray button

Burst of steam

button

Self cleaning button

Steam control

Temperature control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mia DB8465 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info