Bedienungsanleitung Mia KF 1735T (Seite 12 von 14) (Deutsch, Englisch, Französisch)

714874

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Prodomus

Before the first use

Caution: Never use the appliance near hot surfaces and keep the cord away from heat

resources to avoid damage.

Place the appliance on a dry, stable and flat working place next to a power socket.

Run the cable in a way that nobody can pull on it or stumble over it.

See the description on page 2 first to get familiar with the appliance.

Before making coffee for the first time it is advisable to let the water run through 2 - 3 times without

using coffee. Then clean filter and jug. The special smell from new appliances and production

residues will be removed then.

Preparing coffee

Preparation: Before switching on the appliance, open the lid and pour the desired volume

of water into the water tank. Always take fresh, cold water never take hot water to fill the tank.

The amount of cups can be read on water level indicator at the water tank.

 Only fill water up to the MAX marking, not more.

 Place the thermo jug under the filter arrangement with fully and firmly closed lid. Push the

small lever at the lid of the thermo jug slightly downward. This allows to put the thermo jug

under the filter holder easily. For maximum heat retention, rinse the thermo jug with hot

water. The thermo jug has a drip-through-lid. Close the lid firmly, the handle of the thermo

jug and the lever of the lid must be parallel. Always place the thermo jug on the appliance

under the filter unit before you switch on the appliance!

 Open the filter unit. Insert the permanent filter (or paper filter 1 x4 is also possible) and fill

in the desired quantity of ground coffee. Close the lid.

 Connect to power source, 12:00 will show on display.

 Press ON/OFF button once, the green indicator is illuminated. Press ON/AUTO /OFF

button again, the red indicator is illuminated and coffee brewing will start. After some

seconds, hot coffee will drop out automatically.

If you press the ON/OFF button again (third time), the red indicator goes out and the coffee

maker stops working.

 After brewing is finished and hot coffee has stopped dripping, you can empty the jugs and

clean them.

 CAUTION! Never operate the appliance without the provided thermo jug!

 The appliance automatically switches off after ending the brewing process!

To interrupt the brewing process, it is also possible to switch manually into “0FF” position.

After brewing is finished:

 Remove the thermo jug. Push slightly down the lever at the lid of the thermo jar, this

makes removing easier.

For pouring coffee, slightly push the lever (button) at the lid of the thermo jug.

Keeping warm: The rest of the coffee keeps warm in the double-wall thermo jug for a long

time if the lid is closed. The warming plate of the appliance gets warmed passively during the

brewing process. Rest heat of the warming plate will warm the bottom of the thermo jug

for a while. The warming plate will not re-heat.

Note

 Fill cold water only into the water compartment. Do not pour milk or ready-made beverages

into the water compartment to avoid staining and damage.

 Switch off the appliance and let it cool down for minimum 5 minutes before reusing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mia KF 1735T Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info