Bedienungsanleitung Microlife NC200 (Seite 4 von 67) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

678026

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite



WARNING: The measurement results given by this device

is not a diagnosis. It is not replacing the need for the consul-

tation of a physician, especially if not matching the patient’s

symptoms. Do not rely on the measurement result only,

always consider other potentially occurring symptoms and

the patient’s feedback. Calling a doctor or an ambulance is

advised if needed.

3. How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from the

forehead as well as objects. This energy is collected through the

lens and converted to a temperature value.

4. Control Displays and Symbols

• All segments displayed 9: Press the START/IO button 7 to

turn on the unit; all segments will be shown for 1 second.

•

Ready for measuring

When the unit is ready for measuring,

the «

°C

» or «

°F

» icon will keep flashing while the mode icon

(body or object) will be displayed.

• Measuring countdown BR: A 3 second countdown will be

shown on the display (3, 2, 1), before each measurement.

• Measurement complete AK: The reading will be shown on the

display 4 with the «°C» or «°F» icon and the mode icon

steady. The unit is ready for the next measurement as soon as

the «°C» or «°F» icon is flashing again.

•

Low battery indicator

When the unit is turned on, the

«battery» icon will keep flashing to remind the user to replace the

batteries.

5. Setting Date, Time and Beeper Functions

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display BO. You can set the year by pressing the M-button 5.

To confirm and then set the month, press the MODE button 6.

2. Press the M-button 5 to set the month. Press the MODE

button 6 to confirm and then set the day.

3. Follow the previously mentioned instructions to set the day,

hours and minutes.

4. Once you have set the minutes and pressed the START/IO

button 7, the date and time are set and the time is displayed.



If no button is pressed for 20 seconds, the device automat-

ically switches to ready for measuring AT.



Cancel time setup: Press the START/IO button 7 during

time setup. The LCD will show Date/Time icons with «--:--».

After that press the START/IO button 7 to start the

measurement. If no further action is taken within 30

seconds, the device will automatically turn off.



Change current date and time: Press and hold the MODE

button 6 for approx. 8 seconds until the year number

starts to flash BO. Now you can enter the new values as

described above.

Setting the beeper

1. Press and hold the MODE button 6 for 3 seconds to set the

beeper BP.

2. Press the M-button 5 to either turn the beeper on or off. The

beeper is activated when the beeper icon BP is shown without

a cross.



When the beeper setting has been chosen, press the

START/IO button 7 to enter the «ready for measuring»

mode; otherwise the device automatically switches to ready

for measuring after 10 seconds AT.

6. Changing between Body and Object Mode

1. Press the START/IO button 7. The display 4 is activated to

show all segments for 1 second.

2. The default mode is body mode. Press the MODE button 6 to

switch to object mode. For switching back to body mode, press

the MODE button again.

7. Directions for Use

Always remove the protective cap BS before use.

Measuring in body mode with auto measurement and

distance control

1. Press the START/IO button 7. The display 4 is activated to

show all segments for 1 second.

2. A flashing «

°C

»/«

°F

» icon, the blinking blue tracking light

and

a beep indicate that the device is ready for measurement

3. Remove any hair, sweat or dirt from the forehead before

measuring to ensure the accuracy of the readings.

4. Aim the thermometer at the center of the forehead with a

distance of no more than 5 cm.

5. The device will start the measurement automatically, when

the measuring sensor 1 detects the distance is appro-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife NC200 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info