Bedienungsanleitung Midas PRO Series Live (Seite 662 von 666) (Englisch)

658468

662

Zoom out

Zoom in

Vorherige Seite

1/666

Nächste Seite

622

PRO Series Live Audio Systems

Owner’s Manual

Pschycoacoustic noise: Noise that affects the

physiology of the listener.

Quick access button: Button for navigation/

selection of a channel/bus/processing area.

RAM: Abbreviation for “Random access

memory”.

Return: Auxiliary return or aux return. An

extra input used for receiving a signal from the

output of an internal or external effect

processor. See Bus.

Reverb: An effect where the ambience of a

physical space is simulated. This is done by

copying a signal and replaying at regular

intervals at ever decreasing levels. The

intervals are so close that each copy is not

heard individually.

RMS: Abbreviation for “root-mean-square”. The

square root of the mean of the sum of the

squares. Commonly used as the effective value

of measuring a sine wave's electrical power. A

standard in amplifier measurements. The

effective average value of an AC waveform.

RS: Abbreviation for “right surround”. The

right-hand rear speaker in a 5.1 surround

system.

s: Symbol for “second”. A unit of time.

Scene: In automation, a set of mix settings for

a particular part of a performance, for example,

a play or song.

Sibilance: Energy from a voice, centred around

7kHz, and caused by pronouncing "s", "sh" or

"ch" sounds.

Side chain: A special circuit that diverts a

proportion of the main signal so that it can be

processed, as required. Compressors use the

side chain to derive their control signals.

Signal flow: The path of a signal from one

place to another.

SIP™: Abbreviation for “solo in place”.

SIS: Abbreviation for “spatial imaging system”.

Combines a central loudspeaker cluster with a

left-right system to form three discrete sound

channels.

Snapshot: A captured group of mixer settings

that reflect the state of the mixer at a particular

moment within a performance. This snapshot

can then be recalled at the required moment in

the performance/playback.

Solo: During monitoring, the isolation of one

signal by silencing all other signals.

Source: The patch connector from which a

signal is patched. See Patching.

SPL: Abbreviation for “sound pressure level”.

Given in decibels (dB), SPL is an expression of

loudness or volume.

Splash screens: The GUI display during power

up.

SRC: Abbreviation for “sample rate converter”.

SSD: Abbreviation for “solid-state disk”. Data

storage device that uses non-volatile memory to

store data. Quicker than the conventional hard

disk and less susceptible to the failures

associated with hard disk drives.

Status indicator: A device specifically designed

to show the condition of something. For

example, an LED that shows whether a

pushbutton is on or off, or a meter showing the

level of a signal.

Stereo: Two separate channels, left and right,

used to give the listener the perception of where

the noise is coming from. Usually used with

music to give a fuller, more natural sound.

Stereo image: The perception of the different

sound sources coming from far left, far right or

anywhere in between.

Surround: Audio that has more that two

speaker locations and, therefore, more than two

channels. Also commonly termed “surround

sound”.

Synchronisation (sync): Coordination of

timing between devices.

Tab: A ‘sheet’ in the From and To sections that

contains a specific group of patch connectors.

See Patching.

TFT: Abbreviation for “thin film transistor”.

Threshold: Level at which dynamics processing

will begin to operate.

Tie line: A dedicated connection between two

systems, typically between FOH and MON

positions.

To section: The rightmost area of the Patching

screen that contains the destination patch

connectors. See Patching.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas PRO Series Live Seite 662

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info