Bedienungsanleitung Midas XL48 (Seite 26 von 32) (Englisch)

658472

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

XL48 Microphone Pre-amplier

10. Service Information

Figure 5: Mains fuse compartment on rear panel.

(1) Mains fuse

(2) Spare fuse

(3) Fuse holder

(4) Mains IEC socket

(5) Fuse compartment

This section gives you servicing information for your unit.

If you are in any doubt or have queries about any of the procedures in this section,

contact Midas Technical Support. Contact details can be found at the front of

thismanual.

10.1 Routine maintenance

To help keep your unit in good working order and to make sure it gives you

optimum performance, we recommend that you carry out the following

everymonth.

• Clean the unit (see "Cleaning the unit" below).

• Check all controls, such as pushbuttons and control knobs, for freedom

ofoperation.

• Check the functionality of all controls and indicators, such as LEDs.

• Check the functionality of the equipment.

10.2 Cleaning the unit

◊ Switch off the unit and electrically isolate it from the mains

before cleaning.

Clean the unit using a dry, lint-free cloth. Don’t use harsh abrasives or solvents.

10.3 Replacing the mains fuse

◊ Switch off the power to the unit and electrically isolate it from the

mains before replacing the mains fuse.

To replace the mains fuse, carry out the following (see Figure5):

• Switch o the power to the XL48 unit at the mains power outlet.

• Remove the mains IEC connector from the rear of the unit.

• Pull out the fuse drawer and remove the faulty fuse.

• Fit a new fuse, ensuring it conforms to the correct rating and specication.

• Fit the fuse drawer back into its compartment.

10.4 Equipment disposal

When this equipment has come to the end of its useful life, its disposal may

come under the DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT

AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic

equipment(WEEE).

Hazardous substances in WEEE contaminate water, soil and air and ultimately put

at risk our environment and health. The directive aims to minimize the impacts of

WEEE on the environment during their life times and when they become waste.

The WEEE directive addresses the disposal of products when they have reached

the end of their life and contributes to the reduction of wasteful consumption of

natural resources. This will help to reduce pollution, and protect the environment

and ourselves.

If this equipment carries a ‘crossed-out wheelie bin’

(shown left), please do not dispose of WEEE as unsorted

municipal waste but collect and dispose of in accordance

with local WEEE legislation. The horizontal bar underneath

indicates that the product was placed on the EU market

after 13th August 2005.

For WEEE disposal, see our website at midasconsoles.com

for information.

midasconsoles.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas XL48 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info