Bedienungsanleitung Midea MSX-09HRDN1 (Seite 7 von 16) (Englisch)

588790

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Special function

Air quality is the key to comfort, this air

conditioner is equipped with Ionizer or

Plasma Dust Collector(Depending on models).

Ionizer can generate abundant anions to fill

the room with refreshing and nature air. Your

whole family will enjoy a natural, pure and

healthy air everyday. The Plasma Dust Collector

can generate an ionization zone. The air is

converted to plasma as it passes the high

voltage ion generator. 95% of the dust, smoke,

and pollen particles are attracted to the

electrostatic filter.

CLEAN AIR function

Function used after the Shut Down of

cooling operation to clean the Evaporator

and keep it as fresh for the next operation.

This function is easy to be operated as it is

accessed through the Remote Controller.

For cooling only models, the unit will

operate under FAN ONLY mode at LOW

fan speed for 30 minutes, and then stop

the operation and the unit turn off.

For cooling & heating models, the unit will

operate : FAN ONLY mode at Low fan

speed(13 minutes)--Heating operation

with LOW fan speed(1 minute)---FAN

ONLY operation(2 minutes)--

Stop Operation---Turn off the unit.

Note:

This function is only available under

COOL(AUTO COOL, FORCED COOL)

and DRY mode.

Before select the function, it is recomm-

ended to run the air conditioner under

Cooling operation for about half an hour.

Once the Self Clean function is activated,

all TIMER setting will be cancelled.

During Self Clean operation, when press

the SELF CLEAN button on the remote

controller again will stop the operation

and turn off the unit.

SELF CLEAN function

Follow Me function

To activate the Follow Me feature, point the

remote control towards the unit and press the

Follow Me button. T

If the unit does not receive the

Follow Me signal during any 7 minute interval,

the unit will beep to indicate the Follow Me

mode has ended.

he remote display is actual

temperature at its location. The remote control

will send this signal to the air conditioner every

3 minutes interval until press the Follow Me

button again.

The remote control serves as a remote

thermostat allowing for the precise

temperature control at its location.

OPERATING INSTRUCTIONS

TIMER display

Displayed during Timer operation.

CLEAN AIR display(optional)

Displayed when Ionizer or Plasma dust

collector(depending on models) is activated.

TURBO operation display

Displayed when select TURBO function

on cooling operation or on heating

operation.

DIGITAL DISPLAY

Displays the current setting temper-

ature when the air conditioner is in

operation. When SELF CLEAN

feature is activated, it displays .

FAN SPEED display

Displayed the selected fan speed:

AUTO(nothing) and three fan speed

levels: LOW( ), MED( ) and

HIGH( ).

This display is separated into five

zones. The zones illuminate based on

the compressor current frequency. For

example, higher frequency will

illuminate more zones.

Operation Frequency display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midea MSX-09HRDN1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midea MSX-09HRDN1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info