Bedienungsanleitung Midea R71A Remote control (Seite 5 von 5) (Englisch)

588145

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Names and Functions of indicators on Remote Controller

TRANSMISSION Indicator:

This indicator lights when remote

controller transmits signals to indoor unit.

MODE indicator:

Displays the current operation modes.

Including AUTO( ), COOL( ), DRY( ) ,

HEAT( ) or FAN( ).

HEAT only available for heat pump model.

TEMPERATURE indicator:

SWING indicator:

This indicator lights up when the SWING

button is pressed.

FAN SPEED indicator:

Displays the selected fan speed, AUTO( ) and

three fan speed levels LOW( ), MED( ),

HIGH( ). Displays (flashing) when the

operating mode is either AUTO or DRY.

TIMER indicator:

The time set for timer operation is indicated.

(0.5 ~ 24 hours)

NOTE: All items are shown in the Fig.2 for the purpose of clear

presentation But during the actual operation only the

relative functional items are shown on the display panel.

Display Panel

Fig. 2

Operating the Remote Controller

When the Air Conditioner is ready for use, switch on the power

and the OPERATION indicator lamp on the display panel of the

indoor unit starts flashing.

1. Use the Mode select button to select AUTO.

2. Push the or button to set the desired room temperature.

The most comfortable temperature settings are between 21 C

to 28 C.

3. Push the On/off button to start the air conditioner. The OPE-

RATION lamp on the display panel of the indoor unit lights. The

operating mode is AUTO. The FAN SPEED is automatically

controlled.

4. Push the On/off button again to stop the unit operation.

1. When replacing batteries, do not use old batteries or a different

type battery. This may cause the remote controller to

malfunction.

2. If you do not use the remote controller for several weeks

remove the batteries. Otherwise battery leakage may damage

the remote controller.

3. The average battery life under normal use is about 6 months.

4. Replace the batteries when there is no answering beep from the

indoor unit or if the Transmission Indicator light fails to appear.

1. In the AUTO mode, the air conditioner can logically choose

the mode of COOL, FAN, HEAT and DRY by sensing the dif-

ference between the actual ambient room temperature and

the set temperature on the remote controller.

2. If the AUTO mode is not comfortable for you , the desired mode

can be selected manually.

Install / Replace Batteries

AUTOMATIC OPERATION

NOTE

Hr.

ON TIMER

Hr.

Off TIMER

SET TEMP

Auto

Displays the temperature settings(17 to 30 ).

SLEEP/TURBO indicator:

Each time the Sleep/Turbo button is pushed, the

signal displays in the following sequence:

Auto

Use two alkaline dry batteries (R03/LR03X2).

Do not use rechargeable batteries.

(1) Remove the battery cover by pulling it according to the

arrow direction.

(2) Insert new batteries making sure that the

(+) and (-) of battery are installed correctly.

(3) Reattach the cover by sliding it back into position.

Turbo

Nothing Nothing

Nothing appears when the operating mode is either

DRY or FAN only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midea R71A Remote control Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midea R71A Remote control

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info