Bedienungsanleitung Midland BTX2 (Seite 9 von 33) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

494049

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Midland BTX2 - 15

14 - Midland BTX2

MIDLAND BTX2

Advanced Intercom System

BTX2 is an intercom communication system solution for motor cyclists.The design is very slim and aerodynamic, all the main functions are easy to operate thanks to the big three

buttons placed on the front of the unit.

BTX2 is xed on the helmet using the adhesive plate or the screw mounting clamp. Thanks to the audio kit with ultra slim speakers you can enjoy high quality stereo music while

riding.

Main features

› Intercom driver - passanger or bike to bike (800mt).

› Connect up to three people for intercom communication (using Talk2All-

Universal Intercom)

› Connect your phone to receive and place phone call and listen to stereo music

› Connect your GPS for voice street indication

› Connection for PMR466 radio with internal or external Bluetooth

› AUX wired connection for MP3 player and PMR446 radio

› Setup and Firmware update via USB connection to a PC

Midland BTX2 is available in two versions:

› Single BTX2 Intercom kit with one unit only

› Twin BTX2 Intercom kit with with two units

Depending on the model purchased, the package contains the following

parts:

BTX2 single

› 1 BTX2 communication unit

› 1 audio kit with two stereo speakers, microphone with boom and wired mi-

crophone

› 1 plate with bi-adhesive strip to x the unit onto the helmet

› 1 clamp to x the unit onto the helmet

› 1 stereo audio cable for iPod/ or other MP3 players

› 1 miniUSB wall-mounting power supply

BTX2 Twin

› 2 BTX2 communication units

› 2 audio kits with two stereo speakers, microphone with boom and wired mi-

crophone

› 2 plates with bi-adhesive strip to x the unit onto the helmet

› 2 clamps to x the unit onto the helmet

› 2 stereo audio cables for iPod/ or other MP3 players

› 1 miniUSB wall-mounting power supply with double plug

The units included in the TWIN kit are already paired and can therefore be immedia-

tely used in Intercom mode.

Technical speciﬁcations of Midland BTX2

General:

› Bluetooth ver. 3.0 stereo (Headset/Handsfree/A2DP protocol)

› AGC system automatically controls the volume in relation to background noise

› Voice (VOX) or manual communications activation

› Manual controls to enable: telephone, intercom and wire connection

› Fully waterproof

› Lithium battery with 10 hours talk time

› Recharge time: app. 6 hours

Bluetooth connections:

With identical device for Driver to Passanger or Bike to Bike Intercom

Bluetooth devices:

› Mobile phone with MP3 player Stereo (A2DP protocol), GPS (Garmin Zumo and

TomTom Rider 1 and 2)

› PMR446 transceivers (with built-in or external Bluetooth connection) for

group bike-to-bike communications

Wire connections:

› For stereo audio input like iPod/MP3 player (with optional cable)

› For PMR446 transceivers (with optional cable)

Attention: Midland BTX2 is designed to withstand rain and water. However, if it is

raining, always verify that the rubber caps protecting the sockets are fully tted.

Charging batteries

Attention: Make sure that the unit is fully charged before use. Allow at least 8 hours

for a full charge before using the unit for the rst time.

Charge the unit by inserting the wall-charger into the charging socket (lift the

rubber cover to insert the plug).

The red LED on the unit will start ashing when charging begins.

Allow the headset to charge until the unit stops ashing or the blue LED turns on.

When the charge is complete (the red LED is not ashing), release the headset

from the charger.

Normally, after the rst time, it takes 6 hours for a full charge.

Attention: every time the mini USB recharging plug is inserted (or detached), the

device is automatically turned o. To use it while it is in charge, you should turn the

device on with the plug already inserted.

Unit and ﬁxing system description

BTX2 description

The BTX2 has ve buttons on the front; the main three big button are multi fun-

ctions buttons: the Forward (on the left), the middle button and the Rear (on the

right), the two small rounded buttons are the Volume + and Volume -.

Description of the wired connections

On the bottom of the unit you can nd three wired connection:

Charger jack: enables to recharge the unit using a standard miniUSB power

supply

Audio kit jack: enable to connect an audio kit (stereo headset and microphone)

Auxiliary audio jack (AUX) 2.5mm: can be used to connect an audio source, like

a stereo iPod/MP3 player or PMR446 transceiver

In addition the BTX2 has a ip up antenna on the top for maximum distance per-

formance.

To lift the antenna, press gently backward and the antenna will automatically

lift up.

To close the antenna just press it down and be sure to move it back into the closed

position.

Description of the audio kit

The audio system includes two ultra-at

stereo speakers and two interchangeable

microphones, which are both supplied with

a bracket and wired connection.

Fixing the stereo speakers

The two stereo speakers have a Velcro/adhesive strip that aids their xing into

your helmet.

Beware not to completely cover your ear with the speakers, you must always be

able to listen to the trac sound and your indicators.

The microphone can be xed onto the helmet in two ways:

Boom Microphone

Place the section with the Velcro/adhesive strip between the padding and the

Middle button

Volume -Volume +

Forward button Backward button

Charger jack

Audio kit jack

Auxiliary audio jack (AUX)

Midland BTX2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BTX2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info