Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
Operating and installation instructions
Built-in coffee machines
CVA 5060
CVA 5068
To avoid the risk of accidents
or damage to the machine,
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 09 248 830
en-GB
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Operating and installation instructions

    Built-in coffee machines
    CVA 5060
    CVA 5068

    To avoid the risk of accidents
    or damage to the machine,
    it is essential to read these
    instructions before it is installed
    and used for the first time.

    en - GB
    M.-Nr. 09 248 830



  • Page 2

    Contents
    Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
    Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Accessories supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    Using the coffee machine - first steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
    Filling the water and coffee bean containers . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
    Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
    Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
    Pre-warming cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
    Adjusting the height of the central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
    Preparing espresso and coffee from freshly ground beans . . . . . . . . . . . . . . . . . 20
    Double portion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Making espresso and coffee using ready ground coffee . . . . . . . . . . . . . . . . . . . 21
    Adding ready ground coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    To make a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Cappuccino, latte macchiato, hot milk, milk froth. . . . . . . . . . . . . . . . . . . . . . . 23
    User profile drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
    After use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
    Setting the coffee grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25



  • Page 3

    Contents
    Settings: Customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
    Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
    Selecting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
    Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Coffee jug (making several cups one after the other) . . . . . . . . . . . . . . . . . . . . . . 31
    Setting the amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    Setting Pre-brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Setting Automatic rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Setting Eco mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Lighting: Setting the brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Lighting: Setting the switch-off time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Info (showing the number of drinks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    Safety (activating the System lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    To activate or deactivate the system lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    To override the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Setting the water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Setting the volume (keypad tone, buzzer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    Activating the plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Resetting the factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Miele|home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Programming the amount: setting the portion sizes . . . . . . . . . . . . . . . . . . . . 41
    Programming the amount of espresso, coffee, hot milk and milk froth
    via the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    Programming the proportions for cappuccino or latte macchiato
    via the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Programming the amount for hot water via the Hot water sensor . . . . . . . . . . . . . 43
    Programming the amount via "Settings". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Setting up User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    Selecting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    Creating a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Changing a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Deleting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    Revert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46



  • Page 4

    Contents
    Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Rinse the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Rinse milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Clean milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Clean milk pipework of any blockages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
    Stainless steel milk flask with lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
    Central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
    Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
    Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
    Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
    Interior and machine door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
    Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
    Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
    Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
    Descaling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
    To run the descaling programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
    Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
    After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
    Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
    Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
    Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
    Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
    Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
    Adjusting the door hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76



  • Page 5

    Caring for the environment
    Disposal of the packing
    material
    The transport and protective packing
    has been selected from materials which
    are environmentally friendly for
    disposal, and should be recycled.
    Ensure that any plastic wrappings,
    bags, etc. are disposed of safely and
    kept out of the reach of babies and
    young children. Danger of suffocation.

    Disposal of your old machine
    Electrical and electronic machines
    often contain materials which, if
    handled or disposed of incorrectly,
    could be potentially hazardous to
    human health and to the environment.
    They are, however, essential for the
    correct functioning of your machine.
    Please do not therefore dispose of it
    with your household waste.

    Please dispose of it at your local
    community waste collection/recycling
    centre, or contact your Dealer for
    advice. Ensure that it presents no
    danger to children while being stored
    for disposal.

    5



  • Page 6

    Guide to the machine
    Exterior view

    a On/Off sensor for switching the coffee machine on and off
    b Display
    c Left arrow, for scrolling through the various programme options
    d OK sensor, for confirming the selection of a programme option and for saving a
    setting
    e Right arrow, for scrolling through the various programme options
    f Sensor for selecting hot water
    g Door grip
    h Hot water spout
    i Lighting
    j Drip tray cover
    k Central spout, height-adjustable
    l Stainless steel milk flask

    6



  • Page 7

    Guide to the machine
    Interior view

    a Master switch
    b Ground coffee chute cover
    c Ground coffee chute
    d Slide control to select fineness of ground coffee
    e Coffee bean container
    f Drip tray with grid for easier carrying
    g Water container
    h Brew unit
    i Waste container
    j Central spout connector (connecting the brew unit and the central coffee spout)
    k Stainless steel milk flask
    l Central spout connector cap
    7



  • Page 8

    Accessories supplied
    Stainless steel milk flask
    For storing and keeping milk cold, with lid (with handle) and
    additional cap
    (not suitable for cleaning in a dishwasher)

    Containers
    Large and small containers for cleaning and rinsing the milk
    pipework

    Coffee spoon
    For adding the correct amount of ground coffee

    Cleaning agent for milk pipework
    For daily cleaning of the milk pipework

    Cleaning tablets
    For degreasing the brew unit

    Descaling tablets
    For descaling the water pipework

    Other accessories and spare parts
    – Test strips for determining the water hardness level
    – Air intake tube for placing on the central spout
    – Silicone grease for lubricating the cap on the central spout
    connector
    – Brush for cleaning the milk pipework
    – Mains connection cable
    – Central spout connector cap

    8



  • Page 9

    Optional accessories
    Miele accessories and cleaning and conditioning products
    are available for your coffee machine.
    These can be ordered via the internet at
    www.miele-shop.com, from the Miele Spare Parts Department
    or from your Miele Dealer.
    Stainless steel milk flask with cap
    For storing and keeping milk cold
    (not suitable for cleaning in a dishwasher)

    Cleaning agent for milk pipework
    For daily cleaning of the milk pipework

    Cleaning tablets
    For degreasing the brew unit

    Descaling tablets
    For descaling the water pipework

    E-Cloth (microfibre cloth)
    Removes finger marks and light soiling

    Silicone grease
    For lubricating the cap on the central spout connector

    <

    Miele|home
    With Miele|home, the coffee machine becomes a
    communication-enabled appliance which can be monitored
    or operated via a PC or mobile phone. For further information,
    please contact Miele.

    9



  • Page 10

    Warning and Safety instructions
    Correct application
    This coffee machine conforms with
    all relevant legal safety
    requirements. Improper use can,
    however, lead to personal injury and
    damage to property.
    To avoid the risk of accidents and
    damage to the machine, please
    read these instructions carefully
    before using it for the first time.
    They contain important information
    on installation, safety, use and
    maintenance. Miele cannot be held
    liable for damage caused by
    non-compliance with these Warning
    and Safety instructions.
    Keep these instructions in a safe
    place and ensure that new users are
    familiar with the content. Pass them
    on to any future owner.

    10

    ~ his coffee machine is not designed
    for commercial use. It is intended for
    use in domestic households and similar
    working and residential environments.
    The appliance is not intended for
    outdoor use.

    ~ It must be used as a domestic
    appliance and only for the preparation
    of espresso, cappuccino, latte
    macchiato etc.

    ~ The appliance can only be used by
    people with reduced physical, sensory
    or mental capabilities, or lack of
    experience and knowledge, if they are
    supervised whilst using it, or have been
    shown how to use it in a safe way and
    understand the hazards involved.



  • Page 11

    Warning and Safety instructions
    Safety with children

    ,Caution. The spouts present a
    danger of burning or scalding.
    Children's skin is very sensitive and
    reacts to hot temperatures.
    Do not allow them to touch hot
    components of the coffee machine
    or to put their hands under the
    spouts.

    ~ Place the coffee machine where it is
    out of the reach of children.
    ~ Children under 8 years of age must
    be kept away from the machine unless
    they are constantly supervised.
    ~ Children 8 years and older may use
    the appliance only if they have been
    shown how to use it in a safe way and
    understand the hazards involved.
    ~ Children must not be allowed to
    clean or maintain the appliance
    unsupervised.
    ~ The coffee machine is not a toy! To
    prevent the risk of injury do not allow
    children to play with it or its controls.
    Remember that coffee and espresso
    are not suitable drinks for children.

    ~ Danger of suffocation. Packaging,
    e.g. cling film, polystyrene and plastic
    wrappings, must be kept out of the
    reach of babies and children.

    Technical safety

    ~ Before setting up the machine,
    check it for any externally visible
    damage. Do not install or attempt to
    use a damaged machine. Danger of
    injury.

    ~ To avoid the risk of damage to the
    machine, make sure that the rating on
    the data plate corresponds to the
    voltage and frequency of the household
    supply, before connecting the machine
    to the mains supply. Consult a qualified
    electrician if in any doubt.

    ~ The electrical safety of this machine
    can only be guaranteed if correctly
    earthed. It is most important that this
    basic safety requirement is observed
    and tested regularly, and where there is
    any doubt the household wiring system
    should be inspected by a qualified
    electrician.
    The manufacturer cannot be held liable
    for the consequences of an inadequate
    earthing system (e.g. electric shock).

    ~ The machine must only be operated
    when built in, to ensure that all
    electrical components are shielded.
    Ensure power is not supplied to the
    machine until after installation, repair
    work or maintenance work has been
    carried out.

    11



  • Page 12

    Warning and Safety instructions
    ~ Do not connect the machine to the
    mains electricity supply by a
    multi-socket adapter or an extension
    lead.
    These do not guarantee the required
    safety of the machine (e.g. danger of
    overheating).

    ~ While the machine is under

    ~ The second electrical connection

    replaced by genuine Miele original
    spare parts. The manufacturer can only
    guarantee the safety of the machine
    when Miele replacement parts are
    used.

    socket on the back of the CVA 5060
    coffee machine may only be used for
    connecting a Miele EGW 4000-14, EGW
    4000-29 or EGW 5000-14 plate warmer.
    Connecting any other appliance would
    damage the machine.

    ~ If the coffee machine is installed
    behind a furniture door, it must not be
    used with the door closed. Do not close
    the furniture door while the coffee
    machine is in use.
    ~ Ensure that there is sufficient
    ventilation around the coffee machine.
    The ventilation gaps in the furniture
    housing unit and the gap between the
    top of the housing unit and the ceiling
    must be at least 200 cm². Otherwise
    condensation can build up and
    damage the machine or the housing
    unit.
    ~ The coffee machine must not be
    used in a non-stationary location (e.g.
    on a ship).

    ~ Installation, maintenance and
    repairs should only be carried out by a
    suitably qualified and competent
    person in accordance with local and
    national safety regulations. Repairs and
    other work by unqualified persons
    could be dangerous and the
    manufacturer will not be held liable.
    12

    guarantee, repairs should only be
    undertaken by a service technician
    authorised by the manufacturer.
    Otherwise the guarantee will be
    invalidated.

    ~ Faulty components must only be

    ~ The machine must be disconnected
    form the electricity supply during any
    repair work or cleanng.

    ~ Never open the outer casing of the
    machine. Tampering with electrical
    connections or components and
    mechanical parts is highly dangerous
    to the user and can cause operational
    faults or electric shock.

    ~ If the coffee machine is to be built in
    above another appliance, there must
    be a full-width, closed shelf between
    them (except when it is combined with
    a Miele built-in plate warming drawer).

    ~ In areas which may be subject to
    infestation by cockroaches or other
    vermin, pay particular attention to
    keeping the machine and its
    surroundings in a clean condition at all
    times. Any damage which may be
    caused by cockroaches or other vermin
    will not be covered by the guarantee.



  • Page 13

    Warning and Safety instructions
    Correct use

    ,Caution. The spouts present a
    danger of burning or scalding. The
    liquids and steam dispensed are
    very hot.
    Please note:
    – Keep well away from the area
    underneath the spouts when hot
    liquids and steam are being
    dispensed.
    – Do not touch hot components.
    – The spouts can spray hot liquid or
    steam.
    – Water in the drip tray can be very
    hot. Take care when emptying it.

    ,Danger of injury. Do not touch
    the brew unit when the appliance is
    connected to the electrical supply.
    ,Never look directly at the lighting
    or use optical instruments to look at
    it.
    Clean the coffee machine and the
    stainless steel milk flask thoroughly
    before using for the first time (See
    "Cleaning and care").

    ~ Please note the following regarding
    water:

    – Change the water every day to
    prevent a build-up of bacteria.
    – Do not use mineral water. Mineral
    water will cause serious limescale
    deposits to build up in your machine
    and damage it.

    ~ Do not use water from a reverse
    osmosis system in this machine. This
    would damage it.

    ~ Never put anything other than
    roasted espresso/coffee beans in the
    coffee bean container. It must never be
    filled with ground coffee as this could
    damage the grinder.

    ~ The ground coffee chute must never
    be filled with anything other than
    ground coffee or brew unit cleaning
    tablets. Otherwise the machine will be
    damaged.

    ~ Do not use milk with additives.
    Sugar additives will adhere to the milk
    pipework and damage the machine.

    ~ Sugar will damage the machine.
    Do not use coffee beans which have
    been treated with anything containing
    caramel, any kind of sugar or any other
    substances. Do not put drinks
    containing sugar, or instant coffee in
    the machine.

    ~ Never place a drink with ignited
    alcohol under the central spout of the
    coffee machine. The flames could ignite
    plastic components and cause fire
    damage.

    – Only use cold, fresh tap water to fill
    the water container. Warm or hot
    water or other liquids could damage
    the machine.

    13



  • Page 14

    Warning and Safety instructions
    ~ Hot water and steam could cause
    scalding. Be very careful when using
    these functions. Make sure you do not
    come into contact with steam or hot
    water. The machine must not be used
    for cleaning objects.
    ~ Do not use a steam cleaner to clean
    this machine. Steam could reach
    electrical components and cause a
    short circuit.

    ~ Clean the machine every day to
    prevent a build-up of bacteria. All parts
    except for the brew unit, coffee bean
    container, the stainless steel milk flask
    and lid, and the cover of the central
    spout are dishwasher safe.
    ~ The machine should be descaled
    regularly, depending on the hardness
    of the water, with the descaling tablets
    supplied. The harder the water, the
    more often the machine must be
    descaled. The manufacturer cannot be
    held liable for damage arising from
    insufficient descaling.

    ~ Only use the descaling tablets
    supplied by Miele and follow the
    instructions on the packet carefully.
    Use the exact proportions
    recommended. Otherwise the machine
    will be damaged.
    ~ Depending on the natural oil content
    of the coffee used, the brew unit could
    become blocked. It is important
    therefore to clean the brew unit with a
    cleaning tablet after approx.
    200 coffees. (A reminder will appear in
    the display).

    14

    ~ Used coffee grounds should be put
    with the organic rubbish or on the
    compost heap, but not emptied down
    the sink, as they could block it.

    ~ Do not swing from or hang anything
    on the door when it is open as this
    could damage the machine.

    ~ The machine is designed to be used
    in areas with an ambient temperature of
    +15 °C to +60 °C. Please do not use it
    anywhere with an ambient temperature
    outside this range.
    For machines with a stainless steel
    front:

    ~ Do not use sticky notes, transparent
    adhesive tape, masking tape or other
    types of adhesive on the stainless steel
    front. These damage the surface,
    causing it to lose its dirt repellent
    protective coating.
    The surface of the stainless steel front
    is susceptible to scratching. Even
    magnets can cause scratching.
    The manufacturer cannot be held
    liable for damage caused by
    non-compliance with these Warning
    and Safety instructions.



  • Page 15

    Using the coffee machine - first steps
    The following notes should help you get
    to know your coffee machine before
    starting to use it.

    C

    Controls
    This machine has sensor controls which
    react to touch. To operate the machine,
    you only need to touch the relevant
    sensor. There are five sensors:
    s

    On/Off sensor: For switching the
    machine on or off

    < > Left/right arrows:
    For scrolling through the various
    programme options
    OK sensor: For confirming the
    selection of a programme option
    and for saving a setting
    -

    G Maintenance programme for milk
    pipework, brew unit, descaling,
    rinsing

    Hot water sensor

    Display

    Settings: Customising your
    machine

    ^ The arrow sensors are used to select
    a programme option in the display.
    Touch the OK sensor when the option
    you want appears highlighted in the
    display.

    Before using for the first time
    The machine must be correctly
    installed and connected (see
    "Electrical connection" and
    "Installation") before it is used for the
    first time. It must then be cleaned
    (see "Cleaning and care").
    Remove any protective foil from the
    front of the machine.
    Switching on

    Espresso
    q

    r

    H

    I

    J

    L

    n

    m

    C

    The following symbols come up in the
    display in the main menu:

    ^ Touch the On/Off sensor s to switch
    on the machine.
    When the machine is switched on for
    the first few times with the master
    switch, a welcome screen and some
    other messages will appear briefly. The
    welcome screen will be displayed each
    time the machine is switched on until 5
    drinks have been prepared.

    q

    Espresso

    r

    Coffee

    H

    Cappuccino

    I

    Latte Macchiato

    J

    Hot milk

    Míele

    L

    Milk froth

    Willkommen

    n

    User profile for up to 9 different
    users

    15



  • Page 16

    Using the coffee machine - first steps
    When you use the machine for the very
    first time, you will be prompted to
    select a language.

    If everything has been entered
    correctly, Set up successful will
    appear in the display.

    ^ Use the right or left arrow until the
    language you want appears in the
    display.

    ^ Confirm this message by touching
    the OK sensor.

    ^ Touch the OK sensor.
    The language you have chosen is
    now set.
    The request to set the clock format will
    then appear.
    ^ Use the arrows to select the clock
    format you want (12 h or 24 h), and
    then touch the OK sensor.
    ^ Enter the time of day: First set the
    hour with the arrow sensors and then
    touch the OK sensor. Then set the
    minutes in the same way.
    ^ Now decide when you want the time
    of day to be displayed, and press the
    OK sensor.
    – "On": The display will always show
    the time of day (even when the
    machine is switched off).
    – "On for 60 seconds": The display
    will show the time for 60 seconds,
    and then go dark after the machine
    is switched off.
    – "Do not display": The display will
    only show the time of day when the
    machine is switched on, and will go
    dark as soon as it is switched off.
    ^ Touch the OK sensor to confirm that
    your machine is communication
    enabled.

    16

    To get the best out of your
    coffee machine and to set it
    up for your specific
    requirements, please continue to work
    through these operating instructions.
    Switching off
    ^ Touch the On/Off sensor s to switch
    off the machine.



  • Page 17

    Filling the water and coffee bean containers
    The coffee machine must be
    cleaned thoroughly (see "Cleaning
    and care") before you fill it with water
    and coffee beans.
    It is vital that you programme in
    the water hardness level of your
    water (see "Settings: Customising
    your machine - Setting the water
    hardness").

    Filling the water container
    The quality of the water plays
    an important part in the
    overall quality of the coffee.
    The water container should therefore be
    emptied and filled with fresh tap water
    every day.
    Hot water and other liquids could
    damage the machine. Only use
    cold, clean tap water and fill the
    machine every day. Do not on any
    account use mineral water. Mineral
    water will cause serious limescale
    deposits to build up in your machine
    and damage it.

    ^ Pull the water container forwards to
    remove it.
    ^ Remove the lid, and fill the water
    container with cold, clean tap water
    up to the "Max." mark.
    A valve at the front of the water
    container will ensure that water
    cannot escape.
    ^ Put the lid back on and replace the
    container in the machine, pushing it
    right to the back until it clicks into
    position.
    The water container must click into
    position and sit in the machine
    correctly to ensure the valve is
    sealed. If you do not hear it click into
    position or the water container
    protrudes slightly or does not sit flat
    on the floor, check whether the
    surface that the water container sits
    on is dirty and clean it if necessary.

    ^ Open the machine door.

    17



  • Page 18

    Filling the water and coffee bean containers
    Filling the coffee bean
    container
    Only put roasted espresso or coffee
    beans in the container. Anything
    else, including ground coffee, will
    damage the grinder.
    Do not use coffee beans which have
    been treated with caramel, sugar or
    other substances. Do not put drinks
    containing sugar, or instant coffee in
    the machine. Sugar will damage the
    machine.

    ^ Pull out the coffee bean container.
    ^ Push back the lid and fill the
    container with roasted coffee beans.
    ^ Slide the lid back into place,
    ^ push the coffee bean container back
    into the machine and close the
    machine door.

    18



  • Page 19

    Making drinks
    Switching on

    Pre-warming cups

    When you switch the coffee machine on
    it will start heating up and the pipework
    will be rinsed through. This cleans and
    pre-heats the pipework in preparation
    for making coffee.

    The cups should always be
    pre-warmed to allow the flavour to
    develop and be retained. The aroma of
    espresso does not react well to cold.
    The smaller the volume of
    coffee/espresso and the thicker the
    cup, the more important it is to
    pre-warm the cup. Use a plate warming
    drawer if you have one. If not, you can
    warm them as follows:

    ^ Touch the On/Off sensor s.
    The following message will then
    appear:
    Heating phase

    ^ Place the cup to be warmed under
    the hot water spout.

    If the automatic Rinsing programme
    option has been set to "On" (factory
    default setting), the following will
    appear after the machine has heated
    up:
    Rinsing

    Water will run out of the central spout.

    ^ Touch the Hot water sensor.
    ^ Run a little hot water into the cup to
    warm it.
    ^ Touch the OK sensor to stop the flow
    of water.
    ^ Leave the cup for about a minute
    until it is warm, then pour the water
    away.

    To prevent water from
    running into the drip tray,
    always place an empty cup
    or the small cleaning container under
    the central spout before making the first
    drink.
    The main menu will then appear in the
    display:
    Espresso
    q

    r

    H

    I

    J

    L

    n

    m

    C

    19



  • Page 20

    Making drinks
    Adjusting the height of the
    central spout
    The height of the central spout can be
    adjusted to suit the height of the cup so
    that the drink will not cool down as
    quickly as it would if the spout were
    further away from the cup. The crema
    will also be a better quality if the coffee
    does not have so far to go!
    ^ Place a cup under the central spout.
    The coffee is always dispensed
    simultaneously from both spouts.

    Espresso
    q

    ^ Slowly pull the central spout
    downwards.

    Preparing espresso and coffee
    from freshly ground beans
    You can programme the size
    of portion dispensed for
    espresso and coffee
    according to taste (see "Programming
    the amount: setting the portion sizes").
    Espresso, coffee, double espresso and
    double coffee are all dispensed in the
    same way:

    20

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Select the type of coffee you want
    with the arrow sensors and touch the
    OK sensor once.
    The machine will now grind the coffee
    beans, pre-brew the ground coffee (if
    the "Pre-brewing" option has been set
    to "On") and the coffee will then be
    dispensed from the coffee spouts.
    Do not open the machine door
    during the brewing process. This will
    damage the machine.
    To ensure that any coffee residues
    from the factory testing process are
    removed from the brewing system,
    please throw away the first two
    cups of coffee.



  • Page 21

    Making drinks
    Double portion
    If you want to dispense a double
    portion of coffee or espresso or to
    dispense two portions at the same time:
    ^ touch the OK sensor a second time
    whilst "2 portions?" is in the display.
    The two portions will be dispensed one
    after the other.

    ^ To prepare two cups at the same
    time, place one cup under each jet.
    Cancelling preparation
    ^ Touch the OK sensor when "Stop" is
    showing in the display.
    Preparation will be halted.

    Making espresso and coffee
    using ready ground coffee
    Adding ready ground coffee
    If you want to make espresso or coffee
    using ready ground coffee, you can
    add ground coffee to the specially
    designed coffee chute.

    ^ Pull the cover for the coffee chute
    right out of the machine and open up
    the lid (a) to the chute.
    ^ Use the scoop supplied and place
    one level scoop of ground coffee into
    the coffee chute (b). Close the lid.
    ^ Push the cover into the machine and
    close the machine door.
    Make the coffee?
    Yes
    No

    ^ Use the arrow sensor to highlight
    "Yes".
    The display will change to the main
    menu and you can select the drink you
    want.

    21



  • Page 22

    Making drinks
    If you not added any ground
    coffee, you must select "No".
    Otherwise the machine will
    assume that there is ground coffee in
    the chute, and only water will be
    dispensed the next time coffee is
    made!

    Drinks with milk

    To make a drink

    The stainless steel milk flask is vacuum
    insulated to keep the milk cold for a
    period of time. With an ambient
    temperature of about 20 °C, milk at
    6 °C can be stored for 11-12 hours and
    remain under 13 °C. (Milk that is
    warmer than 13 °C should not be used
    because it will not make good milk
    froth).
    Milk cannot be stored for as long as
    11-12 hours if there is a warming
    drawer underneath the coffee machine.

    ^ Place a cup under the central spout.
    ^ Touch the OK sensor.
    The machine will prepare espresso or
    coffee, which will then be dispensed
    from the central spout.
    Do not open the machine door
    during the brewing process. This will
    damage the machine.
    At the end of the process, the coffee
    machine will revert automatically to
    making coffee with coffee beans.
    Cancelling preparation
    ^ Touch the OK sensor.

    Stainless steel milk flask
    If using animal milk, only use only
    pasteurised milk to avoid a build-up
    of bacteria.

    Do not fill the stainless steel milk
    flask to the rim. You need to leave a
    gap of at least 2 -3 cm below the
    rim.

    Preparation will be halted.
    Only one portion can be prepared at
    a time when using ready ground
    coffee. This is because the machine
    will use all the ground coffee which
    has been added to the chute to
    prepare one coffee.

    22

    It is important to keep the top of the
    flask and the seals clean (whilst
    filling it and carrying it). Any soiling
    can lead to a malfunction of the flask
    in the machine.
    It is important to pre-heat
    the cup with hot water
    before making your drink.



  • Page 23

    Making drinks
    To make drinks with milk,

    Cappuccino, latte macchiato, hot
    milk, milk froth
    ^ Place a suitable cup or glass under
    both jets.

    ^ place the lid on the stainless steel
    milk flask by twisting it anticlockwise
    until it locks into place.

    For best results with latte
    macchiato, the glass should
    be placed beneath the jets
    such that the espresso flows into the
    centre of the milk froth.
    Cappuccino
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor until the
    symbol for the drink you want is
    highlighted and then touch the OK
    sensor once.
    ^ Touch the OK sensor again to stop
    dispensing.

    ^ Open the machine door and hang the
    milk flask in the machine as
    illustrated, ensuring that the milk
    pipework is correctly engaged.

    You can then specify the proportions
    of coffee, milk froth and hot milk
    required for the drink (see
    "Programming the amount: setting
    the portion sizes").

    ^ Close the machine door.

    23



  • Page 24

    Making drinks
    User profile drinks

    After use

    The User profile function is used to
    select the quantity of water and milk for
    your drink, as well as the fineness of the
    ground, temperature and pre-brewing
    to suit your taste and that of your
    guests (see "Setting up user profiles").

    If you have made a drink with milk, the
    following message appears in the
    display after two minutes:

    If you have set the machine up for a
    specific user profile you must first
    select the user profile required and
    then the type of drink.

    OK

    ^ Touch the OK sensor.
    The milk pipework will now be rinsed.

    User profile
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow to highlight the
    User profile symbol and then touch
    the OK sensor.
    ^ Select "Select" with the arrow sensors
    and touch the OK sensor.
    ^ Select the user profile you want with
    one of the arrow sensors and touch
    the OK sensor.
    A large user profile symbol n
    will now appear in the
    display to show that a user
    profile has been selected.
    This function operates in the same
    way as a standard profile.

    24

    i
    Start the rinsing
    programme

    Even if you do not confirm the
    message with "OK", the coffee
    machine will automatically rinse the
    milk pipework after a few minutes.
    Before switching the machine off for
    any length of time, the pipework, brew
    system, spouts and milk pipework need
    to be cleaned (see "Cleaning and care:
    Rinse the system" and "Clean milk
    pipework").



  • Page 25

    Setting the coffee grinder
    A good espresso or coffee with a thick,
    even crema depends not only on the
    quality, pressure and temperature of
    the water and the quality of the coffee
    beans, but also on the quantity of
    beans and how finely they are ground.

    The crema is evenly coloured but
    pale

    The crema should have an even
    nut-brown colour with dark stripes
    running through it.

    The crema is very dark brown on one
    side, graduating almost to white on
    the other

    You can set the amount of coffee beans
    to be ground in the main menu (see
    "Settings: Customising your machine Setting the amount of coffee").

    The beans have been ground too finely.
    Set the grinder on a coarser setting.

    Always adjust the amount of beans
    to be ground one stage at a time
    only and then let the machine grind
    this quantity before adjusting the
    amount again. Otherwise the
    machine will be damaged.
    There are various ways to tell whether
    the coffee grinder is set correctly:
    Espresso or coffee flows into the cup
    too quickly
    The beans have been ground too
    coarsely and the pressure is not
    sufficient. Set the grinder on a finer
    setting.
    Espresso or coffee only trickles into
    the cup

    The beans have been ground too
    coarsely. Set the grinder on a finer
    setting.

    To alter the grinder setting

    ^ Push the slide control one setting to
    the left (for finer grinding) or one
    setting to the right (for coarser
    grinding).
    You should be able to feel the notches
    when moving the slide control.
    ^ If the slide control refuses to move,
    close the machine and dispense a
    cup of espresso coffee.
    Then try the slide control again.

    The beans have been ground too finely
    and the coffee will be bitter. Set the
    grinder on a coarser setting.

    25



  • Page 26

    Settings: Customising your machine
    It is easy to customise your machine to
    suit your exact requirements.

    Timer: You can set or activate the
    Timer. The following options are
    available in the "Set" menu:

    Settings menu

    – Switch on at: The machine can be
    set to switch on at a specific time of
    day.

    To select the various programme
    options:
    Settings F
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor until
    "Settings F" appears in the display,
    and then touch the OK sensor.
    ^ Touch one of the arrow sensors until
    the option you want is highlighted.
    ^ Then touch the OK sensor to select
    the highlighted option.
    The option that is currently active on the
    machine will have a tick next to it.
    Possible setting options
    Language F: 22 different languages
    are available to choose from.
    Time of day: You can set either a 24
    hour or 12 hour clock, and choose to
    have the Time of day display on or off.

    – Switch off after: The machine can
    be set to switch off after a pre-set
    time. A time of between 15 minutes
    to 9 hours can be set.
    – Switch off at: The machine can be
    set to switch off at a specific time of
    day.
    Coffee jug: 3 to 8 cups
    Programming the amount: Espresso,
    coffee, cappuccino, latte macchiato,
    hot milk, milk froth and hot water (see
    "Programming the amount: setting the
    portion sizes").
    Amount of coffee: You can set
    different amounts of coffee for
    espresso, coffee, cappuccino and latte
    macchiato.
    Pre-brewing: Long, Normal, Without
    Temperature: The temperature for
    espresso, coffee, cappuccino, latte
    macchiato and hot water can be set
    from minimum to maximum.
    Automatic rinsing: On, Off
    Eco mode: On, Off
    Lighting: Brightness
    Info: No. of drinks, Portions until
    descaling
    Safety: System lock (On, Off)

    26



  • Page 27

    Settings: Customising your machine
    Water hardness: Soft 1, Medium 2,
    Hard 3, Very hard 4
    Display: Contrast, Brightness
    Volume: Buzzer tones, Keypad tone
    Plate warmer (CVA 5060 only): Automatic, On, Off
    Showroom prog.: Demo programme,
    Off
    Factory default: All settings can be
    reset to the factory default, and user
    profiles deleted.

    Selecting the language
    If you want to change the language
    used in the display, use the Settings
    menu and follow the flag symbol.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Language F
    Time of day

    ^ Touch the OK sensor.
    ^ Touch one of the arrow sensors until
    the language you want is highlighted.
    ^ Touch the OK sensor.

    To return to the previous option in
    the menu, select "Back A".
    Further details about the different
    options can be found in the pages
    that follow.

    The setting is saved automatically and
    the display will go back to the previous
    screen.
    All display texts will now appear in the
    language you have just selected.
    If you select the wrong language by
    mistake, find the "Language" option
    via the flag symbol F again.

    27



  • Page 28

    Settings: Customising your machine
    Setting the time of day

    Clock format

    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.

    ^ Use the arrow sensors to select
    "Clock format".

    Settings
    Time of day
    Timer

    ^ Touch the right arrow sensor until
    "Time of day" is highlighted and touch
    the OK sensor.

    ^ Use the right arrow to select a 24 h or
    12 h clock.
    ^ Touch the OK sensor when the option
    you want is highlighted.
    The clock format you have chosen will
    be saved.

    There are three options:
    Setting the time of day
    Display

    ^ Use the arrow sensors to select "Set".

    The Time of day display can be
    switched on or off.

    ^ First set the hour with one of the
    arrow sensors. Touch the OK sensor.

    ^ Use the arrow sensors to select
    "Display".

    ^ Then use the arrow sensors to set the
    minutes. Touch the OK sensor.

    You can now choose one of three
    options:

    The time of day is now saved.

    – "On": The display will always show
    the time of day (even when the
    machine is switched off).

    You can also set the time of
    day and alter the display
    options when the coffee
    machine is switched off.

    – "On for 60 seconds": The display
    will show the time for 60 seconds,
    and then go dark after the machine
    is switched off.
    – "Do not display": The display will
    only show the time of day when the
    machine is switched on, and will go
    dark as soon as it is switched off.
    ^ Once you have selected the display
    format you require, touch OK.

    28

    To do this:
    ^ Touch the OK sensor whilst the
    machine is off.
    ^ Select "Time of day" and touch the
    OK sensor.
    Now select "Display" or "Set" and alter
    as required.
    ^ Touch the OK sensor to save the
    setting.



  • Page 29

    Settings: Customising your machine
    Setting the timer
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Timer
    Coffee jug

    ^ Touch the right arrow sensor until
    "Timer" is highlighted and touch the
    OK sensor.
    ^ Select "Set" with the arrow sensors
    and touch the OK sensor.
    There are three options:
    Switch on at:
    You can choose a time for the coffee
    machine to switch on automatically,
    e.g. in the morning for breakfast.
    ^ Select "Switch on at" with the arrow
    sensors and touch the OK sensor.
    ^ First set the hour with one of the
    arrow sensors. Touch the OK sensor.
    ^ Then use the arrow sensors to set the
    minutes. Touch the OK sensor.
    If you activate the Timer, the coffee
    machine will switch on every day at the
    time you have set (see "Activate").

    If Automatic rinsing is set to "On", the
    machine will automatically carry out
    a brief rinse when it switches itself
    on.
    If the System lock is activated, the
    machine will not switch itself on at
    the pre-set time.

    If the machine has switched itself on
    automatically 3 times and no drinks
    or hot water have been dispensed,
    the machine will not switch itself on
    again automatically. The
    programmed times will, however,
    remain in memory and will be
    reactivated after manually switching
    the machine on again. This prevents
    the machine switching itself on
    unnecessarily, for example whilst
    you are away on holiday, and you
    have not cancelled the automatic
    switching on procedure.
    Switch off after:
    To save energy, the machine can be
    set to switch off automatically by
    selecting the "Switch off after" option. A
    time of between 15 minutes and
    9 hours can be set. This time is
    measured from the last time a drink was
    dispensed.
    ^ Select "Switch off after" with the arrow
    sensors and touch the OK sensor.
    For example, 1:00 means that the
    machine will switch off after 1 hour.

    29



  • Page 30

    Settings: Customising your machine
    ^ First set the hour with one of the
    arrow sensors. Touch the OK sensor.
    ^ Then use the arrow sensors to set the
    minutes. Touch the OK sensor.
    The machine will now switch off after
    the time you have set.
    If Automatic rinsing is set to "On"
    and the machine has been used for
    making drinks, it will automatically
    carry out a brief rinse before it
    switches itself off.
    Switch off at:
    If you always use your machine at a
    particular time of the day you can set it
    to switch off automatically at a specific
    time.
    ^ Select "Switch off at" with the arrow
    sensors and touch the OK sensor.
    ^ First set the hour with one of the
    arrow sensors. Touch the OK sensor.
    ^ Then use the arrow sensors to set the
    minutes. Touch the OK sensor.
    If you activate the Timer, the coffee
    machine will switch off every day at the
    time you have set (see "Activate").
    If Automatic rinsing is set to "On"
    and the machine has been used for
    making drinks, it will automatically
    carry out a brief rinse before it
    switches itself off.

    30

    Activate
    ^ Select "Activate" with the arrow
    sensors and touch the OK sensor.
    The "Switch on at" and "Switch off at"
    options will show in the display.
    Activate
    8 Switch on at
    8Switch off at

    ^ Select the option required with one of
    the arrow sensors.
    Touching the OK sensor activates the
    option (ticked box) or deactivates it (no
    tick).
    ^ Use one of the arrow sensors to
    select "Accept" and then touch the
    OK sensor.
    ^ Now use one of the arrow sensors to
    select "Back A" and touch the OK
    sensor.



  • Page 31

    Settings: Customising your machine
    Coffee jug (making several
    cups one after the other)
    This function can be used to make up
    to 8 cups of coffee automatically one
    after the other (max. 1 l).
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Coffee jug
    Prog. the amount

    ^ Touch the right arrow sensor until
    "Coffee jug" is highlighted and touch
    the OK sensor.
    ^ Select the number of cups you wish
    to make (3 to 8), and confirm with
    OK.
    ^ Place a coffee jug of a suitable size
    under the central spout and follow
    the directions in the display.
    The coffee for each cup is individually
    ground, brewed and poured. Each
    stage of the process is shown in the
    display. You can cancel the process at
    any time by touching the OK sensor
    ("Stop").
    ^ When "Programme finished"
    appears in the display, confirm with
    OK.

    Setting the amount of coffee
    Both the flavour and the crema on the
    coffee depend on the quantity of
    ground coffee used.
    6 to 14 grams of coffee beans are used
    per cup, depending on the type of
    coffee. The greater the quantity, the
    stronger the espresso, coffee,
    cappuccino, latte macchiato or
    cappuccino.
    The quality of the crema is also affected
    by the quantity:
    – If the crema is evenly coloured but
    pale, it could mean that too little
    coffee is being used.
    – If the crema is very dark brown on
    one side, graduating almost to white
    on the other, it could mean that too
    much coffee is being used.
    You can set different
    amounts of coffee beans to
    be ground for espresso,
    coffee, cappuccino and latte
    macchiato.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Amount of coffee
    Pre-brewing

    ^ Touch the right arrow sensor until
    "Amount of coffee" is highlighted and
    touch the OK sensor.

    31



  • Page 32

    Settings: Customising your machine
    ^ Use the arrow sensor to select the
    drink that you wish to set the amount
    of coffee for and then touch the OK
    sensor.
    ^ Use the arrow sensor to set the
    amount to "more" or "less".
    ^ Touch the OK sensor to save the
    setting.

    Setting Pre-brewing
    When the Pre-brewing function is
    switched on, the freshly ground coffee
    is first moistened with a little hot water.
    Then the remaining water is forced
    through the moistened coffee at high
    pressure. This will make the aroma of
    the coffee considerably more intensive.
    Without pre-brewing, hot water is
    forced straight away at high pressure
    through the ground coffee.
    You can select a normal or extra long
    Pre-brewing, or deselect Pre-brewing
    altogether. The machine is delivered
    with Pre-brewing set at Off (=
    Without) .
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Pre-brewing
    Temperature

    ^ Touch the right arrow sensor until
    "Pre-brewing" is highlighted and
    touch the OK sensor.

    32

    ^ Use the arrow sensors to highlight
    the Pre-brewing option.
    ^ Touch the OK sensor to save the
    setting.

    Setting the temperature
    Different temperature ranges can be
    selected to take account of making
    coffee at different altitudes. If the
    machine is located above 2000 meters
    above sea level the temperatures need
    to be set lower due to the change in
    pressure.
    There is a choice of five temperature
    settings for each type of coffee, and
    three for hot water.
    Not all types of coffee can
    withstand a high
    temperature. Certain types
    are too delicate and the crema on top
    would not be so good.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Temperature
    Automatic rinsing

    ^ Touch the right arrow sensor until
    "Temperature" is highlighted, and
    then touch the OK sensor.
    ^ Use the arrow sensors to highlight
    the drink for which you wish to set the
    temperature, and then touch the OK
    sensor.



  • Page 33

    Settings: Customising your machine
    ^ Use the arrow sensors to highlight
    the temperature option.
    ^ Touch the OK sensor to save the
    setting.

    Setting Automatic rinsing
    The pipework is rinsed through
    automatically when the coffee machine
    is switched off if the automatic rinsing
    function is switched on and the coffee
    machine has been used for preparing
    drinks.
    The machine is delivered with
    automatic rinsing switched on.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Automatic rinsing
    Eco mode

    ^ Touch the right arrow sensor until
    "Automatic rinsing" is highlighted and
    touch the OK sensor.

    Setting Eco mode
    Eco mode is an energy saving mode in
    which the steam system for preparing
    hot milk or milk froth has to heat up.
    With Eco mode switched off, milk froth
    or hot milk, and coffee or espresso can
    be made in rapid succession. The
    steam system remains heated up and
    this uses considerably more energy.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Eco mode
    Lighting

    ^ Touch the right arrow sensor until
    "Eco mode" is highlighted and touch
    the OK sensor.
    ^ Touch one of the arrow sensors to
    select "On" or "Off", and then touch
    the OK sensor.
    The altered energy consumption mode
    is displayed.

    ^ Touch one of the arrow sensors to
    select "On" or "Off", and then touch
    the OK sensor.
    It is a good idea to set this
    option to "On" so that the
    rinse process cannot be
    forgotten.

    33



  • Page 34

    Settings: Customising your machine
    Lighting: Setting the
    brightness

    ^ Touch the OK sensor whilst the
    machine is off.

    You can set how bright the lighting
    should be on the machine:

    ^ Select "Lighting" and touch the OK
    sensor.

    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.

    ^ Select "Switch off after" and touch the
    OK sensor.

    Settings
    Lighting
    Info

    ^ Touch the right arrow sensor until
    "Lighting" is highlighted, and then
    touch the OK sensor.
    ^ Select "Brightness", and then touch
    the OK sensor.
    ^ Touch one of the arrow sensors to
    select a lighter or darker setting, and
    then touch the OK sensor.
    To switch the lighting off:
    ^ Touch the left arrow sensor until
    none of the small white bars is
    showing.

    ^ Select the switch-off time you want
    with the arrow sensors and touch the
    OK sensor.
    ^ Select "Brightness", and then touch
    the OK sensor.
    ^ Touch one of the arrow sensors to
    select a lighter or darker setting, and
    then touch the OK sensor to save the
    setting (factory default setting: Off).
    ^ Touch "Back A" twice to leave the
    menu.
    The lighting will switch off automatically
    after the duration set.
    If you do not want the coffee machine
    to be lit up after it is switched off
    (factory default setting):

    Lighting: Setting the switch-off
    time

    ^ Touch the OK sensor whilst the
    machine is off.

    The machine lights up when switched
    on. It switches off automatically after 15
    minutes of inactivity to save energy.

    ^ Select "Lighting" and touch the OK
    sensor.

    The lighting can be set to remain on
    after the machine is switched off, and
    then to go out automatically after a
    specified time if the machine is not
    used.
    This duration can be set to between 15
    minutes and 6 hours:
    ^ Switch the machine off.

    34

    ^ Select "Brightness", and then touch
    the OK sensor.
    ^ Touch the left arrow sensor until
    none of the small white bars is
    showing.
    ^ Touch "Back A" twice to leave the
    menu.



  • Page 35

    Settings: Customising your machine
    Info (showing the number of
    drinks)

    Safety (activating the System
    lock)

    The "Info" option enables you to check
    how many drinks the machine has
    already dispensed or how many you
    can still dispense before it has to be
    descaled.

    The machine can be locked to ensure
    that it is not operated by unsupervised
    children or persons who are
    unacquainted with the operating
    instructions.

    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings

    When the machine is locked, the
    "Switch on at" setting of the timer will
    not work.

    Info
    Safety

    ^ Touch the right arrow sensor until
    "Info" is highlighted and touch the OK
    sensor.
    ^ Select "No of drinks" or "Portions until
    descale" with the arrow sensors and
    touch the OK sensor.
    With "No of drinks" you can check the
    "Total number of coffees" or the number
    of portions dispensed to date of a
    particular type of coffee, milk froth, hot
    milk or hot water.
    ^ Touch the OK sensor to return to the
    previous display.

    To activate or deactivate the system
    lock
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Safety
    Water hardness

    ^ Select "Safety" with the arrow sensors
    and touch the OK sensor.
    ^ Use an arrow sensor to highlight
    "System lock" and then touch the OK
    sensor.
    ^ Select "On" with the arrow sensors
    and touch the OK sensor.
    The machine will now lock as soon as it
    is switched off and cannot be switched
    on again. If a sensor is touched, a
    message and a locked padlock X will
    appear in the display.
    To deactivate the System lock,
    proceed as above, but select "Off".

    35



  • Page 36

    Settings: Customising your machine
    To override the System lock
    ^ Touch the OK sensor for about 3
    seconds.
    The machine is now temporarily
    unlocked and can be used to make
    drinks again. It locks itself as soon as
    the machine is switched off.

    Setting the water hardness
    For trouble-free operation of the coffee
    machine, and to ensure that the
    descaling reminder appears in the
    display at the appropriate time, it is
    important to set the water hardness
    level. The water hardness level
    indicates how much calcium is
    dissolved in the water. The higher the
    calcium content, the harder the water,
    and the harder the water, the more
    often the machine will need to be
    descaled.
    The machine measures the amount of
    water which has been taken in
    (including the amount required for
    producing steam). The amount of water
    which the machine can use before it
    needs to be descaled will depend on
    the water hardness level set. Less
    water will be used in hard water areas
    than in soft water areas.
    Your local water authority will be able to
    tell you the hardness of water in your
    area. Alternatively, you can measure
    the hardness yourself using the
    enclosed test strip:

    36

    ^ Dip the strip in your drinking water for
    approximately a second, then shake
    off any excess water. The result will
    be evident after about a minute.
    The machine has four programmable
    levels:
    – Level 1(soft):
    Local water hardness range 1
    0-8.4°dH (0-1.5 mmol/l)
    Water volume: approx. 80 l
    Steam duration: approx. 90 min.
    – Level 2 (medium):
    Local water hardness range 1
    8.4-14°dH (1.5-2.5 mmol/l)
    Water volume: approx. 60 l
    Steam duration: approx. 60 min.
    – Level 3 (hard):
    Local water hardness range 2
    14-21°dH (2.5-3.7 mmol/l)
    Water volume: approx. 40 l
    Steam duration: approx. 30 min.
    – Level 4 (very hard):
    Local water hardness ranges 3-4
    21°dH ( 3.7 mmol/l) or more
    Water volume: approx. 20 l
    Steam duration: approx. 20 min.



  • Page 37

    Settings: Customising your machine
    Setting the display
    If the water is harder than 40°dH/7.0
    mmol/l, limescale will build up more
    rapidy than with soft water.
    Descaling will need to be carried out
    more regularly than stated to
    prevent limescale damage to the
    machine.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Water hardness
    Display

    ^ Use the arrow sensors to highlight
    "Water hardness" and then touch the
    OK sensor.
    ^ Touch one of the arrow sensors to set
    the water hardness, and then touch
    the OK sensor.
    The water hardness level selected is
    saved to memory.

    You can adjust both the contrast and
    the brightness of the display:
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Display
    Volume

    ^ Touch the right arrow sensor until
    "Display" is highlighted and touch the
    OK sensor.
    ^ Touch one of the arrow sensors to
    select "Contrast" or "Brightness" and
    touch the OK sensor.
    ^ Touch one of the arrow sensors to set
    the contrast lower or higher or the
    brightness lighter or darker.
    ^ Touch the OK sensor to save the
    setting.

    37



  • Page 38

    Settings: Customising your machine
    Setting the volume (keypad
    tone, buzzer)

    Activating the plate warmer

    You can choose for a tone to sound
    each time a sensor is touched. The
    volume of the tone can also be
    adjusted:

    You can connect a Miele EGW 4000-14,
    -29 or an EGW 5000-14 to the coffee
    machine using a special connection
    cable available as an optional
    accessory from your Miele Dealer or the
    Miele Spare Parts Department.

    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Volume
    Plate warmer

    ^ Touch the right arrow sensor until
    "Volume" is highlighted, and then
    touch the OK sensor.
    ^ Touch one of the arrow sensors to
    select "Buzzer tones" or "Keypad
    tone" and touch the OK sensor.
    ^ Touch one of the arrow sensors to set
    the volume quieter or louder.

    (CVA 5060 only)

    Once the plate warmer is connected,
    you will need to "install" the plate
    warmer in the "Settings" menu.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Plate warmer
    Showroom prog.

    ^ Touch the right arrow sensor until
    "Plate warmer" is highlighted and
    touch the OK sensor.

    If you continue towards the left until
    none of the small white bars is showing,
    the tone will be switched off.

    There are three options:

    ^ Touch the OK sensor to save the
    setting.

    The plate warmer will switch on and off
    together with the coffee machine. The
    plate warmer must be switched on with
    the On/Off sensor.
    If you have programmed the coffee
    machine to switch on at a specific time,
    the plate warmer will always switch on
    approx. 30 minutes before the coffee
    machine is due to switch on so that
    your cups are warmed up ready for
    your coffee.

    38

    Automatic



  • Page 39

    Settings: Customising your machine
    On

    Showroom programme

    You can switch the plate warmer on
    and off manually whenever you want,
    independently of the coffee machine.

    This function enables the machine to be
    illuminated in a showroom situtation
    without the heaters working.

    Off

    Resetting the factory default
    settings

    The plate warmer will not switch on
    because the coffee machine is not
    supplying it with any electricity. The
    coffee machine is delivered with "Off"
    as the default setting.
    To switch the plate warmer on
    independently of the coffee machine
    You can switch the plate warmer on via
    the coffee machine, even without the
    coffee machine being switched on.
    ^ Touch the OK sensor whilst the
    machine is off.
    ^ Select "Plate warmer" and touch the
    OK sensor.
    ^ Select "Manual - on" and touch the
    OK sensor.

    The "factory default" setting is used to
    reset the various settings back to the
    default status.
    From here you can select whether to
    reset all settings back to the default or
    to delete any user profiles.
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Factory default
    Back #

    ^ Use an arrow sensor to highlight
    "Factory default", and then touch the
    OK sensor.
    Various options will then be available:

    The plate warmer is now switched on.
    To switch the plate warmer off again,
    proceed as above again, but select
    "Manual - off" instead of "Manual on".
    If you have forgotten to switch the
    plate warmer off, it will switch itself
    off automatically after a maximum of
    9 hours.

    39



  • Page 40

    Settings: Customising your machine
    All settings
    This option sets "All settings" back to
    the factory default.
    ^ Select "Reset" under "All settings",
    and touch the OK sensor.
    All settings are then reset to the default.
    If you select "Reset" by
    mistake, switch the coffee
    machine off: Resetting to the
    factory defaults will not be carried out.
    Factory default settings (the coffee
    machine is delivered with the
    following settings)

    – Display: Display - Contrast (medium),
    Brightness (maximum)
    – Volume: Volume of buzzer tones and
    keypad tone (maximum setting for
    both)
    – User profile: Revert (when switched
    on).
    User profiles
    You can delete all user profiles except
    for the standard one under "User
    Profiles".
    ^ Select "Reset" under "User profiles",
    and touch the OK sensor.

    – Amount of coffee (medium)

    User profiles are then deleted.

    – Temperatures for coffee and hot
    water (medium settings for both)

    If you select "Reset" by
    mistake, switch the coffee
    machine off: Resetting to the
    factory defaults will not be carried out.

    – Pre-brewing (without)
    – Automatic rinsing and Eco mode
    (both set to "On")
    – Plate warmer and Showroom prog.
    (both set to "Off")
    – Time of day display (On for 60
    seconds),
    Clock format (24 h),
    Timer - Switch on at (12:00),
    Timer - Switch off after (1:00),
    Timer - Switch off at (12:00), (Switch
    on at and Switch off at are both
    deactivated)
    – Coffee jug (3 cups)
    – Lighting: Brightness (medium)
    – Safety: System lock (Off)
    – Water hardness (Very hard 4)

    40

    Miele|home
    With Miele@home, the coffee machine
    becomes communication-enabled and
    can be operated via a pc or mobile
    phone. For further information please
    contact Miele.



  • Page 41

    Programming the amount: setting the portion sizes
    The flavour of the coffee produced
    depends on the type of coffee, how
    finely the beans are ground and the
    quantity of water used. Not all espresso
    and coffee cups are the same size. To
    ensure the machine uses the right
    amount of water to suit your taste and
    your cups, you can programme the
    amount to use.
    With milky drinks the proportions of
    espresso, milk and milk froth are
    important for the taste. These
    proportions can be set for cappuccino
    and latte macchiato.
    You can programme the amount in two
    ways, either by touching the OK sensor
    continually, or via the "Settings" option.
    If a User profile has been activated,
    the proportions for this particular
    User profile will be set.
    If you wish to set the proportions for
    all of the User profiles, select the
    "Standard" user profile.

    Programming the amount of
    espresso, coffee, hot milk and
    milk froth via the OK sensor
    ^ Place the appropriate cup for the
    amount you want to programme
    under the spouts.
    ^ Select the type of drink you require.
    ^ Touch the OK sensor until "Prog. the
    amount" appears in the display.
    ^ When sufficient liquid has flowed into
    the cup and "Save" shows in the
    display, touch the OK sensor again.
    ^ The volumes of water or milk
    programmed in will now be
    dispensed every time that particular
    drink is selected.
    Water flow stops automatically when
    the maximum amount possible is
    reached. The maximum amount
    possible for that type of drink will be
    saved.
    If there is insufficient water or milk in
    the water container or milk flask, the
    process will be stopped and the
    amount will not be saved.

    41



  • Page 42

    Programming the amount: setting the portion sizes
    Programming the proportions
    for cappuccino or latte
    macchiato via the OK sensor
    ^ Place the appropriate cup or glass
    for the amount you want to
    programme under the spouts.
    ^ Select Cappuccino or Latte
    Macchiato.
    ^ Touch the OK sensor until the display
    shows the options for Cappuccino
    (Milk froth, Espresso) or Latte
    Macchiato (Hot milk, Milk froth,
    Espresso).
    Latte Macchiato
    8 Hot milk
    8 Milk froth

    ^ Use the arrow sensor to select the
    component you wish to set the
    amount for.
    ^ Touch the OK sensor to activate a
    tick next to the component you have
    selected so that you can then
    programme its amount.
    ^ Repeat this for all components
    required for that drink.
    ^ Select "Start" with the arrow sensors
    and touch the OK sensor.
    The machine will now start the process
    for making a cappuccino or latte
    macchiato.
    As soon as the component required
    starts to flow into the cup or glass
    "Programme the amount" will appear in
    the display.

    42

    ^ Once sufficient has flowed into the
    cup or glass and "Save" shows in the
    display, touch the OK sensor to save
    the amount.
    Each subsequent drink of this type will
    then have the same proportions of
    coffee, milk etc.



  • Page 43

    Programming the amount: setting the portion sizes
    Programming the amount for
    hot water via the Hot water
    sensor
    ^ Place the appropriate cup for the
    amount you want to programme
    under the hot water spout.
    ^ Touch the Hot water sensor until
    "Prog. the amount" appears in the
    display.
    ^ Once sufficient water has flowed into
    the cup and "Save" shows in the
    display touch the Hot water sensor
    again.
    Each subsequent portion of hot water
    will then have the same amount.

    Programming the amount via
    "Settings"
    ^ Select "Settings F" from the Main
    menu, and then touch the OK sensor.
    Settings
    Prog. the amount
    Amount of coffee

    ^ Use the arrow sensors to highlight
    "Prog. the amount", and then touch
    the OK sensor.
    ^ Use the arrow sensors to select the
    drink you wish to set the amount for.
    ^ Select "Start" and touch the OK
    sensor.
    The procedure is now the same as for
    programming the amount using the OK
    sensor or the Hot water sensor.

    43



  • Page 44

    Setting up User profiles
    To cater for different tastes and
    preferences, you can enter up to 9
    individual User profiles. For each User
    profile, you can select the following
    individual settings:
    – The amount of water for
    coffee-based drinks and hot water
    – The amount of milk for drinks with
    milk

    – The water temperature
    – Pre-brewing
    (See "Programming the amount: setting
    the portion sizes" and "Settings:
    customising your machine").
    User profile
    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor until
    "User profile" is highlighted, and then
    touch the OK sensor.
    You can now:
    – Select User profile from the User
    profiles which are already allocated.
    – Create User profile, if you want to
    enter a new User profile.

    44

    – Change User profile, if you want to
    alter a User profile.
    – Delete User profile, if you want to
    delete a User profile.
    – Revert: You can programme the
    machine so that it always reverts to
    the Standard User profile or so that it
    continues to operate using a User
    profile you have set.

    – The amount of coffee

    q

    The following options only appear if you
    have already entered a new User
    profile in addition to the Standard User
    profile:

    Selecting a User profile
    ^ Select the User profile you want with
    the arrow sensors and touch the OK
    sensor.

    +

    Espresso
    George

    q

    r

    H

    I

    J

    L

    n

    m

    C

    To show that a user has
    been selected, the top line of
    the display will now show a
    large symbol for a "user".



  • Page 45

    Setting up User profiles
    Creating a User profile

    Saving an entry

    ^ Use the arrow sensors to highlight
    "Create", and then touch the OK
    sensor.

    ^ When you have finished making your
    entry, use the arrow sensors to
    highlight the word "OK" and then
    touch the OK sensor.

    You can allocate up to 9 User
    profiles. If you try to allocate more
    than 9 User profiles, "Memory full"
    will appear in the display and you
    will need to delete one name to
    create space.
    Letters and numbers will now appear in
    the display. Use the arrow sensors to
    select the letters and numbers you
    require.
    A new word always starts with a capital
    letter. The rest of the word will
    automatically be in lower case.
    Hyphens and spaces can be used
    between lower case letters.
    ^ Use the arrow sensors to select the
    characters you require.
    ^ Confirm each one with the OK
    sensor.
    The characters you have chosen will
    appear in the top line of the display.
    If you make a mistake, use
    the arrow sensors to select
    the bin symbol and touch the
    OK sensor. The last character will be
    deleted.

    The User profile welcome screen will
    appear briefly in the display, and then
    the Main menu.
    Not saving an entry
    ^ If you don't wish to save your entry,
    use the arrow sensors to highlight the
    word "Back A" and then touch the
    OK sensor.

    Changing a User profile
    Once you have selected the "Change"
    option and confirmed your selection
    with OK,
    ^ select the User profile, and touch the
    OK sensor.
    Now proceed as described in "Creating
    a User profile".
    – To delete a letter, select the bin
    symbol.
    – To enter new characters, select the
    relevant character and confirm with
    OK.
    – Save the new name by selecting
    "OK" in the display and touching the
    OK sensor.

    45



  • Page 46

    Setting up User profiles
    Deleting a User profile

    After each use

    If you want to delete the User profile
    completely,

    The machine will automatically revert to
    the Standard User profile each time a
    drink is dispensed.

    ^ Select "Delete User profile" using the
    OK sensor.
    ^ Use the arrow sensors to select the
    User profile you want to delete.
    ^ Touch the OK sensor.
    A tick will appear after the user profile
    and after a short while it will be deleted.

    Revert
    You can programme the machine so
    that it reverts to the Standard User
    profile after you have made each drink,
    or so that it continues to operate using
    a User profile you have set.
    To set the profile to be used:
    ^ Select "Revert" with one of the arrow
    sensors.
    You can now select one of the
    following:
    Manually
    The coffee machine will store the User
    profile you have selected until you
    select another one.
    ^ Select "Manually" with the arrow
    sensors and touch the OK sensor.

    46

    ^ Select "After each use" with the arrow
    sensors and touch the OK sensor.
    When switched on
    Each time the machine is switched on it
    will automatically select the Standard
    User profile regardless of which User
    profile was set before the machine was
    last switched off.
    ^ Select "When switched on" with the
    arrow sensors and touch the OK
    sensor.



  • Page 47

    Cleaning and care
    Quick guide
    Clean the coffee machine every day to prevent a build-up of bacteria.
    Recommended frequency

    What do I have to do?

    Each time milk is used to make a
    drink, if more than one hour has
    passed since the last drink was
    made

    Rinse milk pipework

    Rinse the system (pipework)
    Clean the milk pipework (with cleaning agent)
    Every day
    Clean the stainless steel milk flask and lid
    (usually at the end of the day,
    before the machine is switched off) Clean the central spout
    Clean the water container
    Clean the waste container
    Clean the drip tray and the drip tray cover
    Clean the central spout connector
    Once a week
    (or more often if badly soiled)

    Clean the inside of the machine
    Clean the small drip tray inside the machine door
    Clean the brew unit
    Clean the front of the machine (especially straight after
    descaling)

    Once a month

    Lubricate the cap on the central spout connector

    Approx. every 200 portions

    Degrease the brew unit (with cleaning tablets)

    Depending on the hardness of the
    water

    Descale the machine

    As required

    Clean milk pipework of any blockages
    Clean the coffee bean container

    47



  • Page 48

    Cleaning and care
    Always allow the machine to cool
    down before cleaning. Please be
    aware that the water in the drip tray
    will be hot.
    Danger of scalding.
    Do not clean the machine with a
    steam cleaner as this will damage it.
    Do not use cleaners containing
    chlorides, acids, soda or scouring
    agents. These would damage the
    surface.
    It is important to clean the machine
    regularly, as the used coffee grounds
    will soon go mouldy. Sour milk deposits
    can block the milk pipework.
    All removable parts can be cleaned in
    the dishwasher except for:
    – the brew unit
    – the coffee bean container
    – the stainless steel milk flask and lid
    – the cover to the central spout.
    Cleaning parts frequently in a
    dishwasher can cause them to become
    discoloured. This is caused by regular
    contact with food residues (e.g.
    tomatoes) in the dishwasher. The
    surface can also become damaged.

    48

    All surfaces are susceptible to
    scratching. Scratches on glass
    surfaces could even cause a
    breakage.
    Contact with unsuitable cleaning
    agents can discolour the external
    surfaces.
    Wipe up any spillages or splashes
    of descaling agent immediately.
    Avoid the following on all types of
    front:
    – cleaning agents containing soda,
    ammonia, acids or chlorides,
    – solvent-based cleaning agents,
    – descaling agents,
    – stainless steel cleaning agents,
    – dishwasher cleaner,
    – abrasive cleaning agents, e.g.
    powder cleaners and cream
    cleaners,
    – hard, abrasive sponges, e.g. pot
    scourers, brushes or sponges which
    have been previously used with
    abrasive cleaning agents,
    – melamine eraser blocks,
    – sharp metal scrapers.



  • Page 49

    Cleaning and care
    Rinse the system

    Milk pipework

    Before switching the machine off for
    any length of time, the pipework, brew
    system and central spout need to be
    cleaned.
    If you have switched the automatic
    rinsing function off, you will need to
    rinse the system through manually.
    Place the smaller of the two containers
    under the central spout.
    Maintenance
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor to
    highlight the maintenance symbol
    and touch the OK sensor.

    All parts of the milk system need to
    be cleaned thoroughly and
    regularly.
    Milk contains bacteria which
    proliferate rapidly with inadequate
    cleaning. A dirty machine can be
    harmful to health.
    Rinse milk pipework
    To prevent milk going off in the
    machine and the pipework getting
    clogged up, it should be rinsed
    through after use. Rinsing is not a
    substitute for cleaning the pipework
    at the end of the day.

    ^ Select "Rinse the system" and touch
    the OK sensor.
    ^ Select "Start" and touch the OK
    sensor.
    The main menu will reappear in the
    display after the pipework has been
    rinsed. The machine can then be
    switched off.

    Maintenance
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor to
    highlight the maintenance symbol
    and touch the OK sensor.
    ^ Select "Rinse milk pipework" and
    touch the OK sensor.
    ^ Select "Start" and touch the OK
    sensor.
    Follow the instructions in the display.

    49



  • Page 50

    Cleaning and care
    ^ Select "Start" and touch the OK
    sensor.
    The display will let you know the current
    status of the machine or what action
    needs to be taken.
    ^ Follow the instructions step by step.

    To rinse the milk pipework: Fill the
    larger of the two plastic containers
    to the "max" mark with cold water.
    Then fit the lid from the stainless
    steel milk flask making sure it
    engages properly.

    To clean the milk pipework: Fill the
    larger of the two plastic containers
    to the "max." mark with lukewarm
    water, to allow the powder to
    dissolve.
    Then fit the lid from the stainless
    steel milk flask making sure it
    engages properly.

    Clean milk pipework
    To prevent milk going off in the
    machine and the pipework getting
    clogged up it should be cleaned at the
    end of each day using the Miele
    cleaning agent for milk pipework
    supplied.
    This cleaning agent has been specially
    developed for use in Miele coffee
    machines and is available from Miele or
    via the internet at www.miele-shop.com.
    Use only this cleaning agent, as
    others could damage the machine.

    Maintenance
    q

    r

    H

    I

    J

    L

    n

    m

    ^ Touch the right arrow sensor to
    highlight the maintenance symbol
    and touch the OK sensor.
    ^ Select "Clean milk pipework" and
    touch the OK sensor.
    50

    C

    The milk pipework will now be cleaned.
    The pipework is clean once Prog.
    finished appears in the display. You
    can then switch the machine off.



  • Page 51

    Cleaning and care
    Clean milk pipework of any
    blockages
    If you are getting steam instead of milk
    from the central spout the milk
    pipework in the machine is probably
    blocked up.
    If the milk pipework in the lid is
    clogged,
    ^ use the cleaning brush to clean it
    under running water.
    Insert the brush into the pipework
    and move it back and forth as far as
    it will go until all the milk deposits are
    removed.
    If the milk pipework in the machine is
    clogged,
    ^ take the lid off the central spout. Pull
    the jets out of the central spout (See
    "Central spout").
    ^ Open the door.
    ^ Remove the stainless steel milk flask
    and clean it, making sure you
    thoroughly clean the area around the
    lid and neck (see "Stainless steel milk
    flask with lid").

    ^ Release the cover to the milk
    pipework by pressing the tabs in on
    the left and right hand sides.

    ^ Take the cover off together with the
    milk pipework. Clean the whole
    component in the dishwasher without
    dismantling it.
    If there are still milk residues in the
    pipework after this, use the cleaning
    brush supplied to remove them. To do
    so, dismantle the cover and the milk
    pipework as follows:
    Do not take the milk pipework out of
    its holder. This could cause the
    pipes to leak.

    ^ Press down on the small recess in
    the spout's holder (a) and pull the
    holder forwards and out (b). Loosen
    the milk pipework from its guides.

    51



  • Page 52

    Cleaning and care
    ^ Take hold of the second holder by
    pin (c) and pull it upwards and off.
    The hoses can now be cleaned with a
    brush under running water.

    ^ Now push the milk pipes into the
    guides (a) and push the spout
    holder (b) back on. It should click
    into place.
    ^ Push the brush into both milk pipes
    from below. Move the brush in and
    out of the pipes as far as it will go
    until there are no milk residues left in
    them.
    Re-assemble the milk pipework as
    follows:

    ^ Fit the holder with the plug into the
    cover as shown. Make sure that the
    holder fits correctly on the cover.

    52

    ^ Fit the cover with the milk pipes back
    into position behind the machine
    door.
    ^ Re-fit the central spout (see "Central
    spout").



  • Page 53

    Cleaning and care
    Stainless steel milk flask with
    lid
    The stainless steel milk flask with lid
    must be washed by hand using hot
    water.
    It is important to keep the top of the
    flask and the seals clean (whilst filling it
    and carrying it). Any soiling can lead to
    a malfunction of the flask in the
    machine.
    ^ Clean the stainless steel flask with
    hot water after use to remove any
    residual milk.
    ^ Clean the lid under running tap water
    and then clean it thoroughly with a
    clean damp cloth to remove any milk
    residues.
    If the milk pipework in the lid is
    clogged,
    ^ use the cleaning brush to clean it
    under running water.
    Insert the brush into the pipework
    and move it back and forth as far as
    it will go until all the milk deposits are
    removed.

    53



  • Page 54

    Cleaning and care
    Central spout

    ^ Pull the central spout down as far as
    it will go (a), and pull the cover to
    the spout forwards to remove it (b).

    ^ Remove the two rubber stoppers
    (a) and manually clean these and
    the jets thoroughly. If required,
    remove the air intake tube (b). Any
    blockages can be dislodged by
    kneading or "blowing through" the
    tube.
    Do not use a needle or similar
    implement. This would damage the
    components.
    ^ Replace the stoppers.

    ^ Turn the cover around, push the
    insert up and out and then clean both
    parts thoroughly.
    ^ Slide the insert back into the cover
    until it clicks into place.

    ^ After cleaning, push the jets firmly
    back into place on the central spout,
    ensuring they are secure.
    ^ Replace the cover and then push the
    central spout back up into position.
    ^ Pull out the jets in the central spout.

    54



  • Page 55

    Cleaning and care
    Water container

    Waste container

    Empty the water container daily and fill
    with fresh, cold tap water just before
    use.

    After a certain period of time a reminder
    to empty the waste container will
    appear in the display. The waste
    container must be cleaned when this
    message appears. However it is better
    to clean the waste container every day
    to prevent coffee grounds from turning
    mouldy.
    There will probably also be water in the
    waste container left over from the
    rinsing process.

    When cleaning, make sure that there
    is no soiling in the area around the
    valve. Otherwise the container will
    not sit correctly and this could result
    in water leaking from the machine.
    ^ The water container can be cleaned
    in the dishwasher or by hand using
    hot water and a little washing-up
    lliquid. Dry thoroughly after cleaning.

    Lining the waste container
    with one or two pieces of
    kitchen paper towel will
    make it easier to tip the grounds out.
    ^ Clean the waste container with hot
    water and a little washing-up liquid or
    in the dishwasher, and dry with a
    cloth.
    ^ Also clean the now accessible area
    in the machine where the waste
    container sits, thoroughly.

    ^ Clean the surface the water container
    sits on thoroughly, taking special
    care to clean the recesses properly.

    55



  • Page 56

    Cleaning and care
    Drip tray
    There is a sensor in the drip tray which
    causes a message to appear in the
    display when the drip tray is full and
    needs to be emptied. Remove the tray
    and empty and clean it when this
    message appears.
    However, to avoid a build-up of odours,
    the drip tray should be cleaned every
    day.
    After running the last rinse, you
    should leave the drip tray in position
    for a while before cleaning it so that
    you catch any remaining water from
    the system.
    Remove the drip tray carefully, as
    the water in it could be very hot.
    Danger of scalding.
    ^ Open the machine door, and
    carefully remove the drip tray from
    the machine.
    The grid in the drip tray prevents the
    water from spilling out of the tray
    when it is being carried.

    ^ Clean the drip tray and the grid with
    hot water and a little washing-up
    liquid, or in the dishwasher and dry
    with a cloth.
    Make sure that the metal contact
    discs at the top of the drip tray are
    cleaned and dried properly. These
    metal discs send a signal to the
    machine when the drip tray is full or
    if it is not in the machine. The discs
    will not convey these messages if
    they are dirty or damp.
    ^ Push the drip tray with the grid along
    the right hand edge back into the
    machine.
    ^ Close the door.

    Drip tray cover
    ^ Take the drip tray cover out and
    wash it.

    56



  • Page 57

    Cleaning and care
    Coffee bean container
    The coffee bean container must be
    cleaned by hand with hot water and
    a little washing-up liquid.
    ^ Take the coffee bean container out of
    the machine and then push the lid
    back to remove it.

    Interior and machine door
    ^ First take out all removable parts and
    then clean the interior and the
    machine door with a mild solution of
    hot water and washing-up liquid.
    Use your vacuum cleaner to
    remove dry coffee grounds.

    ^ Clean the coffee bean container and
    the lid, and then dry them both
    thoroughly.
    ^ Replace the lid, and push the
    container back into place in the
    machine.

    Central spout connector
    ^ Also clean the small drip tray in the
    lower part of the inside of the door of
    the machine thoroughly.

    The part which connects the brew unit
    and the central spout is located on the
    inside of the machine door.
    ^ Clean this connection regularly with a
    damp cloth, taking care not to wipe
    the grease off the cap.
    ^ Lubricate the cap at least once a
    month with the silicone grease
    supplied.

    57



  • Page 58

    Cleaning and care
    Brew unit
    The brew unit must be cleaned once
    a week by hand and without using
    cleaning agent, because the
    moving parts are lubricated and the
    rubber seals could become brittle in
    a dishwasher.

    Leave the handle in the same
    position, otherwise the brew unit will
    be out of alignment and you will not
    be able to push it back into the
    coffee machine.

    ^ Remove the water container, waste
    container and the coffee chute cover.

    ^ Wipe any remaining coffee off the
    filters. One filter is located in the
    funnel a and the other to the left of
    the funnel b.
    ^ Press the light coloured button under
    the handle of the brew unit a and
    whilst doing so turn the handle in the
    direction of the arrow b.
    ^ Press the catch in front of the brew
    unit c downwards, and pull the brew
    unit carefully out of the machine.
    If the brew unit is difficult to remove,
    it is not correctly positioned (see
    "Problem solving guide").
    ^ Clean the brew unit thoroughly under
    hot running water without using
    washing-up liquid.

    58

    ^ Dry the funnel area a to prevent
    ground coffee from sticking to it.
    ^ Clean the inside of the machine and
    remove any coffee residues.
    Use your vacuum cleaner to
    remove dry coffee grounds.
    ^ Place the brew unit on the guide
    runners and, keeping it straight, push
    it into the machine.



  • Page 59

    Cleaning and care

    Maintenance
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor to
    highlight the maintenance symbol
    and touch the OK sensor.
    ^ Select "Clean brew unit" and touch
    the OK sensor.
    ^ Press the light-coloured button under
    the handle of the brew unit a and
    whilst doing so turn the handle in the
    direction of the arrow b.

    ^ Select "Start" and touch the OK
    sensor.
    Various messages will now appear in
    the display.

    Degreasing the brew unit

    ^ Follow the instructions in the display.

    Depending on the natural oil
    content of the coffee used,
    the brew unit could become
    blocked. It should therefore be cleaned
    after approx. 200 portions have been
    prepared using the cleaning tablets
    supplied with the machine. These
    have been specially formulated for use
    in this coffee machine and are available
    from Miele or via the internet at
    www.miele-shop.com.

    So that you do not have to
    empty the drip tray too
    frequently, place the small
    container under the central spout.
    However, since the inside of the
    machine is also being rinsed through,
    you will still need to empty the drip tray
    so that the cleaning programme can
    continue.

    To remind you to degrease the brew
    unit, the message "Please run the
    cleaning programme" will appear in
    the display after 200 portions. It will
    not go out until the cleaning
    programme has been carried out.
    The cleaning programme lasts for
    approx. 6 minutes.

    59



  • Page 60

    Cleaning and care
    When prompted to Drop a cleaning
    tablet in the ground coffee chute,

    Machine front
    If soiling is not removed promptly it
    could cause the surface of the
    machine to alter or discolour.
    Remove any soiling immediately.
    ^ Switch the machine off with the
    On/Off sensor.

    ^ remove the coffee chute cover and
    open the lid of the coffee chute.
    ^ Place a cleaning tablet into the coffee
    chute.
    ^ Close the lid, replace the coffee
    chute cover and close the machine
    door.
    ^ Follow the instructions in the display.
    When "Prog. finished" appears in the
    display,
    ^ touch the OK sensor.
    The brew unit has now been degreased
    and drinks can be prepared again.

    60

    ^ Clean the front using a damp Miele
    microfibre E-cloth or with a clean
    sponge and a solution of hot water
    and washing-up liquid. Wipe dry
    using a soft cloth.
    Make sure that water cannot get
    behind the display.



  • Page 61

    Descaling the machine
    The machine should be descaled
    regularly to ensure that it functions
    correctly. It will remind you when this
    needs to be carried out.
    When only 50 portions can be made
    before the next descaling programme
    has to be run, the following message
    will appear in the display the first time:
    No. of portions until descaling: 50.
    The remaining number of drinks that
    can be made before descaling will now
    show in the display after each drink is
    made.
    ^ Confirm the message by touching the
    OK sensor.
    If you let it run to 0, "Descaling
    programme must be carried out" will
    appear in the display.
    Touch the OK sensor to start
    the descaling programme. If
    you do not have time to wait
    until the descaling programme has
    finished (it takes approx. 20 minutes)
    you can switch the machine off.
    However, you will not be able to make
    any more drinks until the descaling
    programme has been carried out.

    Only use the descaling tablets
    supplied with the machine. (Make
    sure you use the correct tablets approx. 5 cm diameter, pack of 6).
    These have been specially
    formulated for use in this coffee
    machine and are available from
    Miele or via the internet at
    www.miele-shop.com.
    Other types of descaling agents will
    damage the machine and affect the
    taste.
    Follow the instructions on the
    package carefully to avoid
    damaging the machine.
    Make sure that you wipe up any
    spillages or splashes of descaling
    agent immediately to avoid
    damaging the machine front.
    After running the descaling
    programme, remember to clean the
    water container and the drip tray
    thoroughly to remove any descaling
    residues.

    61



  • Page 62

    Descaling the machine
    To run the descaling
    programme

    To dissolve the descaling tablets

    Maintenance
    q

    r

    H

    I

    J

    L

    n

    m

    C

    ^ Touch the right arrow sensor until
    "Maintenance" is highlighted, and
    confirm with OK, or,
    ^ If the machine is switched off, touch
    the OK sensor whilst the machine is
    switched off.
    ^ Select "Descale" and touch the OK
    sensor.
    ^ Select "Start" and touch the OK
    sensor.
    The display will guide you through the
    whole procedure. Please follow the
    instructions to, for example, empty the
    drip tray, fill the water container etc.
    If the machine has already heated
    up, it will cool down for approx.
    10 minutes before starting to run
    the descaling programme.
    The descaling programme cannot
    be cancelled once the OK sensor
    has been touched. The programme
    has to be completed through to the
    end. This is a safety measure to
    ensure that the machine is fully
    descaled, and is important for the
    long-term protection of the machine
    and to ensure it functions correctly.

    ^ take the water container out and fill it
    to the k mark with lukewarm water.
    (Do not use less water than this
    because this would cause the
    descaling programme to finish before
    it has been completed properly).
    ^ Drop 2 descaling tablets in the
    water. Allow the tablets to dissolve
    fully before shutting the lid and
    putting the water container back in
    the machine.
    During the descaling programme, water
    containing descaling agent will run out
    of the hot water and the central spouts.
    This is followed by an activation period
    before a little more descaling agent is
    dispensed.
    ^ When a message asking you to fill
    the water container with fresh
    water appears, you should remove
    the container and rinse it out
    thoroughly with clean water. Make
    sure all traces of descaling agent are
    removed, and then fill it up to the k
    mark with clean tap water.
    Water will flow out of the spouts during
    the rinsing process. Because the inside
    of the machine is also cleaned during
    this process you will be prompted to
    Empty the drip tray at the end.
    When Programme finished appears in
    the display,
    ^ touch the OK sensor.
    The descaling programme is finished
    and the machine can be used for
    making drinks again.

    62



  • Page 63

    Problem solving guide
    . . . nothing appears in the display.
    Repairs to electrical appliances
    should only be carried out by a
    suitably qualified and competent
    person in strict accordance with
    current local and national safety
    regulations. Repairs and other work
    by unqualified persons could be
    dangerous. The manufacturer
    cannot be held liable for
    unauthorised work.
    Various messages will appear in the
    display to warn of certain problems.
    Follow the instructions to remedy the
    problem.
    Other problems or situations which
    occur in general use are described in
    this section. With the help of the
    following notes, minor faults in the
    performance of the machine, some of
    which may result from incorrect
    operation, can be put right without
    contacting the Service Department.
    What to do if ...
    ... the machine does not light up after
    it has been switched on.
    Has the lighting been switched off?
    ^ If it has, switch it back on (see
    "Settings: customising your machine Lighting").

    The master switch is at "0".
    ^ Set the master switch to "I".
    The plug is not inserted in the socket
    correctly.
    ^ check that the plug is inserted
    correctly and switched on at the
    socket.
    The main fuse has tripped due to a
    problem with the coffee machine, the
    electricity supply or another appliance.
    ^ Contact a qualified electrician or
    Miele.
    ... the machine suddenly switches
    itself off.
    The machine will switch itself off
    automatically after a certain length of
    time if it is not being used. This time
    depends on the switch off time which
    has been programmed.
    There could be stones in amongst the
    coffee beans. If this is the case, the
    machine will switch itself off
    automatically within 20 seconds to
    avoid damage. Call the Miele Service
    Department.
    ^ Is it plugged in and switched on at
    the socket?

    ^ If not, then the lighting is defective.
    Call the Miele Service Department.

    63



  • Page 64

    Problem solving guide
    ... the lighting suddenly switches
    itself off.
    If the machine has not been used for 15
    minutes the lighting will switch itself off
    automatically. (See "Settings:
    customising your machine - Lighting:
    Setting the switch-off time").
    ... the machine does not switch on
    even although the "Switch on at"
    setting for the timer has been
    activated.
    The system lock has been activated.
    ^ Deactivate it. (See "Settings:
    customising your machine - Safety
    (Activating the System lock)".
    The machine was not used after being
    switched on automatically 3 times in
    succession.
    ^ Switch the machine on and make a
    drink.
    ... you cannot read the display.
    If the machine is installed too low down,
    the display can be hard to see.
    ^ Try to improve this by adjusting the
    display contrast or brightness (see
    "Settings: customising your machine Setting the display").

    ... only a little or no coffee or
    espresso is dispensed from the
    central spout.
    Is the central spout connector cap
    positioned correctly? (See "Guide to the
    machine" - "Interior view").
    ^ Lubricate the cap with the silicone
    grease supplied.
    ... milk froth or milk is not flowing out
    of the central spout.
    The spout is clogged up.
    ^ Clean the central spout (taking
    special care to clean the rubber
    stoppers thoroughly) and the milk
    pipework as described in "Cleaning
    and care".
    ... the consistency of the milk froth in
    unsatisfactory.
    The air intake tube is blocked.
    ^ Clean the air intake tube (See
    "Cleaning and care" - "Central
    spout"). Any blockages can be
    dislodged by kneading or "blowing
    through" the tube.
    Do not use a needle or similar
    implement. This would damage the
    components.
    The air intake tube is defective.
    ^ Remove the air intake tube and
    replace it with the spare part
    supplied.

    64



  • Page 65

    Problem solving guide
    ... a message appears in the display
    reminding you to fill or replace the
    milk flask even though it is full and
    positioned correctly.
    ^ Clean the flask thoroughly, paying
    particular attention to the area around
    the lid and the neck (see "Cleaning
    and care - Stainless steel milk flask
    with lid").
    Any soiling in these areas can
    prevent the sensors for the milk flask
    from working properly.
    ... the coffee grinder makes a louder
    noise than usual.
    There may be stones in amongst the
    coffee beans, or the bean container
    may have emptied during grinding.
    ^ Switch the machine off immediately.
    ^ If the bean container is not empty
    call the Miele Service Department. If
    it is empty fill the container with fresh
    beans.
    ... the espresso is dispensed too
    quickly.
    The coffee is too coarsely ground.
    ^ Set the grinder on a finer setting (see
    "Setting the coffee grinder").
    ... the espresso is dispensed too
    slowly.
    The coffee is too finely ground.
    ^ Set the grinder on a coarser setting
    (see "Setting the coffee grinder").

    ... the espresso is not hot enough.
    ^ Have the cups and system been
    pre-warmed?
    The smaller and thicker the cup, the
    more important it is to pre-warm it.
    ^ Check the temperatures the different
    types of coffee have been set to (see
    "Settings: customising your machine Setting the temperature").
    ^ Check whether the brew unit is
    blocked. If it is, clean it (see
    "Cleaning and care - Brew unit").
    ... coffee is not dispensed, even
    though the beans have been ground
    and there is sufficient water in the
    water container.
    ^ Check whether the slide control for
    the fineness of the coffee is at the
    finest setting, or if the amount of
    coffee to be ground has been set at
    the largest amount.
    Because the process is time controlled,
    it is possible that the process has taken
    so long that there is no time left for
    brewing.
    ^ Select a slightly coarser coffee grind
    setting or a lower setting for the
    amount of coffee to be ground (see
    "Setting the coffee grinder" and
    "Settings: customising your machine Setting the amount of coffee").
    ... the machine door will not close.
    ^ Are the containers in position
    correctly?
    ^ It might be necessary to adjust the
    door hinges (see "Installation:
    Adjusting the door hinges").
    65



  • Page 66

    Problem solving guide
    ... you have selected a drink with milk
    and "Heating phase" appears in the
    display.
    The energy-saving Eco mode is active.
    In this mode, the steam system for
    preparing hot milk or milk froth has to
    heat up. After use the steam system will
    cool down again.
    Eco mode is the default setting but this
    can be deactivated, if wished (see
    "Settings - Setting Eco mode"). If Eco
    mode is deactivated, the steam system
    remains hot and ready for use.
    However, with Eco mode deactivated,
    the coffee machine will use
    considerably more energy.
    ... coffee preparation has been
    interrupted.
    If the water container empties whilst a
    drink is being prepared, a message will
    appear in the display to ask if you wish
    for the drink preparation to continue
    after the water container has been
    refilled. If you do not respond to this
    question with "OK" within 5 minutes, the
    drink will be cancelled.
    ... only water is dispensed when
    coffee has been selected.
    The lid of the ground coffee chute has
    been opened and closed, and then the
    "Make the coffee?" (with ground coffee)
    option has been selected. However, the
    coffee chute has not been filled with
    ground coffee.
    After the drink has been dispensed, the
    coffee machine will revert automatically
    to making coffee with coffee beans.

    66

    The beans may have become jammed.
    Pull the bean container out of the
    machine and then push it back in
    again.
    ... a message keeps appearing asking
    you to empty the drip tray even
    though it is empty.
    ^ Have the contacts been properly
    cleaned and dried?
    ^ Is the drip tray positioned correctly in
    the machine?
    ^ Switch the machine off and then back
    on again with the master switch.
    ^ Buff the contacts a little, e.g. with fine
    glasspaper or emery cloth.
    ^ If this fault message continues to
    appear, please call the Miele Service
    Department.
    ... the machine does not rinse
    through when switched on, even
    though the Automatic rinsing
    programme is set to "On".
    If the temperature of the machine is
    above 60 °C, rinsing cannot take place.



  • Page 67

    Problem solving guide
    ... water or milk stops flowing whilst
    programming in the amount to
    dispense.
    The flow stops automatically when the
    maximum fill quantity is reached. The
    maximum quantity is stored in memory.
    If there was not enough water or milk in
    the water container or milk flask, the
    amount that has been dispensed will
    not be saved to memory.
    ^ Fill the water container or the milk
    flask, and repeat the process to
    programme in the amount.
    ... there is water in the waste
    container.
    This is not a fault. The water is left over
    from the brewing and cleaning process.
    ... there is a lot of residual "coffee
    water" in the waste container.
    If the slide control for the grinder is set
    to too coarse a setting, too much
    residual "coffee water" can be left in the
    waste container.
    ^ Set the grinder on a slightly finer
    setting (see "Setting the coffee
    grinder").
    ^ If necessary, adjust the amount of
    coffee (see "Settings: customising
    your machine - Setting the amount of
    coffee").

    ^ If the cap is faulty, replace it with the
    spare part supplied.
    ... the descaling programme was
    started by mistake.
    The descaling programme cannot be
    cancelled once you have touched the
    OK sensor. The programme has to be
    completed through to the end. This is a
    safety measure to ensure that the
    machine is fully descaled, and is
    important for the long-term protection of
    the machine and to ensure it functions
    correctly.
    ^ Descale the machine (see "Descaling
    the machine").
    ... the coffee machine makes loud
    noises during the descaling
    programme.
    During the descaling programme you
    will hear loud noises as water is flushed
    through the machine under high
    pressure. These are no cause for
    concern.
    ... the heating-up time is getting
    longer, the amount of water coming
    through is incorrect and the machine
    is not performing properly.
    The machine needs descaling.
    ^ Descale the machine (see "Descaling
    the machine").

    Is the central spout connector cap
    positioned correctly (See "Guide to the
    machine" - "Interior view")?
    ^ Lubricate the cap of the central spout
    connector with the silicone grease
    supplied.
    67



  • Page 68

    Problem solving guide
    ... no water comes out of the central
    spout.
    The filters in the brew unit are dirty.
    ^ Remove the brew unit and clean the
    filters with your finger (see "Cleaning
    and care - Brew unit").
    ... the brew unit or the waste
    container cannot be pulled out of the
    machine.
    The brew unit is not in the correct
    position. This can happen if, for
    example, the machine door is opened
    during grinding or brewing.
    ^ Close the door. The brew unit will
    position itself correctly automatically.
    ... the crema is not as it should be.
    ^ Check that the grinder setting is not
    too coarse or too fine, and adjust
    accordingly (see "Setting the coffee
    grinder").
    ^ Check the temperatures the different
    types of coffee have been set to. If
    the temperature is too high, there will
    be dark patches in the crema.
    Reduce the temperature (see
    "Settings: customising your machine Setting the temperature").
    The crema will not form correctly if stale
    coffee or an unsuitable coffee blend is
    used or if the central spout is set too
    high.
    ... the central spout connector cap is
    faulty (See "Guide to the machine" "Interior view").
    ^ Replace the cap with the spare part
    supplied.
    68

    ^ Lubricate the cap of the central spout
    connector with the silicone grease
    supplied.
    ... the message "Push water
    container in as far as it will go"
    appears in the display.
    Water has not been taken in.
    ^ The water container has not been
    correctly positioned inside the
    machine. Take it out and push it back
    into the machine so that it clicks into
    position.
    ^ This fault message also appears if
    the water container was not correctly
    filled for descaling. Fill the water
    container up to the marker.
    If this fault message still continues to
    appear in the display, repeat the steps
    described above. If neither is the case
    and the fault message still appears in
    the display, call the Miele Service
    Department.
    ... too much crema has formed and is
    overflowing above the central spout.
    Some types of coffee will produce too
    much crema if the coffee or espresso
    temperature is set to maximum and the
    amount of coffee to be ground is set too
    high.
    ^ Set a lower temperature and reduce
    the amount of coffee to be ground
    (see: "Settings: customising your
    machine - Setting the temperature
    and Setting the amount of coffee).



  • Page 69

    Problem solving guide
    ... the slide control for the grinder
    setting will not move.
    ^ Close the machine door and
    dispense a cup of espresso coffee.
    The grinder setting slide control will
    now move.
    ... "Fault - 1" to "Fault - 4" or "Fault 80" to "Fault - 83" appears in the
    display.
    ^ Switch off the machine using the
    On/Off sensor and wait for one hour
    before switching it on again.
    If the fault message appears in the
    display again, contact the Miele Service
    Department.
    ... the message "Fault - 28" appears
    in the display.
    Enough ground coffee for one portion,
    i.e. a level coffeespoonful of ground
    coffee, passes through the ground
    coffee chute. If there is too much
    ground coffee, the machine is unable to
    process it so that it can be emptied into
    the waste container, and a fault
    message appears in the display.

    ^ Push the coffee ejector of the brew
    unit into the correct position.
    ^ Set the brew unit to one side and
    replace the waste container and the
    water container in the machine.
    ^ Close the door.
    The brew unit motor will now move
    into the correct position.
    ^ When "Fit the brew unit" appears,
    open the door and replace all the
    parts in the machine.
    ^ Close the door.
    If the fault message continues to
    appear in the display, please call the
    Miele Service department, quoting the
    fault code.

    ^ Switch the machine off and then back
    on again.

    ... the message "Fault - 74" or "Fault 77" appears in the display.

    ... the message "Fault - 73" appears
    in the display.

    ^ Switch the machine off and then back
    on again.

    The brew unit cannot be positioned
    correctly.
    ^ Take the brew unit out of the machine
    and clean it thoroughly (see
    "Cleaning and care - Brew unit").

    If the fault message appears in the
    display again, contact the Miele Service
    Department.

    69



  • Page 70

    Problem solving guide
    ... the message "Check the brew
    unit" appears in the display.
    The brew unit may be dirty.
    ^ Follow the instructions in the display.
    ^ Clean the brew unit (see "Cleaning
    and care - Brew unit").
    ^ Set a medium grinder setting and a
    medium amount of coffee (see
    "Setting the coffee grinder" and
    "Settings: customising your machine Setting the amount of coffee"). Set the
    amount of coffee to medium in any
    User profiles as well.
    ... the ground coffee chute cover
    cannot be pushed in properly.
    ^ Is the lid of the ground coffee chute
    closed?
    ... it is difficult to open or close the
    door of the machine.
    ^ Align the door using the hinges (see
    "Installation - Adjusting the door
    hinges").
    ^ Lubricate the cap of the central spout
    connector with the silicone grease
    supplied.

    70



  • Page 71

    After Sales / Guarantee
    In the event of a fault which you cannot
    correct yourself, or if the appliance is
    under guarantee, please contact:
    – your Miele Dealer
    or
    – Miele (see back cover for contact
    details).
    Please note that telephone calls may
    be monitored and recorded for
    training purposes (UK only).

    When contacting your Dealer or Miele,
    please quote the model and serial
    number of your machine. These are
    shown on the data plate inside the
    machine.
    N.B. A call-out charge will be applied
    for service visits where the problem
    could have been resolved as described
    in these instructions.

    Guarantee
    For information on the appliance
    guarantee specific to your country
    please contact Miele. See back cover
    for address.
    In the U.K. your coffee machine is
    guaranteed for 2 years from the date of
    purchase. However, you must activate
    your cover by calling 0845 365 6640 or
    registering online at www.miele.co.uk.

    71



  • Page 72

    Saving energy
    AItering the following settings from the
    factory default, will increase the energy
    consumption of the coffee machine:
    – Eco mode
    – Lighting
    – Time of day display
    – Timer
    – Connection of a plate warmer
    When altering these settings, the
    message "This setting increases energy
    consumption" appears in the display.
    You can save energy by switching the
    coffee machine off at the mains when it
    is not being used for a long time.

    72



  • Page 73

    Electrical connection U.K., ZA, IRL
    All electrical work should be carried out
    by a suitably qualified and competent
    person only, in strict accordance with
    current national and local safety
    regulations (BS 7671 in the UK).
    Installation, repairs and other work by
    unqualified persons could be
    dangerous. The manufacturer cannot
    be held liable for unauthorised work.
    Ensure power is not supplied to the
    machine until after installation work has
    been carried out.
    The voltage and connected load are
    given on the data plate. Please ensure
    these match the household mains
    supply. The fuse rating is quoted on the
    plug.
    The machine is supplied with a mains
    cable with moulded plug for connection
    to a 230 - 240 V mains supply.
    Connection should be made via a fused
    plug and suitable switched socket
    which is easily accessible after
    installation.
    Do not connect via an extension lead.
    For extra safety it is advisable to protect
    the appliance with a suitable residual
    current device (RCD). Contact a
    qualified electrician for advice.

    Non-rewireable plugs BS 1363
    The fuse cover must be refitted when
    changing the fuse, and if the fuse cover
    is lost, the plug must not be used until a
    suitable replacement is obtained. The
    colour of the correct replacement cover
    is that of the coloured insert in the base
    of the plug, or the colour that is
    embossed in words on the base of the
    plug (as applicable to the design of
    plug fitted).
    Replacement fuses should be ASTA
    approved to BS 1362 and have the
    correct rating. Replacement fuses and
    fuse covers may be purchased from
    your local electrical supplier.
    Do not connect the machine to an
    inverter such as those used with an
    autonomous energy source e.g. Solar
    power.
    When switched on peak loads in the
    system can cause the safety switch off
    mechanism to be triggered. This can
    damage the electronic unit.
    The machine must not be used with
    so-called Energy saving devices
    either. These reduce the amount of
    energy supplied to the machine
    causing it to overheat.

    If the socket is not accessible after
    installation (depending on country) an
    additional means of disconnection must
    be provided for all poles.
    WARNING: THIS APPLIANCE
    MUST BE EARTHED

    73



  • Page 74

    Installation
    Building-in and combination options
    The machine is designed for installation in a tall unit.

    It can also be combined with other Miele built-in appliances. If the coffee machine
    is to be built in above another appliance, there must be a full-width, closed shelf
    between them (except when it is combined with a Miele built-in plate warming
    drawer).
    The plate warmer can be connected directly to a socket at the rear of the
    CVA 5060 coffee machine using a special connection cable (available as an
    optional accessory from your Miele Dealer or the Miele Spare Parts
    Department) so that it can be in use or ready for use whenever the CVA 5060
    coffee machine is being used. This ensures that you always have pre-warmed
    cups ready for use.
    Only a Miele EGW 4000-14 or -29 or 5000-14 plate warmer can be connected
    directly to the CVA 5060 coffee machine. Connecting any other warming
    drawer will result in damage to the appliance.
    The machine can also be installed in a mobile unit which is available to purchase.
    74



  • Page 75

    Installation
    Ventilation
    Ensure that the back of the coffee
    machine is sufficiently ventilated, so
    that steam and warm air can dissipate
    freely.
    The ventilation gaps in the furniture
    housing unit and the gap between
    the top of the housing unit and the
    ceiling must be at least 200 cm².
    Otherwise condensation can build up
    and damage the machine or the
    housing unit.
    Installation
    Before installation make sure that
    there is no power supply to the
    machine. This also applies should it
    ever need to be taken out of its
    housing unit.
    The machine must be built in before
    it is operated. It is designed for use
    in ambient temperatures ranging
    from +15 °C to +60° C.

    ^ If the housing unit niche is not fitted
    with a sealing strip you should fit a
    Miele sealing strip to the machine
    before installing it. This is fitted from
    the back of the machine.
    This sealing strip is available to order
    from Miele.
    ^ Using the large allen key, unscrew all
    four feet out by about 2 mm.
    The feet can be unscrewed by up to
    approx. 10 mm.

    You will need two allen keys (size 3
    and 5) for installing the machine.
    To align the machine front with the
    furniture front ensure that there is a
    sealing strip provided all the way
    around the building-in niche or around
    the coffee machine.

    ^ Push the machine all the way into the
    niche until there is a resistance. Then
    check the height to make sure it is
    sitting centrally in the unit and that it
    is level.

    75



  • Page 76

    Installation
    If it is not:

    Adjusting the door hinges

    ^ realign the machine by adjusting the
    four feet.

    If the machine door becomes difficult to
    open or close after installation you can
    adjust the hinges to realign it:

    The feet can be unscrewed by up to
    approx. 10 mm.
    ^ Connect the machine to the
    electricity supply.
    ^ Push it all the way into the niche until
    you feel resistance.
    ^ Open the door of the machine, and
    partially tighten the side socket
    screws.
    ^ To adjust the door in direction a,
    turn screw a.
    ^ To adjust the door forwards or
    backwards (direction b), turn screw
    b.

    ^ Carefully turn the lower socket
    screws a to centre the machine in
    the niche.
    ^ Tighten both upper socket screws b
    by hand to secure the machine in the
    unit. Do not overtighten them.

    76



  • Page 77

    77



  • Page 78

    78



  • Page 79

    79



  • Page 80

    Alteration rights reserved / 4112
    CVA 5060, CVA 5068

    M.-Nr. 09 248 830 / 01






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele CVA 5068 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Miele CVA 5068 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,71 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Miele CVA 5068

Miele CVA 5068 Bedienungsanleitung - Deutsch - 76 seiten

Miele CVA 5068 Kurzanleitung - Englisch - 8 seiten

Miele CVA 5068 Bedienungsanleitung - Holländisch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info