Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
Operating and installation instructions
Built-in coffee machine
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
M.-Nr. 09 549 661en-GB
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Hallo , mein Problem : beim Entkalken läuft Wasser nur in die Abtropfschale.
    Was kann ich machen Gerät CVA 6401
    Dánské Eingereicht am 18-3-2022 15:28

    Antworten Frage melden
  • Wenn kommt Fehler F77 was muss machen?
    Geht nicht mehr leider ganze Zeit Fehler F77 kommt Eingereicht am 1-2-2022 17:42

    Antworten Frage melden
  • Kann man den Kaffeeautomat bei Stromausfall mit einem Stromerzeuger/Inverter mit einer Nennleistung von 1,8 KW betreiben? Eingereicht am 19-1-2022 08:54

    Antworten Frage melden
  • Gerät kann nicht mehr eingeschaltet werden, nachdem das Display abgewischt wurde( nicht nass abgewischt) Eingereicht am 28-9-2020 14:26

    Antworten Frage melden
  • Wie kann ich eine längere Zeit bis zum spülen des Gerätes einstellen.
    Eingereicht am 28-2-2020 16:21

    Antworten Frage melden
    • Unter dem display befindet sich ein Symbol mit drei kleinen parallelen Strichen! Das sind die Einstellungen - antippen! "Einstellungen" antippen, dann "Timer" auswählen und mit OK bestätigen, dann "Timer1" auswählen und mit OK bestätigen, "einstellen" mit OK bestätigen, "ausschalten nach" mit OK bestätigen.
      Die dann erscheinende Anzeige von Stunden und Minuten mit den Pfeiltasten rechts vom display auf die gewünschte Zeit einstellen und mit OK bestätigen..
      Am Ende mit dem Zurückpfeil zurück zur Anzeige "Getränk wählen"
      Es ist einfacher, als es sich hier liest...
      Viel Freude noch!!! Beantwortet 28-2-2020 16:34

      Finden Sie diese Antwort hilfreich? (1) Antwort melden
  • Folgende Fehlermeldung:
    "Wassertank bis zur Verrastung einschieben."
    Das mache ich, dann
    "Spülvorgang startet"
    "Gerät wird aufgeheizt!
    Dann kommt aber erneut die erste Meldung "Wassertank bis zur Verrastung einschieben" und alles beginnt von vorne...
    HILFE!!! Eingereicht am 10-1-2020 16:50

    Antworten Frage melden
  • Der Mahlgrad läßt sich nicht mehr verstellen. Man kann den Schieberegler ganz leicht hin- und herschieben. Was muß ich tun ? Eingereicht am 10-10-2017 20:14

    Antworten Frage melden
  • Mahlgrad verändert sich nicht. Hebel leicht zu verschieben Eingereicht am 10-10-2017 19:56

    Antworten Frage melden
  • Es kommt Zuviel Kaffee. Wie kann ich die Maschine einstellen, damit es programmiert ist? Eingereicht am 20-3-2017 06:59

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    Operating and installation instructions
    Built-in coffee machine

    To avoid the risk of accidents or damage to the machine, it is essential
    to read these instructions before it is installed and used for the first time.

    en - GB

    M.-Nr. 09 549 661



  • Page 2

    Caring for the environment
    Disposal of the packing
    material
    The packaging is designed to protect
    the appliance from damage during
    transportation. The packaging materials
    used are selected from materials which
    are environmentally friendly for disposal
    and should be recycled.
    Recycling the packaging reduces the
    use of raw materials in the
    manufacturing process and also
    reduces the amount of waste in landfill
    sites.

    Disposal of your old machine
    Electrical and electronic machines
    often contain valuable materials. They
    also contain materials which, if handled
    or disposed of incorrectly, could be
    potentially hazardous to human health
    and to the environment. They are,
    however, essential for the correct
    functioning of your machine. Please do
    not therefore dispose of it with your
    household waste.

    Please dispose of it at your local
    community waste collection/recycling
    centre, or contact your Dealer for
    advice. Ensure that it presents no
    danger to children while being stored
    for disposal.

    2



  • Page 3

    Contents
    Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
    Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Display and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    Using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Switching on for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
    Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
    Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Switching the coffee machine on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
    Adjusting the central spout to the correct cup height . . . . . . . . . . . . . . . . . . . 24
    Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Espresso, Coffee or Long coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Making two portions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
    Dispensing several cups of coffee one after the other (Coffee pot) . . . . . . . . . . . 26
    Making espresso and coffee using ready ground coffee . . . . . . . . . . . . . . . . . . . 26
    Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Making drinks with milk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Dispensing hot water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Making drinks using a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    After making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Coffee the way you like it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
    Grinder setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
    Displaying and altering the parameters for a drink . . . . . . . . . . . . . . . . . . . . . . . . 31
    Amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    Brewing temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    Pre-brewing the coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Setting the portion size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Setting the portion size when making a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Calling up portion sizes from the menu "Parameter" , . . . . . . . . . . . . . . . . . . . . . 35
    Setting the portion sizes for different profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    3



  • Page 4

    Contents
    Setting up profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Calling up a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Creating a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Selecting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Changing the name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Deleting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Changing a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Calling up the "Settings" menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Changing and saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Possible setting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    Info (Display information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Locking the coffee machine (System lock 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Setting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Demo mode (Showroom programme) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

    4



  • Page 5

    Contents
    Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Rinsing the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Milk flask and lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
    Central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
    Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
    Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
    Interior and machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
    Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
    Removing the brew unit and washing by hand . . . . . . . . . . . . . . . . . . . . . . . . 57
    Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
    Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
    Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
    Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
    Cleaning blockages from the milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
    After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
    Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
    Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
    Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
    Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
    Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
    Adjusting the hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
    Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

    5



  • Page 6

    Guide to the machine
    Exterior view

    a On/Off sensor K
    b Controls and display
    c Handle
    d Hot water spout
    e Drip tray cover
    f Height-adjustable central spout with lighting
    g Milk flask and lid

    6



  • Page 7

    Guide to the machine
    Interior view

    h Ground coffee chute cover
    i Brew unit
    j Ground coffee chute
    k Slide control to select fineness of ground coffee
    l Coffee bean container
    m Water container with inlet device
    n Drip tray with grid
    o Waste container
    p Drip catcher
    q Central spout connector
    r Maintenance panel

    7



  • Page 8

    Guide to the machine

    Display and controls
    a On/Off sensor K

    For switching the coffee machine on and off

    b Drinks sensors

    For dispensing
    . Espresso
    / Coffee
    H Cappuccino
    k Latte macchiato

    c Further programmes x Other drinks such as Long coffee, Caffè latte, hot
    milk, milk froth and hot water
    Maintenance menu
    d Display

    Shows information about the current action or status

    e Back #

    For returning to the previous menu, cancelling
    unwanted actions

    f Arrow sensors Y X

    For displaying further options and highlighting a
    selection

    g OK sensor

    For confirming display messages and saving
    settings

    h Profiles {

    For saving and editing profiles

    i Settings X

    For altering settings, displaying information or
    checking which settings are currently active

    j Two portions °

    For making two portions of a drink

    k Parameters ,

    Settings for checking or altering coffee preparation

    l Optical interface

    (for service technician use only)

    8



  • Page 9

    Accessories
    Accessories supplied

    Optional accessories

    – Measuring spoon
    for ready ground coffee

    Miele accessories and cleaning and
    conditioning products are available for
    your coffee machine.

    – Milk flask with lid
    for storing and heating/frothing milk
    – Milk pipework cleaner
    for cleaning the milk system
    (Starter set)
    – 2 containers (large and small)
    for cleaning and maintenance
    – Descaling tablets
    for descaling the water pipework
    (Starter set)
    – Cleaning tablets
    for degreasing the brew unit
    (Starter set)
    – Test strips
    for determining the water hardness
    level
    – Cleaning brush
    for cleaning the milk pipework

    – Microfibre cloth
    for removing finger marks and light
    soiling
    – Milk flask with lid
    for storing and heating/frothing milk
    – Small lid
    for storing the milk flask in the fridge
    – Milk pipework cleaner
    for cleaning the milk system
    – Descaling tablets
    for descaling the water pipework
    – Cleaning tablets
    for degreasing the brew unit
    – Silcone grease
    for lubricating the cap on the central
    spout connector

    – Silcone grease
    for lubricating the cap on the central
    spout connector
    – Central spout connector cap
    – Angled connector for milk
    pipework
    Replacement part

    These products and other useful
    accessories can be ordered via the
    internet, from Miele (see back cover for
    contact details) or from your Miele
    dealer.
    9



  • Page 10

    Warning and Safety instructions
    This coffee machine complies with current safety requirements.
    Improper use can, however, present a risk of both personal injury
    and material damage.
    To avoid the risk of accidents and damage to the machine,
    please read these instructions carefully before using it for the first
    time. They contain important notes on installation, safety, use and
    maintenance.
    Miele cannot be held liable for damage caused by noncompliance with these instructions.
    Keep these instructions in a safe place and pass them on to any
    future owner.

    Correct application

    ~ This coffee machine is intended for use in domestic households
    and similar working and residential environments.
    Examples of a working or residential environment include
    – shops, offices and other working environments,
    – small businesses, showrooms etc.,
    – where the coffee machine is being used by customers in hotels,
    motels, bed and breakfast and other similar establishments.

    ~ This coffee machine is not intended for outdoor use.
    ~ It must only be used as a domestic appliance to make espresso,
    cappuccino, latte macchiato etc.
    Any other use is not permitted.

    ~ This coffee machine can only be used by people with reduced

    physical, sensory or mental capabilities, or lack of experience and
    knowledge, if they are supervised whilst using it, or have been
    shown how to use it in a safe way and recognise and understand the
    consequences of incorrect operation.

    10



  • Page 11

    Warning and Safety instructions
    Safety with children

    , There is a danger of burning and scalding from the coffee

    and hot water dispensing spouts.
    Children's skin is far more sensitive to high temperatures than that
    of adults.
    Ensure children do not touch hot surfaces of the coffee machine
    or place any part of their body under the dispensing spouts.

    ~ Install the coffee machine where it is out of the reach of children.
    ~ Children under 8 years of age must be kept away from the
    machine unless they are constantly supervised.

    ~ Children 8 years and older may only use the machine

    unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.

    ~ Children must not be allowed to clean the coffee machine
    unsupervised.

    ~ Please supervise children in the vicinity of the coffee machine
    and do not allow them to play with it.
    Remember that coffee and espresso are not suitable drinks for
    children.

    ~ Danger of suffocation. Packaging, e.g. plastic wrappings, must

    be kept out of the reach of babies and children. Whilst playing,
    children could become entangled in packaging or pull it over their
    head and suffocate.

    11



  • Page 12

    Warning and Safety instructions
    Technical safety

    ~ Installation and repairs may only be carried out by a Miele

    authorised service technician. Installation, repairs and other work by
    unqualified persons can cause considerable danger to users.

    ~ A damaged coffee machine could be dangerous. Before building
    in the machine, check it for any externally visible damage. Do not
    use a damaged machine.

    ~ To avoid the risk of damage to the machine, make sure the

    connection data (voltage and frequency) on the data plate
    corresponds to the household supply, before connecting the
    machine to the mains supply. Consult a qualified electrician if in any
    doubt.

    ~ The electrical safety of this coffee machine can only be

    guaranteed when correctly earthed. It is essential that this standard
    safety requirement is met. If in any doubt please have the electrical
    installation tested by a qualified electrician.

    ~ Do not connect the machine to the mains electricity supply by a
    multi-socket adapter or an extension lead. These are a fire hazard
    and do not guarantee the required safety of the appliance.

    ~ For safety reasons, this machine may only be used when it has
    been built in.

    ~ If the coffee machine is to be built in above another appliance,

    there must be a full-width, closed shelf between them (except when
    it is combined with a Miele built-in plate warming drawer).

    ~ The coffee machine must not be used in a non-stationary location
    (e.g. on a ship).

    12



  • Page 13

    Warning and Safety instructions

    ~ Only use the coffee machine in rooms where the ambient
    temperature is between +10 °C and +38 °C.

    ~ Ensure that there is sufficient ventilation around the coffee

    machine. The ventilation gaps in the furniture housing unit and the
    gap between the top of the housing unit and the ceiling must be at
    least 200 cm2. Otherwise condensation can build up and damage
    the machine or the housing unit.

    ~ If the coffee machine is installed behind a kitchen furniture door,
    it may only be used with the furniture door open. Do not close the
    furniture door while the coffee machine is in use.

    ~ While the machine is under guarantee, repairs should only be

    undertaken by a Miele authorised service technician. Otherwise the
    guarantee is invalidated.

    ~ Faulty components must only be replaced by genuine Miele
    Original spare parts. The manufacturer can only guarantee the
    safety of the machine when Miele replacement parts are used.

    ~ The machine must be disconnected from the electricity supply
    during repair work.

    ~

    Never open the outer casing of the machine. Tampering with
    electrical connections or components and mechanical parts is
    highly dangerous to the user and can cause operational faults or
    electric shock.

    ~ Only use genuine original Miele accessories with this machine.
    Using spare parts or accessories from other manufacturers will
    invalidate the guarantee, and Miele cannot accept liability.

    13



  • Page 14

    Warning and Safety instructions
    Correct use

    , The central spout and hot water spout present a danger of

    burning or scalding.
    The liquids and steam dispensed are very hot.
    Water in the drip tray can also be very hot. Take great care when
    emptying it.
    Do not place any part of your body under the spouts when hot
    liquid or steam are being dispensed.
    Do not touch hot components.
    The nozzles can spray hot liquid or steam. Make sure that the
    central spout is clean and fitted correctly.

    , Never look directly at the lighting or use optical instruments to
    look at it.
    ~ Please note the following regarding water:

    – Only use cold, fresh tap water to fill the water container. Hot water
    and other liquids could damage the machine.
    – Change the water every day to prevent a build-up of bacteria.
    – Do not use mineral water. Mineral water will cause serious
    limescale deposits to build up in your machine and damage it.
    – Do not use water from a reverse osmosis unit in this machine. This
    would damage it.

    ~ Only fill the bean container with roasted espresso/coffee beans.
    Do not fill the bean container with coffee beans which have been
    treated with additives or with ground coffee.

    14



  • Page 15

    Warning and Safety instructions

    ~ Do not use green (unroasted) coffee beans or mixtures of coffee

    beans which contain green coffee beans. Green coffee beans are
    very hard and still contain a certain amount of residual moisture.
    These can damage the coffee machine grinder as soon as grinding
    begins.

    ~ Sugar will damage the machine. Only use pure coffee beans. Do
    not use coffee beans which have been treated with anything
    containing caramel, any kind of sugar or other substances. Do not
    put liquids containing sugar in the coffee machine.

    ~ Only add ground coffee or the Miele cleaning tablets for
    degreasing the brew unit to the ground coffee chute.

    ~ Do not use any caramelised ready ground coffee. The sugar in

    the coffee will stick to and block the brew unit of the coffee machine.
    The cleaning tablets for degreasing the brew unit will not remove
    this type of deposit.

    ~ Do not use milk with additives. Most additives contain sugar
    which will stick to the milk pipework and damage the machine.

    ~ If using dairy milk make sure that it has been pasteurised.
    ~ Do not place any alcohol mixtures which are alight underneath

    the central spout. The flames could ignite plastic components and
    cause them to melt.

    ~ Do not swing from or hang anything on the machine front when it
    is open as this could damage the machine.

    ~ The machine must not be used for cleaning objects.
    ~ The central spout connector cap is lubricated with silicone

    grease. Take care not to get this on your clothes when removing or
    replacing the containers or other components.

    15



  • Page 16

    Warning and Safety instructions
    Cleaning and care

    ~ The coffee machine must be disconnected from the electricity
    supply before cleaning or maintenance.

    ~ Clean the coffee machine and the milk flask thoroughly before
    using for the first time (see "Cleaning and care").

    ~ Clean the coffee machine and the milk flask every day (see
    "Cleaning and care").

    ~ Do not use a steam cleaner to clean this machine. Steam could
    reach electrical components and cause a short circuit.

    ~ Descale the coffee machine regularly depending on the water

    hardness level in your area. Descale the machine more frequently in
    areas with very hard water. Miele cannot be held liable for damage
    arising from insufficient descaling, the use of incorrect descaling
    agent or the use of descaling agent which is not of the appropriate
    concentration.

    ~ Degrease the brew unit regularly with Miele cleaning tablets.

    Depending on the natural oil content of the coffee used, the brew
    unit can become blocked quite quickly.

    For machines with stainless steel surfaces:

    ~ Do not use sticky notes, transparent adhesive tape, masking tape
    or other types of adhesive on stainless steel surfaces. These
    damage the surface, causing it to lose its dirt repellent protective
    coating.

    ~ The finish on stainless steel surfaces is susceptible to scratching.
    Even magnets can cause scratching.

    16



  • Page 17

    Using for the first time
    Selecting the language
    Please read the operating
    instructions and take the time to
    familiarise yourself with the coffee
    machine before using it for the first
    time.

    Before using for the first time
    ^ The machine must be correctly
    installed and connected (see
    "Electrical connection" and
    "Installation") before it is used for the
    first time.
    ^ Remove any protective foil.
    Clean the coffee machine
    thoroughly (see "Cleaning and
    Care") before filling it with water and
    coffee beans.

    Switching on for the first time
    When you switch the coffee machine on
    for the first time, after the welcome
    screen has appeared you will be
    prompted to set the following:

    ^ Touch the arrow sensors until the
    language you want is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until the
    country you want is highlighted.
    Touch the OK sensor.
    The setting is now saved.
    Setting the date
    ^ Touch the arrow sensors until the
    current year appears. Touch the OK
    sensor.
    ^ Repeat this for "Month" and "Day",
    until the current date has been set.
    The setting is now saved.
    Setting the Time of day
    ^ Touch the arrow sensors until the
    current time appears. Touch the OK
    sensor.
    The setting is now saved.

    – Language
    – Date
    – Time
    – Display (Time of day display)
    ^ Touch the On/Off sensor K.
    The welcome message "Miele Willkommen" will appear in the display
    briefly.

    17



  • Page 18

    Using for the first time
    Display

    Water hardness

    You can choose from the following
    options:

    The water hardness level indicates how
    much calcium is dissolved in the water.
    The higher the calcium content, the
    harder the water, and the harder the
    water, the more often the coffee
    machine will need to be descaled.

    – On: the display will always show the
    date and time (even when the
    machine is switched off).
    – Off: the display is dark when the
    machine is switched off.
    – Night dimming: the date and time
    are only displayed between the
    hours of 5:00 and 23:00.
    ^ Touch the arrow sensors until the
    option you want is highlighted.
    Touch the OK sensor.
    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.
    "Set-up successfully completed" will
    appear in the display.
    "Fill and replace the water container"
    will appear in the display.
    ^ Fill the water container with fresh,
    cold tap water.
    Tip: Please continue to work though the
    further steps outlined in the operating
    instructions so that you can familiarise
    yourself with the coffee machine and
    set it up for your specific requirements.

    The coffee machine measures the
    quantity of water and steam used. The
    number of drinks which can be
    dispensed before the machine needs to
    be descaled will depend on the water
    hardness level set.
    Set the water hardness level on the
    coffee machine to the water hardness
    level for the local area to ensure that
    the machine functions correctly and is
    not damaged. This will ensure that the
    reminder to descale the machine will
    appear in the display at the correct
    time.
    The machine has four programmable
    levels:
    Water hardness

    Local water
    hardness
    level

    Setting
    (Hardness
    level)

    0 - 8.4 °dH
    (0 -1.5 mmol/l)

    Soft

    Soft 1

    8.4 - 14 °dH
    (1.5 - 2.5 mmol/l)

    Medium

    Medium 2

    14 - 21 °dH
    (2.5 - 3.7 mmol/l)

    Hard

    Hard 3

    more than 21 °dH Hard
    (more than
    3.7 mmol/l)

    18

    Very hard 4



  • Page 19

    Using for the first time
    Checking the water hardness level
    You can use the test strip supplied to
    check the water hardness level, or your
    local water supplier will be able to
    advise you on the hardness of the water
    in your area.

    ^ Dip the test strip in your drinking
    water for a second, then shake off
    any excess water. The result will be
    evident after about a minute.
    You can now set the water hardness
    level for the coffee machine.
    Setting the water hardness level
    ^ Touch X.
    ^ Touch the arrow sensors until "Water
    hardness" is highlighted. Touch the
    OK sensor.
    ^ Touch the arrow sensors until the
    hardness level you want is
    highlighted. Touch the OK sensor.
    The setting is now saved.

    19



  • Page 20

    Operation
    The coffee machine is operated by
    touching the sensors.
    You are in the drinks menu when the
    display shows:

    To select an option, touch the X and Y
    arrow sensors to highlight the option
    you want.
    Touch the OK sensor to confirm your
    selection.

    { Miele
    Select drink

    To make a drink, touch one of the
    drinks sensors
    Other drinks are available in the
    "Further programmes" x menu.

    Calling up and navigating in a
    menu
    To call up a menu, touch the relevant
    sensor. You will be able to start actions
    or alter settings in the selected menu.

    Settings
    Language F
    Time of day
    Timer
    A scroll bar on the right hand side of
    the display indicates more options or
    text. These can be displayed using the
    arrow sensors.
    The setting which is currently selected
    will have a tick ( beside it.

    20

    Exiting a menu or cancelling
    an action
    Touch # to exit the current menu.
    If none of the sensors has been
    touched for a while, the coffee machine
    will revert to the drinks menu.



  • Page 21

    Filling the water container
    ,Bacteria can cause infection.
    It is important to empty and fill the
    container with fresh tap water every
    day to avoid the risk of bacteria
    building up.
    Only use fresh, cold tap water.
    Hot or warm water or other liquids
    could damage the coffee machine.

    ^ Open the front of the coffee machine.

    Do not use mineral water. Mineral
    water will cause serious limescale
    deposits to build up in your machine
    and damage it.

    ^ Pull the water container forwards to
    remove it.
    ^ Take off the lid and fill the water
    container with fresh, cold tap water
    up to the "max." mark.
    ^ Push the water container into the
    machine until it clicks into place.
    If the water container protrudes
    slightly or is a little high, check
    whether the surface that the water
    container sits on is dirty. If the water
    container is not positioned correctly,
    the outlet valve will not connect
    properly and could leak. Clean the
    surface, if necessary.
    21



  • Page 22

    Filling the coffee bean container
    If you want to use freshly ground coffee
    beans for each cup of espresso or
    coffee, fill the coffee bean container
    with roasted coffee beans.
    Alternatively, you can make coffee or
    espresso with ready ground coffee (see
    "Making espresso and coffee using
    ready ground coffee").
    Warning.
    Only put roasted espresso/coffee
    beans in the container.
    Anything else, including ground
    coffee, will damage the grinder.

    Warning. Sugar will damage the
    coffee machine.
    Do not use coffee beans that have
    been treated with sugar, caramel or
    other substances and do not put
    liquids containing sugar into the
    coffee bean container.
    Do not use green (unroasted) coffee
    beans or mixtures of coffee beans
    containing green coffee beans.
    Green coffee beans are very hard
    and still contain a certain amount of
    residual moisture. These can
    damage the coffee machine grinder
    as soon as grinding begins.

    22

    Tip: You can use a nut or seed grinder
    to grind green coffee beans. These
    types of grinder generally have a
    rotating stainless steel blade.
    You can then add the ground green
    coffee one portion at a time to the
    ground coffee chute and make the
    desired coffee drink (see "Making
    espresso and coffee using ready
    ground coffee").

    ^ Pull out the coffee bean container.
    ^ Push back the lid and fill the
    container with roasted coffee beans.
    ^ Slide the lid back into place.
    ^ Push the coffee bean container fully
    back into the coffee machine. Close
    the front.



  • Page 23

    Switching the coffee machine on and off
    Switching on

    Switching off

    When the machine is switched on it
    heats up and rinses out the pipework.
    This cleans and heats the pipework in
    preparation for making coffee.

    ^ Touch the On/Off sensor K.

    If the coffee machine still has an
    operating temperature higher than
    60 °C, then rinsing will not take
    place.
    ^ Touch the On/Off sensor K.
    Tip: If you do not want the water from
    the rinsing process to flow into the drip
    tray, place a suitable container, e.g. the
    small container supplied, underneath
    the central spout before making the first
    coffee of the day.

    If coffee has been dispensed, the
    coffee machine will rinse the coffee
    pipework automatically before
    switching off.

    Switching off for longer
    periods of time
    If the machine is not going to be used
    for a longer period of time, e.g. whilst
    on holiday:
    ^ Empty the drip tray, the waste
    container and the water container.

    After the appliance has heated up, the
    pipework will be rinsed. Hot water will
    be dispensed from the central spout.
    You can now make drinks.

    ^ Clean all components thoroughly,
    including the brew unit, the central
    spout connector and the drip catcher
    in the machine front.
    ^ Switch off the machine.
    If you are leaving the front open while
    the coffee machine is not in being
    used for a long time, disconnect it
    from the mains to save energy.

    23



  • Page 24

    Adjusting the central spout to the correct cup height
    You can adjust the central spout to suit
    the height of the cup you are using so
    that the coffee or espresso will not cool
    down as quickly and the crema will
    have a better consistency.

    ^ Pull the central spout down to the
    same level as the rim of the cup.
    or
    ^ Push the spout up until there is
    enough room to fit the cup or mug
    underneath.

    24



  • Page 25

    Making drinks
    Espresso, Coffee or Long
    coffee

    Making two portions
    You can dispense two portions of
    espresso or coffee at once into one cup
    or into two separate cups
    simultaneously.
    To dispense two cups of coffee or
    espresso at the same time:

    ^ Place a cup under the central spout.
    ^ Touch the sensor for the drink you
    want.
    .

    Espresso

    /

    Coffee

    ^ Place a cup under each of the coffee
    dispensers in the central spout.

    x

    in "Further programmes": Long
    coffee

    ^ Touch °.

    The coffee or espresso will be
    dispensed from the central spout into
    the cup.
    To ensure that any coffee residues
    from the factory testing process are
    removed from the brewing system,
    please throw away the first two cups
    of coffee when using the coffee
    machine for the first time.

    The ° sensor will now light up.
    ^ Touch the sensor for the drink you
    want.
    Two portions of the desired drink will be
    dispensed from the central spout.
    Tip: After a while, if a drink is not
    selected "Two portions" ° will
    disappear from the display.

    25



  • Page 26

    Making drinks
    Cancelling preparation
    Drink preparation can be cancelled
    while "Stop" is showing in the display.
    ^ Touch the OK sensor.
    Preparation will be cancelled.
    When making two portions at once
    touching the OK sensor once will
    stop the 1st drink. Touching it for
    longer will stop both drinks.

    Dispensing several cups of
    coffee one after the other
    (Coffee pot)
    You can make several cups of coffee
    one after the other automatically with
    the "Coffee pot" function (max. 1 litre).
    Up to eight cups can be made at once.
    ^ Place a suitable container
    underneath the central spout.
    ^ Touch x.
    ^ Touch the arrow sensors until "Coffee
    pot" is highlighted. Touch the OK
    sensor.
    ^ Touch the arrow sensors until the
    number of cups you want (3 to 8) is
    highlighted. Touch the OK sensor.
    ^ Follow the instructions in the display.
    The coffee for each cup is individually
    ground, brewed and dispensed. Each
    stage of the process is shown in the
    display.

    26

    You can interrupt the process at any
    time, by
    ^ touching the OK sensor or x .
    You can use the "Coffee pot" function
    twice in succession. After this the
    coffee machine will need to cool
    down for an hour in order to avoid it
    being damaged.

    Making espresso and coffee
    using ready ground coffee
    To make espresso or coffee using
    ready ground coffee, add a portion of
    ground coffee to the ground coffee
    chute.
    This gives you the option of making a
    cup of decaffinated coffee, for
    example, even though the coffee bean
    container is filled with roasted coffee
    beans.
    The coffee machine will automatically
    recognise that ready ground coffee has
    been added to the ground coffee
    chute.
    Only one portion can be made at a time
    when using ready ground coffee.



  • Page 27

    Making drinks
    Adding ready ground coffee
    Use the coffee spoon supplied.
    Do not add more than one level
    spoon of ground coffee to the coffee
    chute. If too much is added, the
    brew unit will not be able to process
    the coffee.

    The coffee machine will use all the
    ground coffee which has been added
    to the chute to make the next coffee.
    ^ Open the front of the coffee machine.

    "Use ground coffee?" will appear in the
    display.
    Making espresso and coffee using
    ready ground coffee
    If you want to use ready ground coffee
    to make the drink:
    ^ Touch the arrow sensors until "Yes" is
    highlighted in the display. Touch the
    OK sensor.
    You can now select whether you want
    to dispense a coffee or an espresso
    made with ground coffee.
    ^ Place a cup under the central spout.
    ^ Touch the sensor for the drink you
    want.
    This will now be dispensed.
    If you do not want to use ready ground
    coffee to make the drink:
    ^ Touch the arrow sensors until "No" is
    highlighted. Touch the OK sensor.
    The ground coffee will be directed into
    the waste container.

    ^ Remove the cover of the ground
    coffee chute. Open the lid of the
    chute.
    ^ Add one level spoon of ready ground
    coffee.

    If no drink is selected within
    approx. 15 seconds, the ground
    coffee will be directed into the waste
    container.

    ^ Close the lid. Push the cover into the
    machine. Close the front.

    27



  • Page 28

    Making drinks
    Drinks with milk
    You can use milk to make different
    coffee specialities, hot milk or milk
    froth.
    The following can be made:
    Cappuccino: consists of two thirds milk
    froth and a third espresso.
    Latte macchiato: consists of a third hot
    milk, milk froth and espresso.
    Caffè latte: consists of hot milk and
    coffee.

    a lid

    Milk flask

    c milk suction tube

    The milk will not keep cool in the milk
    flask. It should therefore be kept in
    the fridge if you are not going to be
    using milk for a long period. Cold
    milk (below 13° C) gives the best
    results for milk froth.

    Do not use milk with additives.
    Sugar additives will stick to the milk
    pipework.

    b sensor
    d glass flask
    ^ Fill the flask with milk up to a
    maximum of 2 cm below the rim.
    Close the flask with the lid.
    It is important to keep the opening
    and the neck of the flask clean
    (whilst filling it and carrying it). If the
    flask is dirty it may not work
    properly.

    ^ Push the milk flask fully back into the
    machine.

    28



  • Page 29

    Making drinks
    Making drinks with milk

    Making drinks using a profile

    ^ Place a suitable container
    underneath the central spout.

    If you have set the machine up for a
    specific user profile you can select this
    before you make a drink.

    ^ Touch the sensor for the drink you
    want.
    H

    Cappuccino

    k

    Latte macchiato:

    x

    in "Further programmes":
    Caffè latte, milk froth or hot
    milk

    ^ Touch {.
    ^ Touch "Select profile".
    ^ Touch the arrow sensors until the
    profile you want is highlighted.
    Touch the OK sensor.
    The profile name will appear in the
    display to show that a profile has been
    selected.

    The coffee selected will be dispensed.

    You can now make the drink you want.

    Dispensing hot water

    After making drinks

    ,Danger of burning and scalding
    on the hot water spout. The water
    dispensed is very hot.

    If you have made a drink with milk, the
    following message appears in the
    display after a while "Start rinse cycle"
    ^ Touch the OK sensor.

    Please note that the water dispensed
    is not hot enough for making tea.
    ^ Place a suitable container
    underneath the hot water spout.
    ^ Touch x.

    The milk pipework will now be rinsed
    through.
    Even if you do not confirm the
    message with "OK", the coffee
    machine will rinse the milk pipework
    after a few minutes automatically.

    ^ Touch the arrow sensors until "Hot
    water" is highlighted. Touch the OK
    sensor.
    Hot water is dispensed into the
    container under the spout.
    To cancel preparation:
    ^ touch the OK sensor.
    Preparation will be cancelled.

    29



  • Page 30

    Coffee the way you like it
    To set the coffee machine for the type
    of coffee you are using, you can
    change the amount of coffee, set the
    brewing temperature or switch on the
    "Pre-brewing option in the "Parameters"
    , menu. This can be done for each
    type of drink.
    You can also adjust the grinder setting
    to suit the type of coffee you are using.

    Grinder setting

    To avoid damaging the grinder:
    Only ever adjust the grinder by one
    setting at a time.
    Grind the coffee beans again if you
    want to adjust the grinder to the next
    setting.
    ^ Open the front of the coffee machine.

    When the beans are ground correctly,
    the coffee or espresso will flow evenly
    into the cup with a good crema.
    The crema should have an even nutbrown colour.
    There are various ways to tell whether
    the coffee grinder is set correctly.
    The coffee is too coarsely ground, if
    – espresso or coffee flows into the cup
    very quickly.

    Set a finer grinder setting.

    ^ Push the slide control one setting to
    the left (for finer grinding) or one
    setting to the right (for coarser
    grinding).

    The coffee is too finely ground, if

    ^ Close the front.

    – espresso or coffee only trickles into
    the cup.

    ^ Make a coffee.

    – the crema is very pale and uneven.

    – the crema is dark brown.
    Set a coarser grinder setting.

    30

    Then move the slide control again.
    The altered grinder setting will not be
    used until after the second coffee has
    been dispensed.



  • Page 31

    Coffee the way you like it
    Displaying and altering the
    parameters for a drink
    ^ Touch ,.
    The , sensor will now light up.
    ^ Touch the arrow sensors until the
    drink you want is highlighted. Touch
    the OK sensor.
    The current settings for the amount of
    coffee, brewing temperature and prebrewing option for that particular drink
    will be displayed.

    ^ Touch the arrow sensors until
    "Amount of coffee" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors to alter the
    amount of coffee.
    Touch the OK sensor.
    The setting is now saved.

    Brewing temperature
    The ideal brewing temperature will
    depend on
    – the type of coffee,

    Amount of coffee
    The coffee machine can grind and
    brew 6-14 g of coffee per cup. The
    greater the quantity, the stronger the
    coffee or espresso.
    There are various ways to tell whether
    the amount of coffee is set correctly.
    The amount of coffee is too low, if
    – espresso or coffee flows into the cup
    very quickly.
    – the crema is very pale and uneven.
    – the espresso or coffee lacks body.
    Increase the amount of coffee so that
    more ground coffee is brewed.
    The amount of coffee is too high, if

    – whether an espresso or a coffee is
    being made, and
    – the altitude of the region.
    If the coffee machine is located at more
    than 2000 metres above sea level, the
    brewing temperature needs to be set
    lower due to the change in pressure.
    This is because the boiling point for
    water at a high altitude is lower than the
    boiling point for water at sea level.
    There are five brewing temperatures.
    Tip: Not all types of coffee can
    withstand a high temperature. Certain
    types are too delicate - the crema on
    top would not be as good and the taste
    would be impaired.

    – espresso or coffee only trickles into
    the cup.
    – the crema is dark brown.
    – the espresso or coffee tastes bitter.
    Decrease the amount of coffee so that
    less ground coffee is brewed.

    31



  • Page 32

    Coffee the way you like it
    ^ Touch the arrow sensors until "Brew
    temperature" is highlighted. Touch
    the OK sensor.
    The brew temperature setting which is
    currently selected will have a tick (
    beside it.
    ^ Touch the arrow sensors until the
    temperature you want is highlighted.
    Touch the OK sensor.
    The setting is now saved.

    Pre-brewing the coffee
    When the Pre-brewing function is
    switched on, the freshly ground coffee
    is first moistened with a little hot water.
    Then the remaining water is forced
    through the moistened coffee at high
    pressure. This helps release the flavour
    of the coffee.
    You can select a normal or extra long
    Pre-brewing, or deselect "Pre-brewing"
    altogether.
    The machine is delivered with "Prebrewing" switched off.
    ^ Touch the arrow sensors until "Prebrewing" is highlighted. Touch the
    OK sensor.
    The Pre-brewing option which is
    currently selected will have a tick (
    beside it.
    ^ Touch the arrow sensors until the
    setting you want is highlighted.
    Touch the OK sensor.
    The setting is now saved.

    32



  • Page 33

    Setting the portion size
    The flavour of the coffee produced
    depends on the type of coffee, how
    finely the beans are ground and the
    quantity of water used.
    You can programme the amount of
    water used for espresso, coffee or hot
    water to suit the size of your cups and
    the type of coffee you are using.
    For coffee made with milk, in addition to
    programming the portion size of coffee
    you can programme the amount of milk
    and milk froth used. You can also
    programme the portion size for hot milk
    and froth.
    There is a maximum amount which can
    be programmed for each type of drink.
    Preparation stops when this is reached.
    The maximum amount possible for that
    type of drink will then be saved.

    Setting the portion size when
    making a drink
    Setting the portion size for
    Espresso ., Coffee / and Long
    coffee /
    ^ Place the desired cup under the
    central spout.
    ^ Touch ., / or / until "Change"
    appears in the display.
    The required drink will be prepared and
    "Save" will appear in the display.
    ^ Touch the OK sensor when the cup
    has been filled to the level you want.
    The portion size you have saved will
    now be dispensed every time that
    particular drink is selected.

    The changed portion size is always
    saved in the current profile. The
    name of the current profile is shown
    in the top left of the display.
    There are two ways of programming the
    portion size. Either:
    – with the drinks sensors while making
    a coffee, or
    – by selecting "Portion size" in the
    "Parameters" , menu.
    Tip: You can cancel the portion size
    programming as long as "Stop" is
    visible in the display.
    If there is insufficient water in the
    water container, the process for
    programming the amount will be
    stopped and the amount will not be
    saved.
    33



  • Page 34

    Setting the portion size
    Setting the portion size for
    Cappuccino and Latte macchiato

    Setting the portion size for Caffè
    latte, hot milk and milk froth

    ^ Place a suitable container
    underneath the central spout.

    ^ Place a suitable container
    underneath the central spout.

    ^ Touch H or k until "Portion size"
    appears in the display.

    ^ Touch ,.

    The ingredients of the drink are now
    displayed and their respective
    quantities can be altered.
    Cappuccino: milk froth, espresso
    Latte macchiato: hot milk, milk froth,
    espresso
    ^ Using the arrow sensors select all the
    ingredients for which you wish to alter
    the portion size. Confirm these
    individually by touching the OK
    sensor.
    You can see from the tick ( next to the
    relevant ingredient that the portion size
    can be set.
    ^ Touch the arrow sensors until "Start"
    is highlighted in the display.
    Touch the OK sensor.
    The coffee machine starts making the
    drink. You can now programme the
    portion size for each selected
    ingredient as soon as Save appears in
    the display.
    ^ Press the OK sensor when the cup
    has been filled to the level you want.
    ^ Save the portion size required for the
    selected ingredients.
    The programmed mix of ingredients
    and portion sizes will now be
    dispensed every time that particular
    drink is selected.
    34

    ^ Touch the arrow sensors until the
    drink you want is highlighted.
    ^ Touch the arrow sensors until "Portion
    size" is highlighted in the display.
    Touch the OK sensor.
    For caffè latte the portion sizes for the
    individual ingredients – hot milk, coffee
    – can be changed as described in
    "Setting the portion size for Cappuccino
    and Latte macchiato".
    For milk froth and hot milk, proceed
    as described in "Setting the portion size
    for Espresso ., Coffee / and Long
    coffee /



  • Page 35

    Setting the portion size
    Calling up portion sizes from
    the menu "Parameter" ,

    Setting the portion sizes for
    different profiles

    ^ Touch ,.

    You can set the portion sizes for the
    individual drinks in each profile

    ^ Touch the arrow sensors until the
    drink you want is highlighted. Touch
    the OK sensor.
    ^ Touch the arrow sensors until "Portion
    size" is highlighted in the display.
    Touch the OK sensor.
    Now proceed to set the portion size as
    described under "Setting the portion
    size when making a drink"

    ^ Touch {.
    ^ Select the profile you want.
    The name of the current profile is
    shown in the top left of the display.
    Now you can proceed as described
    above, either by selecting "Portion size"
    in the "Parameters" , menu, or by
    setting the portion size while making a
    drink.

    35



  • Page 36

    Setting up profiles
    You can enter individual profiles to
    cater for different tastes and
    preferences. For each individual profile
    you can select the portion sizes for
    each drink (see "Setting the portion
    size").
    The name of the current profile is
    shown in the top left of the display.

    Calling up a profile
    ^ Touch {.
    The { sensor will now light up.

    Creating a profile
    ^ Touch the arrow sensors until "Create
    profile" is highlighted in the display.
    Touch the OK sensor.
    Letters will now appear in the display.
    Use the arrow sensors to select the
    letters you require. You can select
    numbers and upper and lower case
    letters using the arrow sensors.
    ^ Touch the arrow sensors to select the
    character you require. Touch the OK
    sensor.

    You can now create a profile.

    The character you have selected will
    appear in the display.

    If you have already created a profile in
    addition to the standard Miele profile,
    you have the following options:

    ^ Repeat the process until the name
    required appears in the top line of the
    display.

    – Select profile from the profiles which
    are already allocated.

    Tip: If you make a mistake, touch # to
    delete the last character.

    – Change name, if you want to alter
    the name of a profile.

    When you have finished making your
    entry and want to save it,

    – Delete profile, if you want to delete a
    profile.

    ^ use the arrow sensors to go to the
    tick ( and touch the OK sensor.

    – Change profile, to programme the
    coffee machine so that it always
    changes back to the Miele standard
    profile or so that it retains the most
    recently selected profile.

    If you do not want to save your entry,
    ^ touch # until all characters have
    been deleted and the coffee machine
    returns to the previous selection.

    Tip: Touch # or { to return to the main
    menu.

    Tip: The most recently created profile
    is selected as the current profile.

    36



  • Page 37

    Setting up profiles
    Selecting a profile

    Deleting a profile

    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.

    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.

    ^ Touch the arrow until "Select profile"
    is highlighted. Touch the OK sensor.

    ^ Touch the arrow sensors until "Delete
    profile" is highlighted. Touch the OK
    sensor.

    ^ Use the arrow sensors to select the
    profile you want. Touch the OK
    sensor.
    The name of the current profile is
    shown in the top left of the display.

    Changing the name

    ^ Use the arrow sensors to select the
    profile you want to delete.
    ^ Touch the OK sensor.
    A tick ( will appear beside the profile
    and after a short while the profile will be
    deleted.

    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.
    ^ Touch the arrows until "Change
    name" is highlighted in the display.
    Touch the OK sensor.
    Now proceed as described in "Creating
    a profile".
    – to delete a character, select #,
    – to enter new characters, select the
    relevant character and confirm with
    OK,
    – to save the altered name, select (
    and touch the OK sensor.

    37



  • Page 38

    Setting up profiles
    Changing a profile
    You can programme the machine so
    that it always changes back to the
    Miele standard profile automatically
    after each drink has been dispensed or
    so that it retains the most recently
    selected profile.
    ^ Touch the arrow sensors until
    "Change profile" is highlighted in the
    display. Touch the OK sensor.
    You now have the following options:
    – Manually: The currently selected
    profile will remain active until you
    select another profile.
    – After each use: The machine will
    change back to the Miele standard
    profile automatically after a drink is
    dispensed.
    – When switched on: Each time the
    machine is switched on it will
    automatically select the Miele standard profile regardless of which
    profile was selected before the
    machine was last switched off.
    ^ Touch the arrow sensors until the
    option you want is highlighted.
    Touch the OK sensor.

    38



  • Page 39

    Settings
    You can use the "Settings" menu to
    customise the coffee machine to suit
    your requirements.

    Calling up the "Settings" menu
    ^ Touch X.

    Changing and saving settings
    ^ Touch X.
    ^ Select the setting you want with the
    arrow sensors and touch the OK
    sensor.

    You can now check or alter settings.

    ^ Touch the arrow sensors until the
    option you want is highlighted.

    Options which are currently selected
    will have a tick ( next to them.

    ^ Touch the OK sensor.
    The setting is now saved.

    Touch # to return to the previous
    menu.
    Touch X to return to "Select drink".
    Tip: If you have switched on the time
    of day display or selected "Night
    dimming", you can alter settings without
    switching the coffee machine on by
    touching X.

    39



  • Page 40

    Settings
    Possible setting options
    The factory setting for the option is shown in bold.
    Option

    Available settings

    Language

    Deutsch, English and other languages
    Country

    Time

    Display
    Off / On / Night dimming
    Clock format
    12 h / 24 h
    Set

    Date

    Set

    Timer

    Timer 1
    Set
    switch on at / switch off after (1:00) / switch off at
    Days of the week
    Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
    Sunday / Accept
    Activate
    Switch on at (Yes / No) / Switch off at (Yes / No)
    Timer 2
    Set
    Switch on at / Switch off at
    Days of the week
    Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
    Sunday / Accept
    Activate
    Switch on at (Yes / No) / Switch off at (Yes / No)

    Eco mode

    Eco mode (On / Off)

    Lighting

    Brightness
    Switch off after

    Info

    Number of drinks
    Total no. of portions / espresso / coffee / long coffee / cappuccino /
    latte macchiato / cafè latte / milk froth / hot milk / hot water
    No. of uses until descaling

    System lock

    On / Off

    Water hardness

    Soft 1
    Medium 2
    Hard 3
    Very hard 4

    Display brightness

    Set the brightness

    Volume

    Buzzer tones
    Keypad tone

    40



  • Page 41

    Settings
    Option

    Available settings

    Showroom programme

    Demo mode (On/ Off)

    Factory default

    Do not reset
    Reset

    41



  • Page 42

    Settings
    Language

    Setting the time

    You can select the language (and
    country variant of that language) for all
    the display text.

    Use the arrow sensors to set the hours
    and minutes.

    Tip: If you select the wrong language
    by mistake, follow the flag symbol F to
    find the Language option again.

    Date

    Time

    Timer

    You can set the time display, the clock
    format and the time.

    There are two timers with the following
    functions:

    Display (Time of day display)

    The coffee machine

    You can choose from the following
    options:

    – switches on at a particular time, e.g.
    in the morning for breakfast ("Switch
    on at").

    – On: The time will show in the display
    when the machine is switched off.
    – Off: The time will not show in the
    display all the time, even when the
    machine is switched off.
    – Night dimming: The time of day will
    only show in the display during the
    daytime.
    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.
    Clock format
    The options are:
    – 24-hour display (24 h)
    – 12-hour display (12 h)

    42

    Use the arrow sensors to set the year,
    month and day.

    – switches off at a particular time
    ("Switch off at").
    – switches off after a particular length
    of time if none of the sensors have
    been touched or a drink has not
    been made ("Switch off after"; Timer
    1 only).
    You can also allocate timer functions to
    individual days of the week.
    For "Switch on at" and "Switch off at",
    the timer must be activated and at
    least one day of the week allocated.



  • Page 43

    Settings
    Selecting a timer
    The options are:
    – Timer 1:
    Switch on at, Switch off at, Switch off
    after
    – Timer 2:
    Switch on at, Switch off at
    Switch on at
    Please note that the coffee machine
    will not switch on at the required time
    if you have activated the system lock.
    Use the arrow sensors to set the hours
    and minutes.
    If the coffee machine has switched
    itself on using the "Switch on at" timer
    function 3 times and no drinks have
    been dispensed, the machine will not
    switch itself on again automatically.
    This prevents the coffee machine from
    switching itself on unnecessarily, for
    example whilst you are away on holiday.

    Switch off after
    The "Switch off after" timer function is
    only available in Timer 1.
    If none of the sensors have been
    touched or a drink has not been made,
    the coffee machine will switch itself off
    after 30 minutes to save energy.
    You can change this to another time of
    between 15 minutes and 9 hours.
    Allocating days of the week
    Select the day of the week you want.
    The day of the week selected is marked
    with a tick 9.
    When all days of the week required are
    marked,
    ^ Touch the X arrow sensor repeatedly
    until "Accept" is highlighted.
    Touch the OK sensor.

    The programmed times will, however,
    remain in memory and will be
    reactivated after manually switching the
    machine on again.
    Switch off at
    Use the arrow sensors to set the hours
    and minutes.
    If the coffee machine is not used for a
    long time, e.g. whilst you are away on
    holiday, the saved times will be
    reactivated after manually switching the
    machine on again (see "Switch on at")

    43



  • Page 44

    Settings
    Activating and deactivating the timer

    Lighting

    If the timer is activated for "Switch on
    at", the + symbol and the desired
    switching-on time appear in the display
    23:59 hours before, as long as "On" or
    "Night dimming" is selected.

    You have the following options:

    When the system lock is activated,
    the "Switch on at" option for the timer
    will not work.
    Select the timer function you want. The
    timer function selected is marked with a
    tick 9.
    ^ Touch the X arrow sensor repeatedly
    until "Accept" is highlighted.
    Touch the OK sensor.

    Eco mode

    – You can set the brightness when the
    machine is switched on.
    – You can set the brightness when the
    machine is switched off.
    – You can specify when the lighting
    should switch off ("Switch off after").
    Set the brightness
    First select:
    – Appliance switched on
    – Appliance switched off
    Alter the brightness using the arrow
    sensors.
    To switch the lighting off:

    The Eco mode is an energy-saving
    mode. The steam system only heats up
    when a coffee or steam for hot milk and
    milk froth is selected.

    ^ touch the X arrow sensor, until no
    more segments are filled in and
    "Switched off" appears.

    With Eco mode switched off, milk froth
    or hot milk, and coffee or espresso can
    be made in rapid succession. The
    steam system remains heated up and
    this uses considerably more energy.

    Setting the time the lighting switches
    off (Switch off after)

    A message regarding energy
    consumption will appear in the display.

    You can adjust the length of time that
    the coffee machine remains lit up after
    switching off.
    When the coffee machine is switched
    on, it remains lit up for 10 minutes after
    the last action. This time cannot be
    altered.
    Use the arrow sensors to set the hours
    and minutes.

    44



  • Page 45

    Settings
    Info (Display information)

    Display brightness

    In the "Info" option, the number of
    portions prepared for each individual
    drink can be displayed.

    Alter the Display brightness using the
    arrow sensors.

    You can also see whether more than 50
    portions can be dispensed before the
    machine needs to be descaled ("No. of
    uses until descaling").

    Setting the volume

    To return to the previous display,

    To switch the tones off:

    ^ touch the OK sensor.

    ^ touch the X arrow sensor, until no
    more segments are filled in and
    "Switched off" appears.

    Locking the coffee machine
    (System lock 0)
    You can lock the coffee machine to
    prevent it being used without your
    knowledge, by children, for example.
    Activating and deactivating the
    system lock 0
    When the system lock is activated,
    the "Switch on at" option for the timer
    will not work.
    Overriding the System lock
    When "Press the OK button for 6
    seconds to unlock" appears in the
    display,
    ^ Touch the OK sensor for 6 seconds.

    You can alter the volume of the buzzer
    and keypad tones using the arrow
    sensors.

    Factory default
    You can reset the settings back to the
    ones which were set when the coffee
    machine was delivered - the factory
    default settings.
    Please refer to the "Possible setting
    options" chart for the factory settings
    which are shown in bold.
    Please note that the following settings
    will not be reset:
    - Language
    - Time of day
    - Number of drinks (dispensed)
    - Profiles

    As soon as you switch the coffee
    machine off, the system lock will be
    activated again and the coffee
    machine is locked again.

    Water hardness
    Please see "Using for the first time" for
    information about water hardness.
    45



  • Page 46

    Settings
    Demo mode (Showroom
    programme)
    Do not activate this setting for
    domestic use!
    The coffee machine can be
    demonstrated in the showroom or at
    exhibitions using the "Showroom
    programme" In this mode the machine
    lights up but drinks cannot be made or
    actions taken.
    The coffee machine cannot be
    switched off with the On/Off sensor K
    when demo mode is activated.

    46



  • Page 47

    Cleaning and care
    Quick guide

    ,Clean the coffee machine every day to prevent a build-up of bacteria.
    Recommended frequency
    Every day
    (at the end of the day)

    What do I have to clean / maintain?
    the milk flask and lid
    the water container
    the waste container
    the drip tray and the drip tray cover

    Once a week
    (or more often if badly soiled)

    the central spout
    the central spout connector
    the interior
    Clean the milk valve with the cleaning brush.
    the small drip catcher inside the front of the machine
    the brew unit
    the front of the machine (especially straight after descaling)

    Once a month

    lubricate the cap on the central spout connector

    When prompted to

    the milk pipework (using the cleaning agent for milk
    pipework)
    the brew unit (degrease with the cleaning tablets)
    descale the machine

    As required

    the coffee bean container
    use the cleaning brush to remove any blockages from the
    milk pipework

    Some components of the coffee machine are dishwasher safe. Cleaning these
    in the dishwasher frequently can cause them to become discoloured due to
    regular contact with food residues (e.g. tomatoes) in the dishwasher. The
    surface can also become damaged.
    The following must be cleaned by hand only:
    – Central spout cover
    – Brew unit
    – Coffee bean container and the coffee bean container lid
    – Maintenance panel

    47



  • Page 48

    Cleaning and care
    Danger of burning.
    Allow the coffee machine to cool
    down before cleaning. Please be
    aware that the water in the drip tray
    will be very hot.
    Do not use a steam cleaning
    appliance to clean the coffee
    machine as this will damage the
    machine.
    Do not use cleaners containing
    chlorides, acids, soda or scouring
    agents. These would damage the
    surface.

    All surfaces are susceptible to
    scratching. Scratches on glass
    surfaces could even cause a
    breakage.
    Contact with unsuitable cleaning
    agents can discolour the surfaces.
    Wipe up any spillages or splashes
    of descaling agent immediately.
    Avoid the following on all types of
    front:
    – cleaning agents containing soda,
    ammonia, acids or chlorides,
    – solvent-based cleaning agents,

    It is important to clean the machine
    regularly, as the used coffee grounds
    will soon go mouldy. Sour milk deposits
    can block the milk pipework.
    The central spout connector cap is
    lubricated with silicone grease. Take
    care not to get this on your clothes
    when removing or replacing the
    containers or other components.

    – cleaning agents containing
    descaling agents,
    – stainless steel cleaning agents,
    – dishwasher cleaner,
    – oven cleaner,
    – abrasive cleaning agents, e.g.
    powder cleaners and cream
    cleaners,
    – hard, abrasive sponges, e.g. pot
    scourers, brushes or sponges which
    have been previously used with
    abrasive cleaning agents,
    – melamine eraser blocks,
    – sharp metal scrapers.

    48



  • Page 49

    Cleaning and care
    Rinsing the coffee machine
    When a coffee drink has been
    dispensed, the coffee machine rinses
    itself before switching off to remove any
    remaining coffee residue.
    You can also rinse the coffee pipework
    manually.
    ^ Touch x .
    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until "Rinse
    appliance" is highlighted in the
    display. Touch the OK sensor.
    The pipework will now be rinsed
    through.

    Milk pipework
    All parts of the milk system need to
    be cleaned thoroughly and regularly
    Milk contains bacteria which
    proliferate rapidly with inadequate
    cleaning. A dirty machine can be
    harmful to health.
    Rinsing the milk pipework
    Milk residue can clog up the milk
    pipework. If you have made a drink with
    milk, the coffee machine will rinse the
    milk pipework after a few minutes.
    You can also rinse the milk pipework
    manually.
    Tip: Place a suitable container
    underneath the central spout.
    ^ Touch x .
    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until "Rinse
    milk pipework" is highlighted in the
    display. Touch the OK sensor.
    The milk pipework will now be rinsed
    through. The water used for the rinsing
    process will run out of the central spout.

    49



  • Page 50

    Cleaning and care
    Cleaning the milk pipework using the
    cleaning agent for milk pipework

    To clean the milk pipework:
    ^ Touch x .

    All parts of the milk system need to
    be cleaned thoroughly and regularly

    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.

    Milk contains bacteria which
    proliferate rapidly with inadequate
    cleaning. A dirty machine can be
    harmful to health.

    ^ Touch the arrow sensors until "Clean
    milk pipework" is highlighted in the
    display. Touch the OK sensor.

    The milk pipework must be cleaned at
    least once a week. The coffee machine
    will prompt you at the correct time.
    "Clean the milk pipework in 3 days" will
    appear in the display three days before
    the coffee machine is due to be
    cleaned. Each time the coffee machine
    is switched on the number of days until
    the milk pipework needs to be cleaned
    will appear in the display.
    ^ Touch the OK sensor to confirm.
    When the number of days reaches 0,
    "Clean milk pipework" will appear in the
    display. You cannot make drinks with
    milk until cleaning has been carried out.

    The process will start and various
    messages will appear in the display.
    ^ Follow the instructions.
    When "Fill the water container with
    cleaning agent and lukewarm water up
    to the 8 symbol and place in the
    appliance" appears, proceed as
    described below.
    Preparing the cleaning solution
    The cleaning agent for the milk system
    was developed specifically for this
    coffee machine. It is available to order
    from Miele (see back page for contact
    details), your Miele dealer or via the
    internet at www.miele-shop.com.

    ^ Touch the OK sensor.
    You can now only dispense espresso,
    coffee, long coffee and hot water. You
    will only be able to make drinks with
    milk once the milk pipework has been
    cleaned.
    The cleaning process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.

    50

    To avoid damaging the coffee
    machine, use this cleaning agent
    only.
    ^ Add one sachet of the cleaning agent
    for the milk pipework to the water
    container.



  • Page 51

    Cleaning and care
    Milk flask and lid
    It is important to keep the neck and
    flange of the flask clean (whilst filling it
    and carrying it). If the flask is dirty it
    could cause a fault with the machine.
    ^ Clean the milk flask holder on the
    coffee machine with a damp cloth.

    ^ Fill the water container up to the 8
    mark with lukewarm water and stir the
    solution.

    ^ Clean the glass milk flask in the
    dishwasher or by hand using hot
    water and a little washing-up liquid.
    Dry the milk flask thoroughly.
    Before placing the lid of the milk flask
    in the dishwasher:

    Follow the instructions on the packet
    carefully. It is important that you fill
    the water container with enough
    water. Otherwise the milk pipework
    will not be cleaned properly.
    ^ Replace the water container in the
    coffee machine and close the front.
    ^ Follow the instructions in the display.
    When "Empty the water container and
    refill it with fresh tap water" appears in
    the display:
    ^ remove the water container and rinse
    it carefully with clean water. Make
    sure that no cleaning agent is left in
    the water container. Fill the water
    container with fresh tap water and
    replace it in the machine.
    "Prog. finished" will appear in the
    display to indicate that cleaning has
    been completed.

    ^ Rinse the milk pipework in the lid
    under running water.
    If when doing this, no water runs out of
    the milk pipework a,
    ^ clean the lid as described in
    "Cleaning blockages from the milk
    pipework - Step 1: Cleaning the milk
    pipework in the lid of the milk flask".

    51



  • Page 52

    Cleaning and care
    Central spout
    Clean the stainless steel cover of the
    central spout by hand only using hot
    water and a little washing-up liquid. All
    other parts are dishwasher safe.

    ^ Hold the magnets at the side and pull
    forwards to release the unit.

    ^ Pull the central spout down as far as
    it will go a, and pull the cover
    forwards to remove it b.

    ^ Turn upper connecting piece a and
    pull it upwards to remove it. Remove
    lower connecting piece b in the
    same way.
    ^ Pull off dispensers c.
    ^ Press catch a upwards slightly,
    grasp the dispensing unit by the
    handle und pull this forwards and off
    b.

    52

    The Y-piece connnector must not be
    removed.
    ^ Clean all parts thoroughly.



  • Page 53

    Cleaning and care
    Conditioning the milk valve
    The milk valve should be cleaned once
    a week to ensure good quality milk
    froth.
    ^ Touch x.
    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.

    ^ Clean the surfaces around the central
    spout (see arrow) with a well-wrungout damp cloth.

    ^ Touch the arrow sensors until
    "Condition milk valve" is highlighted.
    Touch the OK sensor.
    The milk valve will move into the
    maintenance position.
    Important. You must remove the
    cleaning brush before confirming
    "Quit maintenance position" with
    "OK". Otherwise the coffee machine
    will be damaged.

    ^ Reassemble the dispensing unit in
    the reverse order:
    Make sure that upper connecting
    piece a clicks into position. Press
    dispensers b firmly onto the
    dispensing unit.
    ^ Replace the dispensing unit in the
    central spout.
    ^ Replace the cover.

    ^ Insert the brush in the milk valve.
    Move the brush back and forth.
    ^ Touch the OK sensor.
    The milk valve will move into the correct
    position and the milk pipework will be
    rinsed through.

    53



  • Page 54

    Cleaning and care
    Water container

    Waste container

    Change the water every day to prevent
    a build-up of bacteria.

    After a certain period of time a reminder
    to empty the waste container will
    appear in the display. The waste
    container must be cleaned when this
    message appears. However, it is better
    to clean the waste container every day
    to prevent coffee grounds from turning
    mouldy.
    There will probably also be water in the
    waste container left over from the
    rinsing process.

    Make sure that the valve, the
    underside of the water container
    and the surface the water container
    sits on are clean. Otherwise the
    water container will not sit correctly.
    ^ The water container can be cleaned
    in the dishwasher or by hand using
    hot water and a little washing-up
    liquid. After cleaning, dry the water
    container.

    ^ Clean the waste container with hot
    water and a little washing-up liquid or
    in the dishwasher, and dry with a
    cloth.
    ^ Also thoroughly clean the now
    accessible area in the machine
    where the waste container sits.

    ^ Carefully clean the surface the water
    container sits on, taking special care
    to clean the recesses properly.

    54



  • Page 55

    Cleaning and care
    Drip tray
    Clean the drip tray every day to
    prevent unpleasant odours and
    mildew.
    A message will appear in the display
    when the drip tray is full and needs to
    be emptied. Remove the tray and
    empty it at the latest when this
    message appears.
    Danger of burning. If the rinsing
    process is in progress, wait a while
    before removing the drip tray so that
    you catch any remaining water from
    the system.

    Make sure that the metal contact
    discs on the drip tray are cleaned
    and dried properly. The discs will not
    be able to detect that the drip tray is
    full if they are dirty or damp.
    ^ Clean the space under the drip tray
    ^ Push the drip tray back into the
    coffee machine.
    Make sure the drip tray has been
    pushed right into the machine as far
    as it will go.

    Drip tray cover
    ^ Remove the drip tray cover.
    ^ It can be cleaned in the dishwasher
    or by hand using hot water and a little
    washing-up liquid.
    ^ Dry the drip tray thoroughly.
    ^ Refit the cover on the drip tray
    making sure that it sits flush at the
    front.

    ^ Open the machine front, and
    carefully remove the drip tray from
    the machine.
    The grid in the drip tray prevents the
    water from spilling out of the tray
    when it is being carried.
    ^ Clean the drip tray and the grid with
    hot water and a little washing-up
    liquid, or in the dishwasher and dry
    with a cloth.

    55



  • Page 56

    Cleaning and care
    Coffee bean container

    Central spout connector

    ^ Take the coffee bean container out of
    the machine and then push the lid
    back to remove it.

    The part which connects the brew unit
    and the central spout is located on the
    inside of the machine door.

    ^ Clean the coffee bean container and
    the lid by hand using hot water and a
    little washing-up liquid, and then dry
    them both thoroughly.

    ^ Clean this connection regularly with a
    damp cloth, taking care not to wipe
    the grease off the cap.
    ^ Replace the lid, and push the
    container back into place in the
    machine.

    56

    ^ Lubricate the cap at least once a
    month with the silicone grease
    supplied.



  • Page 57

    Cleaning and care
    Interior and machine front
    ^ First take out all removable parts and
    then clean the interior and the
    machine front with a mild solution of
    hot water and washing-up liquid.
    Tip: Use your vacuum cleaner to
    remove dry coffee grounds.
    A small drip catcher is located inside
    the front of the machine at the bottom.

    Brew unit
    Clean the brew unit by hand only
    using hot water. Do not use
    washing-up liquid or any other
    cleaning agent. The moving parts of
    the brew unit are lubricated.
    Washing-up liquid or cleaning agent
    will damage the brew unit.
    Clean the brew unit once a week.
    Removing the brew unit and washing
    by hand
    The brew unit can be removed for
    cleaning. To do this:
    ^ Open the front of the machine.
    ^ Remove the water container, waste
    container and the coffee chute cover.

    ^ Remove the drip catcher and clean it
    in the dishwasher or by hand using
    hot water and a little washing-up
    liquid.
    After cleaning, remember to replace
    the drip catcher in the coffee
    machine.
    ^ Press the button under the handle of
    brew unit a and whilst doing so, turn
    the handle clockwise b.
    ^ Press the catch in front of the brew
    unit c downwards, and pull the brew
    unit out carefully.
    ^ Carefully pull the brew unit out of the
    coffee machine.
    57



  • Page 58

    Cleaning and care
    If you cannot remove the brew unit or
    can only do so with difficulty, the brew
    unit is not in the correct position (see
    "Problem solving guide").
    When the brew unit has been pulled
    out, do not alter the position of the
    brew unit handle. This would
    displace the brew unit and it would
    not fit back into the coffee machine.
    ^ Clean the brew unit by hand under
    hot running water without using
    washing-up liquid or any other
    cleaning agent.

    ^ Press the button under the handle of
    the brew unit a and whilst doing so
    turn the handle anti-clockwise b.
    ^ Close the front.
    Degreasing the brew unit
    Depending on the natural oil content of
    the coffee used, the brew unit can
    become blocked quite quickly.
    Therefore use the cleaning tablets
    supplied to clean the brew unit.

    ^ Wipe any remaining coffee off the
    filters. One filter is located in the
    funnel and the other to the left of the
    funnel.
    ^ Dry the funnel to prevent ground
    coffee sticking to it.
    ^ Clean the inside of the coffee
    machine. Use your vacuum cleaner
    to remove dry coffee grounds.
    To replace the brew unit proceed in the
    reverse order:
    ^ Push the brew unit back into the
    coffee machine, making sure it is
    straight.
    58

    These have been specially formulated
    for use in this coffee machine and are
    available to order from Miele (see back
    page for contact details), your Miele
    dealer or via the internet at www.mieleshop.com.
    After 200 portions have been
    dispensed, "Degrease the brew unit"
    will appear in the display. This
    message will not go out until
    degreasing has been carried out.
    Degrease the brew unit regularly.
    This is necessary to ensure that the
    coffee machine continues to
    dispense excellent coffee and to
    operate problem-free.



  • Page 59

    Cleaning and care
    ^ Switch the machine on with the On/
    Off sensor K.

    ^ Follow the instructions given in the
    display.

    ^ Touch x .

    When "Prog. finished" appears in the
    display:

    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until
    "Degrease the brew unit" is
    highlighted in the display. Touch the
    OK sensor.
    The cleaning process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.
    ^ Touch the OK sensor.
    ^ Follow the instructions in the display.
    When "Place a cleaning tablet in the
    ground coffee chute and close the
    chute" appears in the display:

    ^ touch the OK sensor.
    The brew unit has now been cleaned.

    Machine front
    If soiling is not removed promptly it
    could cause the surfaces of the
    machine to alter or discolour.
    Remove any soiling immediately.
    Make sure that water cannot get in
    behind the display.
    All external surfaces are susceptible
    to scratching. Scratches on glass
    surfaces could even cause a
    breakage.
    Contact with unsuitable cleaning
    agents can discolour the surfaces.
    Wipe up any spillages or splashes
    of descaling agent immediately.
    ^ Switch the machine off with the On/
    Off sensor K.

    ^ Remove the coffee chute cover and
    open the lid of the coffee chute.
    ^ Place a cleaning tablet into the coffee
    chute.

    ^ Clean the front with a clean sponge
    and a solution of hot water and
    washing-up liquid. Dry using a soft
    cloth.
    Tip: You can also use a microfibre
    cloth to clean the front.

    ^ Close the lid, replace the coffee
    chute cover and close the machine
    front.
    59



  • Page 60

    Descaling
    Limescale builds up in the coffee
    machine during use. How often, will
    depend on the hardness of the local
    water supply. Limescale must be
    removed regularly.
    The machine will guide you through the
    descaling procedure. Various
    instructions will appear in the display,
    e.g. you will be prompted to empty the
    drip tray, fill the water container, etc.
    Descaling must be carried out. The
    programme takes approx. 20 minutes.
    During the descaling process, water
    containing descaling agent will run out
    of the central spout and the hot water
    spout. This is followed by an activation
    period before a little more water
    containing descaling agent is
    dispensed.
    The coffee machine will remind you
    when descaling needs to be carried
    out. The following message will appear
    in the display: "No. of uses until
    appliance needs descaling: 50". The
    remaining number of drinks that can be
    made before descaling will now show in
    the display after each drink is made.
    ^ Touch the OK sensor to confirm.
    When 0 is reached, the coffee machine
    will lock out. "Descale the appliance"
    will appear in the display.
    You can switch the coffee machine off if
    you do not want to descale it at this
    time. However, you will not be able to
    make any more drinks until descaling
    has been carried out.

    60

    Descaling after being
    prompted by the display
    ^ Touch the OK sensor to start the
    descaling process.
    The descaling process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.
    The process will start and various
    messages will appear in the display.
    ^ Follow the instructions.
    When "Fill water container with
    descaling agent and lukewarm water
    up to the F symbol and place in the
    appliance" appears in the display,
    proceed as described below.
    Preparing the descaling solution
    The descaling tablets supplied have
    been specially formulated for use with
    this coffee machine and are available to
    order from Miele (see back page for
    contact details), your Miele dealer or
    via the internet at www.miele-shop.com.
    You will need two descaling tablets for
    each descaling process.
    Only use Miele descaling tablets.
    Other types of descaling agents will
    damage the coffee machine and
    affect the taste.



  • Page 61

    Descaling
    ^ Fill the water container up to the mark
    with lukewarm water.

    ^ Touch the OK sensor.
    The coffee machine has now been
    descaled and can be used for making
    drinks again.
    When descaling the machine, wipe
    up any spillages or splashes of
    descaling agent immediately. These
    would damage the surface.

    ^ Drop two descaling tablets in the
    water.
    Follow the instructions for the mixing
    ratio carefully. It is important that
    you fill the water container with
    enough water. Otherwise the
    descaling programme will be
    cancelled prematurely.
    ^ Replace the water container in the
    coffee machine and close the front.
    ^ Follow the instructions in the display.
    When "Rinse the water container and fill
    with fresh water up to the F symbol"
    appears,
    ^ Remove the water container and
    rinse it carefully with clean water.
    Make sure that no descaling agent is
    left in the water container. Fill the
    water container with fresh, clean tap
    water up to the F symbol.
    Also empty the waste container.

    After descaling the machine, carefully
    rinse the water container and the drip
    tray to remove all traces of descaling
    agent.

    Descaling when not prompted
    by a message
    ^ Touch x .
    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until
    "Descale the appliance" is
    highlighted in the display.
    The descaling process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.
    ^ Touch the OK sensor.
    The descaling process will begin.

    "Prog. finished" will appear in the
    display to indicate that descaling has
    been completed.
    61



  • Page 62

    Problem solving guide
    With the aid of the following guide, minor problems can be easily corrected
    without contacting Miele.

    ,Warning. Do not open the outer casing of the machine.
    Repairs may only be carried out by a suitably qualified and competent person
    in strict accordance with national and local safety regulations. Repairs and
    other work by unqualified persons can cause considerable danger to users.
    The manufacturer cannot be held liable for unauthorised work.
    If you cannot resolve the problem following these instructions please contact Miele
    (see back cover for contact details).

    Messages in the display
    ^ Follow the instructions to remedy the problem.
    ^ If after this, the fault message appears in the display again, contact Miele.

    Message

    Possible cause and remedy

    Fault 1 to 4
    80 to 83

    There is a fault inside the machine.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for one hour and then switch it back on again.

    Fault 74, 77
    Fault 225, 226
    Fault 235, 236

    There is a fault inside the machine.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. 2 minutes and then switch it back on
    again.

    62



  • Page 63

    Problem solving guide
    Message

    Possible cause and remedy

    Fault 73
    or
    "Check the brew
    unit"

    ^ The brew unit cannot move into the correct position or it is
    dirty and the ground coffee cannot be processed.
    ^ Try to remove the brew unit (see "Cleaning and care – Brew
    unit").
    ^ If you can, take it out and clean it (see "Cleaning and care –
    Brew unit").

    Push the coffee ejector of the brew unit into the correct
    position (see illustration).
    ^ Replace the waste container and the water container in the
    coffee machine. Do not replace the brew unit. Close the
    front of the coffee machine and switch the coffee machine
    on with the On/Off sensor K.
    The brew unit motor will now be initialised.
    ^ When "Insert the brew unit" appears, open the front and
    replace all the parts in the machine.
    If you cannot remove the brew unit:
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. 2 minutes and then switch it back on
    again.

    63



  • Page 64

    Problem solving guide
    Message

    Possible cause and remedy

    "Too much
    ground coffee"

    There is too much ready ground coffee in the ground coffee
    chute.
    If more than one level spoon of ground coffee is added to the
    coffee chute, the brew unit cannot process the coffee. The
    ground coffee will be directed into the waste container and a
    fault message will appear in the display.
    ^ Switch the coffee machine off with the On/Off sensor K.
    ^ Remove the brew unit and clean it (see "Cleaning and care
    – Brew unit").
    ^ Remove the ground coffee in the interior of the coffee
    machine e.g. using a vacuum cleaner.
    ^ Use the coffee spoon supplied for adding ground coffee.
    Add one level spoon only to the ground coffee chute.

    "Push the water
    The water container is not positioned correctly inside the
    container in until it machine.
    engages"
    ^ Remove the water container and replace it.
    This fault message also appears if the water container was
    not correctly filled and positioned for descaling.
    ^ Fill the water container with fresh tap water up to the F
    symbol and start the descaling process again.

    64



  • Page 65

    Problem solving guide
    Unusual performance of the coffee machine
    Problem

    Possible cause and remedy

    When the coffee
    machine is
    switched on the
    lighting does not
    come on.

    The lighting has been switched off.
    ^ Switch it back on (see "Settings - Lighting").

    The display
    remains dark
    when the coffee
    machine is
    switched on using
    the On/Off sensor
    K.

    The On/Off sensor K was not touched for long enough.
    ^ Touch the depression in middle of the On/Off sensor K for
    at least 3 seconds.

    The lighting is faulty.
    ^ Contact Miele.

    The plug is not inserted in the socket correctly.
    ^ Insert the plug in the socket correctly and switch on.
    The main fuse has tripped due to a problem with the coffee
    machine, the electricity supply or another appliance.
    ^ Switch off at the wall socket and unplug it.
    ^ Contact a qualified electrician or Miele.

    The coffee
    The switching off time programmed using the timer has been
    machine switches reached.
    off suddenly.
    ^ If required, you can select a new switching off time (see
    "Settings - Timer").
    The plug is not inserted in the socket correctly.
    ^ Insert the plug in the socket correctly and switch on.
    The coffee
    machine is
    switched on. The
    lighting suddenly
    switches off.

    The lighting will switch itself off automatically after 10
    minutes, if the coffee machine is not used for a certain length
    of time.

    The sensors do
    not react to touch.
    You cannot
    operate the coffee
    machine.

    There is a fault inside the machine.
    ^ Open the front of the coffee machine.
    The current process will be stopped.
    ^ Disconnect the machine from the power supply.
    65



  • Page 66

    Problem solving guide
    Problem

    Possible cause and remedy

    The coffee
    machine does not
    switch itself on,
    although the
    "Switch on at"
    setting has been
    activated for the
    timer.

    The system lock is activated.
    ^ Deactivate the system lock (see "Settings - System lock").

    You cannot read
    the display.

    The display brightness has been set too low.
    ^ Adjust the brightness (see "Settings - Display brightness")

    After being
    switched on,
    "Push the water
    container in until it
    engages" appears
    in the display
    although the water
    container has
    been filled and
    inserted.
    The machine does
    not rinse.

    The coffee machine needs to be descaled.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. one hour.

    The day of the week has not been selected.
    ^ Check the timer settings and change these if necessary
    (see "Settings - Timer").
    The machine was not used after being switched on
    automatically 3 times in succession.
    ^ Switch the machine on and make a drink.

    ^ Switch the coffee machine on again. As soon as "Heatingup phase" appears in the display, touch x and select
    "Maintenance" and the "Descale the appliance"
    ^ Descale the coffee machine.

    The milk pipework The milk pipework or the air intake tube is blocked.
    is being rinsed
    ^ Follow the instructions in "Cleaning blockages from the
    through but there
    milk pipework".
    is no rinse water
    coming out of the
    central spout.
    "Push the water
    container in until it
    engages" appears
    in the display.

    66



  • Page 67

    Problem solving guide
    Problem

    Possible cause and remedy

    There is no milk or The milk pipework or the air intake tube is blocked.
    milk froth being
    ^ Follow the instructions in "Cleaning blockages from the
    dispensed from
    milk pipework".
    the central spout.
    "Fill and insert milk The lid of the milk flask could be dirty preventing the sensors
    flask", appears in from working properly.
    the display
    ^ Clean the milk flask and the lid thoroughly (see "Cleaning
    although the milk
    blockages from the milk pipework").
    flask has been
    filled and inserted
    in the coffee
    machine.
    "Empty the drip
    tray" appears in
    the display
    although the drip
    tray has been
    emptied.

    The drip tray has not been correctly positioned inside the
    machine.
    ^ Push the drip tray back in as far as it will go.
    The sensors on the drip tray are not working properly.
    ^ Switch the coffee machine off with the On/Off sensor K.
    The metal contact discs are dirty.
    ^ Clean and dry the metal contacts thoroughly (see
    "Cleaning and care - Drip tray").

    The machine front The containers are not pushed into the machine completely.
    will not close
    ^ Check the containers.
    properly.
    The machine front The hinges are not aligned correctly.
    will not close
    ^ Adjust the hinges (see "Installation - Adjusting the hinges").
    properly.
    Drink preparation
    is cancelled.

    If the water container becomes empty while a drink is being
    made, after the water container is filled and replaced
    "Continue? Yes / No" will appear in the display. If you do not
    confirm "Yes" within 5 minutes, the drink will be cancelled.

    67



  • Page 68

    Problem solving guide
    Unsatisfactory results
    Problem

    Possible cause and remedy

    The consistency of The temperature of the milk is too high. Cold milk (below
    the milk froth in
    13 °C) gives the best results for milk froth.
    unsatisfactory.
    ^ Check the temperature of the milk in the milk flask.
    The milk pipework or the air intake tube is blocked.
    ^ Follow the instructions in "Cleaning blockages from the
    milk pipework".
    The coffee grinder The coffee bean container has become empty during the
    makes a louder
    grinding process.
    noise than usual. ^ Fill the container with fresh beans.
    There could be stones in amongst the coffee beans.
    ^ Switch the coffee machine off immediately. Contact Miele.
    Espresso or coffee The coffee is too coarsely ground.
    flows into the cup ^ Set the grinder on a finer setting (see "Grinder setting").
    too quickly.
    Espresso or coffee The coffee is too finely ground.
    flows into the cup ^ Set the grinder on a coarser setting (see "Grinder setting").
    too slowly.
    The cup has not been pre-heated.
    The coffee or
    espresso is not hot
    The brewing temperature has been set too low.
    enough.
    ^ Set a higher brewing temperature (see "Brewing
    temperature).
    The filters in the brew unit are blocked.
    ^ Remove and clean the brew unit by hand (see "Cleaning
    and care - Brew unit")
    ^ Degrease the brew unit (see "Cleaning and care - Brew
    unit")

    68



  • Page 69

    Problem solving guide
    Problem

    Possible cause and remedy

    The crema on the The grinder setting is not correct.
    coffee or espresso ^ Set the grinder on a finer or coarser setting (see "Grinder
    is not as it should
    setting").
    be.
    The brewing temperature is too high for this type of coffee.
    ^ Set a lower brewing temperature (see "Brewing
    temperature").
    The coffee beans are no longer fresh.
    ^ Add new coffee beans to the coffee bean container.

    69



  • Page 70

    Cleaning blockages from the milk pipework
    If you notice that the quality of the milk
    froth is not satisfactory, this could be
    caused by a blockage in the air intake
    tube. Follow the instructions in "Step 2:
    Cleaning the air intake tube and the
    angled connector in the inside of the
    machine front"

    Step 1: Cleaning the milk
    pipework in the lid of the milk
    flask

    If only steam instead of milk is coming
    out of the central spout, follow the
    instructions in Steps 1 to 4.
    First check that the milk in the milk
    flask has not gone sour as this can
    block the milk pipework.
    Follow the steps in the cleaning
    procedure below to clean blocked milk
    pipework. After cleaning, check that the
    process for heating and frothing milk is
    working well and that the quality is now
    satisfactory.
    If the process for heating and frothing
    milk is still not working well and the
    quality is still not satisfactory, do not
    make any drinks and repeat the steps
    as described.

    ^ Pull milk suction tube a out of the
    milk flask lid.
    Ensure that you also remove seal b
    when doing this.
    ^ Clean both under running water.
    Insert the cleaning brush supplied
    into the stainless steel tube and move
    it back and forth until all milk deposits
    have been removed.

    ^ Also use the cleaning brush to clean
    the milk pipework in the lid.

    70



  • Page 71

    Cleaning blockages from the milk pipework
    To reassemble the lid:.
    ^ First insert the seal in the lid. Then fit
    the milk intake tube into the seal.
    Make sure that you do not fit the
    slanted end of the milk intake tube
    into the seal.

    Step 2: Cleaning the air intake
    tube and the angled connector
    in the inside of the machine
    front
    Do not use a needle or similar
    implement. This would damage the
    components.
    ^ Pull the central spout all the way
    down.

    ^ First release air intake tube a from
    opening c. Then pull off angled
    connector b.
    ^ Pull both tubes out of the angled
    connector.
    ^ Use the cleaning brush supplied to
    clean air intake tube a. "Blowing
    through" can also help to dislodge
    blockages.
    ^ Clean the opening in the door for air
    intake tube c.
    ^ Clean angled connector b under
    running water. If necessary, replace it
    with the spare part supplied.

    ^ Open the maintenance panel on the
    inside of the front of the coffee
    machine.

    ^ Insert the brush in milk tube d. Move
    the brush back and forth as far as
    possible until all milk deposits have
    been removed.

    71



  • Page 72

    Cleaning blockages from the milk pipework
    Step 4: Conditioning the milk
    valve
    ^ Touch x.
    ^ Touch the Y arrow until
    "Maintenance" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until
    "Condition milk valve" is highlighted.
    Touch the OK sensor.
    ^ Push the tubes back onto the angled
    connector and replace this in the
    machine. Make sure that the angled
    connector is positioned, as shown
    (see arrow).
    ^ Re-insert the air intake tube into
    opening c.

    The milk valve will move into the
    maintenance position.
    Important. You must remove the
    cleaning brush before confirming
    "Quit maintenance position" with
    "OK". Otherwise the coffee machine
    will be damaged.

    Step 3: Cleaning the milk
    pipework in the central spout
    ^ Remove and dismantle the
    dispensing unit as described in
    "Cleaning and care - Central spout".
    ^ Rinse all parts carefully under
    running water.
    Use the cleaning brush to clean all
    parts carefully. In order to avoid
    pushing out the silicone parts, do
    not use a needle or similar
    implement.
    ^ Reassemble the central unit and
    replace it in the central spout.
    ^ Replace the cover.

    72

    ^ Insert the brush in the milk valve.
    Move the brush back and forth.
    ^ Touch the OK sensor.
    The milk valve will move into the correct
    position and the milk pipework will be
    rinsed through.



  • Page 73

    After Sales / Guarantee
    In the event of a fault which you cannot
    correct yourself, or if the appliance is
    under guarantee, please contact:
    – your Miele Dealer
    or
    – Miele (see the end of this booklet for
    contact details).
    Please note that telephone calls may
    be monitored and recorded for
    training purposes (UK only).

    When contacting your Dealer or Miele,
    please quote the model and serial
    number of your machine. These are
    shown on the data plate inside the
    machine.
    N.B. A call-out charge will be applied
    for service visits where the problem
    could have been resolved as described
    in these instructions.

    Guarantee
    Guarantee: U.K.
    In the U.K, the appliance is guaranteed
    for 2 years from the date of purchase.
    However, you must activate your cover
    by calling 0845 365 6640 or registering
    online at www.miele.co.uk.
    Guarantee: Other countries
    For information on the appliance
    guarantee specific to your country
    please contact Miele.
    See end of this booklet for contact
    details.

    73



  • Page 74

    Saving energy
    Changing the following settings from
    their factory default will increase the
    energy consumption of the coffee
    machine:
    – Eco mode
    – Lighting
    – Time of day display
    – Timer
    When altering these settings, the
    message "This setting increases energy
    consumption" will appear in the display.

    74



  • Page 75

    Electrical connection U.K., ZA, IRL
    All electrical work should be carried out
    by a suitably qualified and competent
    person only, in strict accordance with
    current national and local safety
    regulations (BS 7671 in the UK).
    Installation, repairs and other work by
    unqualified persons could be
    dangerous. The manufacturer cannot
    be held liable for unauthorised work.
    Ensure power is not supplied to the
    machine until after installation work has
    been carried out.
    The voltage and frequency are given on
    the data plate. Please ensure these
    match the household mains supply. The
    fuse rating is quoted on the plug.

    Non-rewireable plugs BS 1363
    The fuse cover must be refitted when
    changing the fuse, and if the fuse cover
    is lost, the plug must not be used until a
    suitable replacement is obtained. The
    colour of the correct replacement cover
    is that of the coloured insert in the base
    of the plug, or the colour that is
    embossed in words on the base of the
    plug (as applicable to the design of
    plug fitted).
    Replacement fuses should be ASTA
    approved to BS 1362 and have the
    correct rating. Replacement fuses and
    fuse covers may be purchased from
    your local electrical supplier.

    The machine is supplied with a mains
    cable with moulded plug for connection
    to a 230 - 240 V mains supply.

    Do not connect the machine to an
    inverter such as those used with an
    autonomous energy source e.g. Solar
    power.

    Connection should be made via a fused
    plug and suitable switched socket
    which is easily accessible after
    installation.

    When switched on peak loads in the
    system can cause the safety switch off
    mechanism to be triggered. This can
    damage the electronic unit.

    Do not connect via an extension lead.

    The machine must not be used with socalled Energy saving devices either.
    These reduce the amount of energy
    supplied to the machine causing it to
    overheat.

    For extra safety it is advisable to protect
    the appliance with a suitable residual
    current device (RCD). Contact a
    qualified electrician for advice.
    If the socket is not accessible after
    installation (depending on country) an
    additional means of disconnection must
    be provided for all poles.
    WARNING: THIS APPLIANCE
    MUST BE EARTHED

    75



  • Page 76

    Installation
    Building-in and combination options
    The machine is designed for installation in a tall unit.

    It can also be combined with other Miele built-in appliances. If the coffee machine
    is to be built in above another appliance, there must be a full-width, closed shelf
    between them (except when it is combined with a suitable Miele built-in plate or
    food warming drawer).

    76



  • Page 77

    Installation
    Ventilation
    Ensure that the back of the coffee
    machine is sufficiently ventilated so that
    steam and warm air can dissipate
    freely.

    To align the machine front with the
    furniture front ensure that there is a
    sealing strip provided all the way
    around the building-in niche or around
    the coffee machine.

    The ventilation gaps in the furniture
    housing unit and the gap between
    the top of the housing unit and the
    ceiling must be at least 200 cm².
    Otherwise condensation can build up
    and damage the machine or the
    housing unit.
    Installation
    Before installation make sure that
    there is no power supply to the
    machine. This also applies should it
    ever need to be taken out of its
    housing unit.
    The machine must be built in before
    it is operated. It is designed for use
    in ambient temperatures ranging
    from +10 °C to +38° C.

    ^ If the housing unit niche is not fitted
    with a sealing strip you should fit a
    Miele sealing strip to the machine
    before installing it. This is fitted from
    the back of the machine.
    This sealing strip is available to order
    from Miele.

    You will need two Allen keys (size 3
    and 5) for installing the machine.

    77



  • Page 78

    Installation
    Tip: It is useful to have somewhere at
    the height of the niche to place the
    machine on. This makes electrical
    connection easier.

    ^ Using the large allen key, unscrew all
    four feet underneath the machine out
    by approx. 2 mm.
    The feet can be unscrewed by up to
    approx. 10 mm.
    ^ Connect the machine to the electrical
    supply.
    ^ Push it all the way into the niche until
    you feel resistance.
    Take care not to damage the
    electrical connection when pushing
    the coffee machine into the niche.
    ^ Check the height of the machine to
    make sure that it is sitting centrally in
    the niche and that it is level. If this is
    not the case, realign the machine
    with using the four feet underneath.
    Four M5 hexagon socket screws are
    supplied for aligning and securing the
    machine in its niche.

    78

    ^ Open the front of the machine and
    partially tighten the side socket
    screws.

    ^ Carefully turn lower socket screws to
    centre the machine in the niche.
    ^ Tighten both upper socket screws by
    hand to secure the machine in the
    unit. Do not overtighten them.



  • Page 79

    Installation
    Adjusting the hinges
    If the machine front becomes difficult to
    open or close after installation you can
    adjust the hinges to realign it (TX 20):

    ^ Turn screw a to align the front of the
    machine so that it is flush with the
    front of the housing unit.
    ^ Turn screw b to align the front of the
    machine horizontally and vertically.

    79



  • Page 80

    80



  • Page 81

    81



  • Page 82

    82



  • Page 83

    8QLWHG.LQJGRP
    -IELE#O,TD
    &AIRACRES -ARCHAM2OAD
    !BINGDON /XON /847
    4EL

  • Page 84

    CVA 6401
    en - GB

    M.-Nr. 09 549 661 / 00






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele CVA 6401 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Miele CVA 6401 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,57 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Miele CVA 6401

Miele CVA 6401 Bedienungsanleitung - Deutsch - 88 seiten

Miele CVA 6401 Bedienungsanleitung - Deutsch - 4 seiten

Miele CVA 6401 Bedienungsanleitung - Deutsch - 84 seiten

Miele CVA 6401 Kurzanleitung - Holländisch - 2 seiten

Miele CVA 6401 Bedienungsanleitung - Holländisch - 84 seiten

Miele CVA 6401 Bedienungsanleitung - Französisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info