Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
Operating and installation instructions
Built-in coffee machine
To avoid the risk of accidents or damage to the appliance it is essential
t
o read these instructions before it is installed and used for the first time.
en – GB M.-Nr. 10 214 100
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Operating and installation instructions
    Built-in coffee machine

    To avoid the risk of accidents or damage to the appliance it is essential
    to read these instructions before it is installed and used for the first time.

    en – GB

    M.-Nr. 10 214 100



  • Page 2

    Packaging material / Disposal of old machine
    Disposal of the packing
    material
    The packaging is designed to protect
    the machine from damage during
    transportation. The packaging materials
    used are selected from materials which
    are environmentally friendly for disposal
    and should be recycled.
    Recycling the packaging reduces the
    use of raw materials in the
    manufacturing process and also
    reduces the amount of waste in landfill
    sites.

    Disposing of your old machine
    Electrical and electronic machines often
    contain valuable materials. They also
    contain materials which, if handled or
    disposed of incorrectly, could be
    potentially hazardous to human health
    and to the environment. They are,
    however, essential for the correct
    functioning of your machine. Please do
    not therefore dispose of it with your
    household waste.

    Please dispose of it at your local
    community waste collection / recycling
    centre or contact your dealer for
    advice.
    Ensure that it presents no danger to
    children while being stored for disposal.

    2



  • Page 3

    Contents
    Packaging material / Disposal of old machine ................................................... 2
    Warning and Safety instructions .......................................................................... 6
    Guide to the machine .......................................................................................... 17
    Controls and display ............................................................................................ 19
    Accessories .......................................................................................................... 20
    Using for the first time......................................................................................... 21
    Before using for the first time................................................................................. 21
    Switching on for the first time ................................................................................ 21
    Water hardness ...................................................................................................... 23
    Operation .............................................................................................................. 24
    Filling the water container................................................................................... 25
    Filling the coffee bean container ........................................................................ 26
    Switching on and off ............................................................................................ 27
    Adjusting the central spout to the correct cup height ..................................... 28
    Making drinks....................................................................................................... 29
    Making a coffee ..................................................................................................... 29
    Making two portions .............................................................................................. 30
    Cancelling preparation ........................................................................................... 30
    Dispensing several cups of coffee one after the other - Coffee pot ...................... 31
    Making coffee with ground coffee ......................................................................... 31
    Drinks with milk...................................................................................................... 33
    Dispensing hot water ............................................................................................. 34
    Making drinks using a profile ................................................................................. 35
    After making drinks ................................................................................................ 35
    Coffee the way you like it .................................................................................... 36
    Grinder setting ....................................................................................................... 36
    Displaying and changing the parameters of a drink .............................................. 37
    Amount of coffee .............................................................................................. 37
    Brewing temperature ........................................................................................ 38
    Pre-brewing the coffee ..................................................................................... 38
    Portion size ........................................................................................................... 39

    3



  • Page 4

    Contents
    Profiles .................................................................................................................. 41
    Opening a profile.................................................................................................... 41
    Creating a profile............................................................................................... 41
    Selecting a profile ............................................................................................. 42
    Changing the name........................................................................................... 42
    Deleting a profile ............................................................................................... 42
    Changing a profile............................................................................................. 43
    Settings ................................................................................................................. 44
    Opening the Settings menu ................................................................................... 44
    Changing and saving settings................................................................................ 44
    Possible setting options......................................................................................... 45
    Language ............................................................................................................... 47
    Time ....................................................................................................................... 47
    Date........................................................................................................................ 47
    Timer ...................................................................................................................... 47
    Eco mode............................................................................................................... 49
    Lighting .................................................................................................................. 50
    Info (display information)........................................................................................ 50
    Locking the coffee machine (System lock )........................................................ 51
    Water hardness ...................................................................................................... 51
    Display brightness ................................................................................................. 51
    Volume ................................................................................................................... 51
    Activating and deactivating mains water connection ............................................ 51
    Factory default ....................................................................................................... 52
    Demo mode (Showroom programme) ................................................................... 52
    Cleaning and care ................................................................................................ 53
    Quick guide............................................................................................................ 53
    Cleaning by hand or in the dishwasher.................................................................. 54
    Drip tray ................................................................................................................. 56
    Drip tray cover........................................................................................................ 57
    Water container...................................................................................................... 57
    Waste container ..................................................................................................... 58
    Central spout ......................................................................................................... 58
    Maintenance of the milk valve ............................................................................... 60
    Milk flask and lid .................................................................................................... 61
    Coffee bean container ........................................................................................... 62
    Interior and machine front...................................................................................... 63
    Central spout connector ........................................................................................ 63
    Brew unit ................................................................................................................ 64
    Removing and cleaning the brew unit by hand ................................................ 64

    4



  • Page 5

    Contents
    Maintenance programmes ..................................................................................... 65
    Opening the "Maintenance" menu.................................................................... 65
    Rinsing the machine .............................................................................................. 66
    Rinsing the milk pipework...................................................................................... 66
    Cleaning the milk pipework.................................................................................... 67
    Degreasing the brew unit ....................................................................................... 69
    Descaling the machine ........................................................................................ 70
    Problem solving guide ......................................................................................... 74
    Messages in the display ........................................................................................ 74
    Unusual performance of the coffee machine......................................................... 77
    Unsatisfactory results ............................................................................................ 82
    Problems when heating up or frothing milk ........................................................... 84
    Replacing the angled connector ............................................................................ 85
    After Sales / Guarantee ....................................................................................... 87
    Saving energy ....................................................................................................... 88
    Plumbed in water connection ............................................................................. 89
    Electrical connection ........................................................................................... 91
    Installation ............................................................................................................ 92
    Building-in and combination options..................................................................... 92
    Ventilation .............................................................................................................. 93
    Building in the coffee machine............................................................................... 94
    Adjusting the hinges .............................................................................................. 95

    5



  • Page 6

    Warning and Safety instructions
    This coffee machine complies with current safety requirements.
    Improper use can, however, present a risk of both personal injury
    and material damage.
    To avoid the risk of accidents and damage to the machine, please
    read these instructions carefully before using it for the first time.
    They contain important notes on installation, safety, use and
    maintenance.
    Miele cannot be held liable for damage caused by noncompliance with these instructions.
    Keep these instructions in a safe place and pass them on to any
    future owner.

    6



  • Page 7

    Warning and Safety instructions
    Correct application
     This coffee machine is intended for use in domestic households
    and similar working and residential environments.
    Examples of a working or residential environment include
    – shops, offices and other working environments,
    – small businesses, showrooms etc.,
    – where the coffee machine is being used by customers in hotels,
    motels, bed and breakfast and other similar establishments.

     This coffee machine is not intended for outdoor use.
     It must only be used as a domestic appliance to make espresso,
    cappuccino, latte macchiato etc. Any other use is not permitted.

     This coffee machine can only be used by people with reduced

    physical, sensory or mental capabilities, or lack of experience and
    knowledge, if they are supervised whilst using it, or have been
    shown how to use it in a safe way and recognise and understand the
    consequences of incorrect operation.

    7



  • Page 8

    Warning and Safety instructions
    Safety with children
     Caution! Danger of burning and scalding on the dispensing
    spouts.
    Children's skin is far more sensitive to high temperatures than that
    of adults.
    Ensure children do not touch hot surfaces of the coffee machine
    or place parts of their body under the dispensing spouts.

     Install the coffee machine where it is out of the reach of children.
     Children under 8 years of age must be kept away from the
    machine unless they are constantly supervised.

     Children 8 years and older may only use the coffee machine

    unsupervised if they have been shown how to use it safely and
    recognise and understand the consequences of incorrect operation.

     Please supervise children in the vicinity of the coffee machine and
    do not allow them to play with it.

     Children must not be allowed to clean the coffee machine
    unsupervised.

     Remember that coffee and espresso are not suitable drinks for
    children.

     Danger of suffocation.

    Packaging, e.g. plastic wrappings, must be kept out of the reach of
    babies and children. Whilst playing, they could become entangled in
    packaging or pull it over their head and suffocate.

    8



  • Page 9

    Warning and Safety instructions
    Technical safety
     Installation and repairs may only be carried out by a Miele

    authorised service technician. Installation, repairs and other work by
    unqualified persons can cause considerable danger to users.

     A damaged coffee machine could be dangerous. Before building
    in the machine, check it for any externally visible damage. Do not
    use a damaged machine.

     To avoid the risk of damage to the machine, make sure the

    connection data (voltage and frequency) on the data plate
    corresponds to the household supply, before connecting the
    machine to the mains supply. Consult a qualified electrician if in any
    doubt.

     The electrical safety of this coffee machine can only be

    guaranteed when correctly earthed. It is essential that this standard
    safety requirement is met. If in any doubt please have the electrical
    installation tested by a qualified electrician.

     Reliable and safe operation of the coffee machine can only be
    guaranteed if it is connected to the mains electrical supply.

     Do not connect the machine to the mains electricity supply by a
    multi-socket adapter or an extension lead. These are a fire hazard
    and do not guarantee the required safety of the appliance.

     The coffee machine must not be used in a non-stationary location
    (e.g. on a ship).

     For safety reasons, this machine may only be used when it has
    been built in.

     If the coffee machine is to be built in above another appliance,
    there must be a full-width, closed shelf between them.

     Only use the coffee machine in rooms where the ambient
    temperature is between +10 °C and +38 °C.

    9



  • Page 10

    Warning and Safety instructions
     Do not cover or block the ventilation gaps.

    This would prevent adequate ventilation. Condensation can damage
    the coffee machine or the furniture housing unit.

     Ensure that there is sufficient ventilation around the coffee

    machine. The ventilation gaps in the furniture housing unit and the
    gap between the top of the housing unit and the ceiling must be at
    least 200 cm2. Otherwise condensation can build up and damage
    the machine or the housing unit.

     If the coffee machine is built-in behind a kitchen furniture door, it

    may only be used with the furniture door open. This will prevent the
    formation of heat and humidity and subsequent damage to the
    machine and/or furniture unit. Do not close the furniture door while
    the coffee machine is in use. Ensure the coffee machine has cooled
    down completely before closing the furniture door.

     Repairs may only be carried out by a Miele authorised service

    technician. Repairs by unqualified persons can cause considerable
    danger to the user.

     The coffee machine must be disconnected from the electricity
    supply during repair work.

     While the machine is under guarantee, repairs should only be

    undertaken by a Miele authorised service technician. Otherwise the
    guarantee is invalidated.

     Faulty components must only be replaced by genuine Miele

    Original spare parts. The manufacturer can only guarantee the safety
    of the machine when Miele replacement parts are used.

     Never open the outer casing of the machine. Tampering with

    electrical connections or components and mechanical parts is highly
    dangerous to the user and can cause operational faults or electric
    shock.

    10



  • Page 11

    Warning and Safety instructions
     Only use genuine original Miele accessories with this machine.
    Using spare parts or accessories from other manufacturers will
    invalidate the guarantee, and Miele cannot accept liability.

    11



  • Page 12

    Warning and Safety instructions
    Plumbed in water connection
     Do not connect the coffee machine to a hot water supply.
     The stopcock must be easily accessible after the coffee machine
    has been built in.

     The protective sleeve of the water inlet hose must not be
    damaged or become kinked.

     The integrated water protection system offers protection from
    water damage, provided the following conditions are met:

    – the coffee machine is correctly installed, connected to the
    electricity supply and plumbed in.
    – if a fault is identified, the machine must be repaired immediately.
    – the stopcock is turned off when the machine is not used for a
    longer period of time (e.g during holidays).

    12



  • Page 13

    Warning and Safety instructions
    Correct use
     The spouts present a danger of burning or scalding.
    The liquids and steam dispensed are very hot.

     Please note:
    – Keep well away from the area underneath the spouts when hot
    liquids and steam are being dispensed.
    – Do not touch hot components.
    – Hot liquid or steam could spatter from the spouts. Ensure that the
    central spout is clean and fitted correctly.
    – Water in the drip tray can also be very hot. Take care when
    emptying it.
     Never look directly at the lighting or use optical instruments to
    look at it.

     Please note the following regarding water:
    – When using the water container: Only use cold, fresh tap water to
    fill the water container. Warm or hot water or other liquids can
    damage the coffee machine.
    – Change the water every day to prevent a build-up of bacteria.
    If the machine is connected to the mains water supply: Empty the
    water container once a day.
    – Do not use mineral water. Mineral water will cause serious
    limescale deposits to build up in your machine and damage it.
    – Do not use water from a reverse osmosis unit in this machine.
    This would damage it.

     Only fill the bean container with roasted espresso/coffee beans.
    Do not fill the bean container with coffee beans which have been
    treated with additives or with ground coffee.
    Do not fill the bean container with any type of liquid.

    13



  • Page 14

    Warning and Safety instructions
     Do not use green (unroasted) coffee beans or mixtures of coffee

    beans which contain green coffee beans. Green coffee beans are
    very hard and still contain a certain amount of residual moisture.
    These can damage the coffee machine grinder as soon as grinding
    begins.

     Do not use coffee beans which have been treated with caramel,
    sugar or other substances including sugary liquids. Sugar will
    damage the coffee machine.

     Only add ground coffee or the Miele cleaning tablets for
    degreasing the brew unit to the ground coffee chute.

     Do not use any caramelised ready ground coffee. The sugar in the

    coffee will stick to and block the brew unit of the coffee machine.
    The cleaning tablets for degreasing the brew unit will not remove this
    type of deposit.

     Only use milk without additives. Additives in milk usually contain
    sugar and this will stick to the milk pipework.

     If using dairy milk make sure that it has been pasteurised.
     Do not place any alcohol mixtures which are alight underneath the
    central spout. The flames could ignite plastic components and
    cause them to melt.

     Do not swing from or hang anything on the machine front when it
    is open as this could damage the hinges on the coffee machine.

     The central spout connector cap is lubricated with silicone

    grease. Take care not to get this on your clothes when removing or
    replacing the containers or other components.

     The machine must not be used for cleaning objects.

    14



  • Page 15

    Warning and Safety instructions
    Cleaning and care
     The coffee machine must be disconnected from the electricity
    supply before cleaning or maintenance.

     Clean the coffee machine and the milk flask thoroughly before
    using for the first time (see "Cleaning and care").

     All parts of the milk system need to be cleaned thoroughly and
    regularly. Milk contains bacteria which proliferate rapidly with
    inadequate cleaning.

     Do not use a steam cleaner to clean this machine. Steam could
    reach electrical components and cause a short circuit.

     Descale the coffee machine regularly depending on the water

    hardness level in your area. Descale the machine more frequently in
    areas with very hard water. Miele cannot be held liable for damage
    arising from insufficient descaling, the use of incorrect descaling
    agent or the use of descaling agent which is not of the appropriate
    concentration.

     Degrease the brew unit regularly with Miele cleaning tablets.

    Depending on the natural oil content of the coffee used, the brew
    unit can become blocked quite quickly.

     Used coffee grounds should be disposed of with the organic

    rubbish or on the compost heap. Do not empty them down the sink,
    as they could block it.

    15



  • Page 16

    Warning and Safety instructions
    For machines with stainless steel surfaces:
     Do not use sticky notes, transparent adhesive tape, masking tape
    or other types of adhesive on stainless steel surfaces. These
    damage the surface, causing it to lose its dirt repellent protective
    coating.

     The finish on stainless steel surfaces is susceptible to scratching.
    Even magnets can cause scratching.

    16



  • Page 17

    Guide to the machine
    Exterior view

    a On/Off sensor 
    b Controls and display
    c Handle
    d Hot water spout
    e Drip tray cover
    f Height-adjustable central spout with lighting
    g Milk flask and lid

    17



  • Page 18

    Guide to the machine
    Interior view

    h Ground coffee chute cover
    i Brew unit
    j Ground coffee chute
    k Slide control to select fineness of ground coffee
    l Coffee bean container
    m Water container with inlet device
    n Drip tray with grid
    o Waste container
    p Drip catcher
    q Central spout connector
    r Maintenance panel

    18



  • Page 19

    Controls and display

    a On/Off sensor 
    For switching the coffee machine on
    and off

    g OK sensor
    For confirming display messages and
    saving settings

    h Profiles 
    b Drink sensors
    For saving and editing profiles
    For making Espresso , Coffee ,
    Cappuccino  or Latte macchiato 
    i Settings 
    c Further programmes 
    For altering settings, displaying
    information or checking which
    Other drinks such as Long coffee,
    settings are currently active
    Caffè latte, hot milk, milk froth and
    hot water,
    j Two portions 
    Maintenance menu
    For making two portions of a drink
    d Display
    k Parameters 
    Shows information about the current
    Settings for checking or altering
    action or status
    coffee preparation
    e Back 
    l Optical interface
    For returning to the previous menu,
    (for Miele service technician use only)
    cancelling unwanted actions
    f Arrow sensors 
    For displaying further options and
    highlighting a selection

    19



  • Page 20

    Accessories
    These products and other useful
    accessories can be ordered via the
    internet, from Miele (see back cover for
    contact details) or from your Miele
    dealer.

    – Angled connector for milk
    pipework
    Replacement part

    Optional accessories
    Miele accessories and cleaning and
    conditioning products are available for
    your coffee machine.

    Accessories supplied
    – Measuring spoon
    for ground coffee
    – Milk flask with lid
    for storing milk and heating/frothing
    milk
    – Cleaning agent for milk pipework
    for cleaning the milk system (Starter
    set)
    – 2 containers (large and small)
    for cleaning and maintenance of the
    machine
    – Descaling tablets
    for descaling the water pipework
    (Starter set)
    – Cleaning tablets
    for degreasing the brew unit
    (Starter set)
    – Test strips
    for determining the water hardness
    level
    – Silicone grease
    for lubricating the cap on the central
    spout connector
    – Cleaning brush
    for cleaning the milk pipework
    – Central spout connector cap
    Replacement part
    20

    – Microfibre cloth
    for removing finger marks and light
    soiling
    – Milk flask with lid
    for storing milk and heating/frothing
    milk
    – Small lid
    For storing the milk flask in the fridge
    – Cleaning agent for milk pipework
    for cleaning the milk system
    – Descaling tablets
    for descaling the water pipework
    – Cleaning tablets
    for degreasing the brew unit
    – Silicone grease
    for lubricating the cap on the central
    spout connector



  • Page 21

    Using for the first time
    Please read the operating
    instructions carefully and take the
    time to familiarise yourself with the
    coffee machine before using it for
    the first time.

    Before using for the first time
     Install the coffee machine and
    connect it to the electricity supply
    (see "Electrical connection" and
    "Installation").
     Remove any protective foil.
    Clean the machine thoroughly before
    filling it with water and coffee beans
    (see "Cleaning and care").

    Switching on for the first time
    When you switch the coffee machine
    on for the first time, after the welcome
    screen has appeared you will be
    prompted to set the following:

    Select language
     Use the arrow sensors  to
    highlight the required language.
    Touch OK.
     Use the arrow sensors  to
    highlight the required country.
    Touch OK.
    The setting is now saved.
    Setting the time
     Use the arrow sensors  until the
    current time of day appears.
    Touch OK.
    The setting is now saved.
    Setting the date
     Use the arrow sensors  until the
    current date is set.
    Touch OK to confirm the year, month
    and day.
    The setting is now saved.

    – Language and country
    – Date
    – Time
    – Display (Time of day display)
     Touch the On/Off sensor .
    The welcome message Miele Willkommen will appear in the display
    briefly.

    21



  • Page 22

    Using for the first time
    Display
    You can choose from the following
    options:


    On: The time and date are always
    visible in the display when the
    machine is switched off.



    Off: The display is dark when the
    machine is switched off.



    Night dimming: The date and the time
    are only displayed between the hours
    of 5:00 and 23:00.

     Use the arrow sensors  to
    highlight the required language.
    Touch OK.
    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.
    Selecting the water supply (Mains
    water)
    The coffee machine is intended to be
    plumbed into the mains water supply.
    You can select one of the following
    options:


    On: The water container will be filled
    automatically via the mains water
    supply.



    Off: The water container must be
    filled manually. A message to this
    effect will appear in the display.

     Select the water supply option you
    want with the  arrows and
    touch OK.
    The setting is now saved.
    The coffee machine is now successfully
    set up for use.
    22

     Fill the water container with fresh,
    cold tap water.



  • Page 23

    Using for the first time
    Water hardness

    Measuring the water hardness level

    The water hardness level indicates how
    much calcium is dissolved in the water.
    The higher the calcium content, the
    harder the water, and the harder the
    water, the more often the coffee
    machine will need to be descaled.

    You can determine the water hardness
    yourself using the enclosed test strip.
    Alternatively, your local water authority
    will be able to tell you the hardness of
    water in your area.

    The coffee machine measures the
    amount of water used and steam made.
    Depending on the level of water
    hardness set, more or fewer drinks can
    be dispensed before the machine
    needs to be descaled.
    Programme the coffee machine to the
    water hardness level of your area so
    that it functions correctly and does not
    get damaged. A prompt to descale the
    machine will then appear in the display
    at the correct time.
    The machine has four programmable
    levels:
    Water hardness

    Local
    water
    hardness
    level

    Setting (water
    hardness
    level)

    0 - 8.4 °dH
    (0 -1.5 mmol/l)

    Soft

    Soft 1

    8.4 - 14 °dH
    (1.5 - 2.5 mmol/l)

    Medium

    Medium 2

    14 - 21 °dH
    (2.5 - 3.7 mmol/l)

    Hard

    Hard 3

    > 21 °dH
    (> 3.7 mmol/l)

    Hard

    Very hard 4

     Dip the test strip in your drinking
    water for approximately one second,
    then shake off any excess water. The
    result will be evident after about
    a minute.
    Setting the water hardness level
     Touch .
     Select Water hardness with the arrow
    sensors  and touch OK.
     Use the arrow sensors  to
    highlight the required water hardness.
    Then touch OK.
    The setting is now saved.

    23



  • Page 24

    Operation
    To operate the coffee machine, touch
    the sensors with your finger.

    Exiting a menu or cancelling
    an action

    You are in the drinks menu when the
    display shows:

    To exit the current menu, touch .

     Miele
    Select drink

    To make a drink, touch one of the
    drinks sensors.
    You can find more drinks in the Further
    programmes  menu.

    Selecting a menu and
    navigating within a menu
    To select a menu, touch the relevant
    sensor. You will then be able to start an
    action or change settings in the menu.

    Settings
    Language 
    Time
    Date
    A bar on the right-hand side indicates
    that further options or text are available.
    Use the arrow sensors  to show
    these.
    The setting which is currently selected
    will have a tick  beside it.
    To select an option, touch the arrow
    sensors  until the option you want
    is highlighted.
    Touch OK to confirm your selection.
    24



  • Page 25

    Filling the water container
     Change the water every day to
    prevent a build-up of bacteria.
    If the coffee machine is plumbed into
    the mains drinking water supply, the
    water container will fill automatically as
    soon as the machine is switched on.
    The inlet device in the lid ensures that
    the water is taken in slowly.
    If the coffee machine has not been
    used to make any drinks for a long
    time there will be water left in the
    inlet hose.
    This can impair the taste of the
    coffee.
    Discard the first full container of
    water.

     Open the front of the coffee machine.

    You can also fill the container manually
    if you are not using the plumbed in
    water supply (see "Settings - Mains
    water connection")
    If filling the water container manually:
    Only use fresh, cold tap water.
    Hot or warm water or other liquids
    can damage the coffee machine.
    Do not use mineral water. Mineral
    water will cause serious limescale
    deposits to build up in your machine
    and damage it.

     Pull the water container forwards to
    remove it.
     Take off the lid and fill the water
    container with fresh, cold tap water
    up to the "max." mark.
     Push the water container into the
    machine until it clicks into place.
    If the water container protrudes
    slighlty or is a little high, check
    whether the surface that the water
    container sits on is dirty. If the water
    container is not positioned correctly,
    the outlet valve will not connect
    properly and could leak. Clean the
    surface, if necessary.

    25



  • Page 26

    Filling the coffee bean container
    Fill the coffee bean container with
    roasted coffee or espresso beans if you
    want to use freshly ground coffee
    beans for each cup of espresso or
    coffee.
    Alternatively, you can make coffee or
    espresso with ready ground coffee (see
    "Making coffee or espresso using ready
    ground coffee").

    Tip: You can use a nut or seed grinder
    to grind green coffee beans. These
    types of grinder generally have a
    rotating stainless steel blade. You can
    then add the ground green coffee one
    portion at a time to the ground coffee
    chute and make the desired coffee
    drink (see "Making espresso and coffee
    using ready ground coffee").

    Warning. Risk of damage to the
    grinder.
    Only put roasted coffee or espresso
    beans in the container. Anything
    else, including ground coffee, will
    damage the grinder.
    Do not fill the bean container with
    any type of liquid.
    Warning. Sugar will damage the
    coffee machine.
    Do not use coffee beans that have
    been treated with sugar, caramel or
    other substances and do not put
    liquids containing sugar in the coffee
    bean container.
    Do not use green (unroasted) coffee
    beans or mixtures of coffee beans
    which contain green coffee beans.
    Green coffee beans are very hard
    and still contain residual moisture.
    These can damage the coffee
    machine grinder as soon as grinding
    begins.

    26

     Pull out the coffee bean container.
     Push back the lid and fill the
    container with roasted coffee beans.
     Slide the lid back into place.
     Push the coffee bean container fully
    back into the coffee machine. Close
    the front.



  • Page 27

    Switching on and off
    Switching on

    Switching off

    When the coffee machine is switched
    on, it heats up and rinses the pipework.
    This not only cleans the pipework, but
    also warms it before coffee is prepared.

     Touch the On/Off sensor .

    If the coffee machine still has an
    operating temperature higher than
    60 °C, then rinsing will not take place.
     Touch the On/Off sensor .
    The machine will begin rinsing after the
    heating-up phase. Hot water will come
    out of the central spout.
    You can now make drinks.

    If coffee has been dispensed, the
    coffee machine will rinse the coffee
    pipework automatically before
    switching off.

    Switching off for longer
    periods of time
    If the coffee machine is not going to be
    used for a longer period of time:
     Empty the drip tray, the waste
    container and the water container.

    Tip: If you do not want the water from
    the rinsing process to flow into the drip
    tray, place a suitable container (e.g. the
    small cleaning container) underneath
    the central spout before making the first
    coffee of the day.

     Clean all components thoroughly,
    including the brew unit, the central
    spout connector and the drip catcher
    in the machine front.
     Switch off the machine.
    If you are leaving the front open
    while the coffee machine is not being
    used for a long time, disconnect it
    from the mains electricity supply to
    save energy.

    27



  • Page 28

    Adjusting the central spout to the correct cup height
    You can adjust the central spout to suit
    the height of the cup you are using so
    that the coffee or espresso will not cool
    down as quickly and the crema will
    have a better consistency.

     Pull the central spout down until it is
    at the same level as the rim of the
    cup.
    Alternatively, push the central spout
    up until there is enough room to fit a
    larger cup or mug underneath.

    28



  • Page 29

    Making drinks
     The spouts present a danger of

    Making a coffee

    burning or scalding.
    The liquids and steam dispensed are
    very hot.
    Keep well away from the area
    underneath the spouts when hot
    liquids and steam are being
    dispensed.
    Do not touch hot components.
    The following drinks can be made:
    – Espresso . This is a strong,
    aromatic coffee with a thick hazelnut
    brown coloured layer of froth - known
    as the crema - on top.
    When making espresso, use
    espresso roast coffee beans.
    – Coffee . This differs from espresso
    by the increased amount of water
    and the roast of the beans.
    Use coffee beans of the correct roast
    to make coffee.
    – Long coffee  is a coffee with
    considerably more water.

     Place a cup under the central spout.
     Touch the sensor for the drink you
    want:
     Espresso
     Coffee
     in Further programmes: Long coffee
    The coffee or espresso will be
    dispensed from the central spout into
    the cup.
    To ensure that any coffee residues
    from the factory testing process are
    removed from the brewing system,
    please throw away the first two cups
    of coffee when using the coffee
    machine for the first time.

    29



  • Page 30

    Making drinks
    Making two portions

    Cancelling preparation

    You can dispense two portions of
    espresso or coffee at once either into
    one cup or two separate cups.

    Drink preparation can be cancelled
    while Stop is showing in the display.

    To fill two cups at the same time:

     Place a cup under each of the coffee
    dispensers in the central spout.
     Touch .
    The  sensor will light up.
     Touch the sensor for the drink you
    want.
    Two portions of the desired drink will be
    dispensed from the central spout.
    After a while, if you have not touched
    one of the drinks sensors, the "Two
    portions"  option will revert to single
    portions.

    30

     Touch OK.
    When making two portions at once
    touching the OK sensor once will only
    stop the first drink.
    To stop both drinks, touch OK for
    longer.



  • Page 31

    Making drinks
    Dispensing several cups of
    coffee one after the other Coffee pot
    You can make several cups of coffee
    one after the other automatically with
    the Coffee pot function (max. 1 litre). Up
    to eight cups can be made in this way.
    You can use the Coffee pot function
    twice in a row. After this the coffee
    machine will need a longer cooling
    down time of an hour in order to avoid
    it being damaged.
     Place a sufficiently large container
    under the central spout.
     Touch .
     Use the arrow sensors  to
    highlight Coffee pot.
    Touch OK.
     Use the arrow sensors  to
    highlight the number of cups you
    want (3 to 8). Touch OK.
     Follow the instructions in the display.

    cup of decaffeinated coffee, for
    example, even though the coffee bean
    container is filled with roasted coffee
    beans.
    The coffee machine will recognise
    automatically that ready ground coffee
    has been added to the ground coffee
    chute.
    Only one portion of coffee or espresso
    can be made at a time when using
    ground coffee.
    Adding ground coffee
    Do not add more than one level
    scoop of ground coffee to the coffee
    chute. If too much is added, the
    brew unit will not be able to process
    the coffee.
    The coffee machine will use all the
    ground coffee which has been added to
    the chute to make the next coffee.
    Use the measuring spoon supplied so
    that the correct amount is used.

    The coffee for each cup is individually
    ground, brewed and dispensed. Each
    stage of the process is shown in the
    display.
    You can cancel the process at any time
    by:
     Touching OK or .

    Making coffee with ground
    coffee
    To make coffee using ready ground
    coffee, add a portion of ground coffee
    to the ground coffee chute.
    This gives you the option of making a
    31



  • Page 32

    Making drinks
     Open the front of the coffee machine.

    Making coffee with ground coffee
    If you want to make a drink with ground
    coffee:
     Select Yes with the arrow
    sensors . Touch OK.
    You can now select which type of drink
    you would like to make with ground
    coffee.
     Place a cup under the central spout.
     Select the type of coffee you want.

     Remove the cover to the ground
    coffee chute and open the lid.

    The coffee machine will now make the
    drink you have chosen.

     Add one level spoon of ready ground
    coffee to the chute.

    If you do not want to use ground coffee
    to make the drink:

     Close the lid. Push the cover into the
    machine. Close the front.

     Select No with the arrow sensors 
    and touch OK.

    Use ground coffee?

    display.

    will appear in the

    The ground coffee will be directed into
    the waste container.
    If no drink is selected within approx.
    15 seconds, the ground coffee will
    also be directed into the waste
    container.

    32



  • Page 33

    Making drinks
    Drinks with milk
     Danger of burning and scalding

    on the central spout.
    The liquids and steam dispensed are
    very hot.
    Do not use milk with additives. Most
    additives contain sugar which will
    stick to the milk pipework and
    damage the machine.
    If using dairy milk make sure that it
    has been pasteurised.

    Notes on the milk flask
    Milk is not cooled in the milk flask.
    Therefore, place the milk flask in the
    refrigerator if you are not going to use
    milk for a while. Good milk froth can
    only be achieved when cold milk
    below 10 °C is used.

    The following drinks with milk can be
    made:
    – Cappuccino  consisting of approx.
    2/3 milk froth and 1/3 espresso.
    – Latte macchiato  consisting of 1/3
    each of hot milk, milk froth and
    espresso.

    a Lid

    – Caffè latte  consisting of hot
    milch and espresso.

    c Milk suction tube

    Hot milk or milk froth can also be
    made.

    b Sensor
    d Glass flask
     Fill the milk flask with milk up to max.
    2 cm below the rim. Close the milk
    flask with the lid.
    It is important to keep the opening
    and neck of the milk flask clean
    (whilst filling it and carrying it). If the
    flask is dirty it could cause a fault in
    the machine.

    33



  • Page 34

    Making drinks
    Dispensing hot water
    Danger of burning and scalding on
    the hot water spout. The water
    dispensed is very hot.
    Please note that the water dispensed
    is not hot enough for making tea.
     Place a suitable container underneath
    the hot water spout.
     Push the milk flask fully back into the
    coffee machine.

     Touch .

    Making drinks with milk

     Touch the arrow sensors  until
    Hot water is highlighted. Touch OK.

     Place a suitable container underneath
    the central spout.

    Hot water is dispensed into the
    container under the spout.

     Touch the sensor for the drink you
    want:
     Cappuccino
     Latte macchiato
     in Further programmes: Caffè Latte,
    hot milk, milk froth

    To cancel preparation:

    The selected drink will now be made.

    34

     Touch OK.
    Preparation of hot water will be
    cancelled.



  • Page 35

    Making drinks
    Making drinks using a profile

    After making drinks

    If you have already created a specific
    user profile, you can select this before
    you make a drink.

    If you have made a drink with milk, Start
    rinse cycle will appear in the display after
    a while.

     Touch .

     Touch OK.

     Touch Select profile.

    The milk pipework will now be rinsed.

     Touch the arrow sensors  until
    the profile you want is highlighted.
    Touch OK.
    The name of the profile selected will be
    shown in the top left of the display.

    Even if you do not confirm the
    message with "OK", the coffee
    machine will rinse the milk pipework
    after a few minutes automatically.

    You can now make the drink you want.

    Tip: Remove the milk flask and rinse
    the lid under running water. Then fit the
    small lid to the milk flask and store the
    flask in the fridge until it is needed
    again.
    You can only achieve good quality milk
    froth with milk which is cold (< 10 °C).
    The small milk flask lid is available to
    order from your Miele Dealer, Miele or
    via the internet at www.mieleshop.com.

    35



  • Page 36

    Coffee the way you like it
    To set the coffee machine up for the
    type of coffee you are using, you can
    – change the grinder setting,
    – change the amount of coffee,
    – set the brewing temperature, or
    – pre-brew the ground coffee.

    Grinder setting

    To avoid damaging the grinder,
    please note the following:
    Only adjust the grinder one setting at
    a time.
    Grind the coffee beans again if you
    want to adjust the grinder to the next
    setting.
     Open the front of the coffee machine.

    When the beans are ground correctly,
    the coffee or espresso will flow evenly
    into the cup with a good crema.
    The crema should have an even nutbrown colour.
    The grinder setting you select will be
    used for all coffee drinks.
    There are various ways to tell whether
    the coffee grinder is set correctly.
    The coffee has been too coarsely
    ground if:
    – Espresso or coffee flows into the cup
    too quickly.
    – The crema is very pale and uneven.
    Set a finer grinder setting.
    The coffee has been too finely ground
    if:
    – Espresso or coffee only trickles into
    the cup.
    – The crema is dark brown.
    Set a coarser grinder setting.

    36

     Push the slide control one setting to
    the left (for finer grinding) or one
    setting to the right (for coarser
    grinding).
     Close the front.
     Make one cup of coffee.
    Adjust the grinder setting again.
    The altered grinder setting will not be
    used until after the second coffee has
    been dispensed.



  • Page 37

    Coffee the way you like it
    Displaying and changing the
    parameters of a drink
     Touch .
     Select the drink you want and touch
    OK.

    The setting is now saved.
    Tip: If the coffee is too strong for you or
    it tastes bitter, try a different type of
    bean.

    The current settings for the amount of
    coffee, brewing temperature and prebrewing will be displayed for this drink.
    Amount of coffee
    The coffee machine can grind and brew
    6-14 g of coffee beans per cup. The
    greater the quantity, the stronger the
    coffee.
    There are various ways to tell whether
    the amount of coffee is set correctly.
    The amount of coffee is too low if:
    – Espresso or coffee flows into the cup
    too quickly.
    – The crema is very pale and uneven.
    – The espresso or coffee lacks body.
    Increase the amount of coffee so that
    more ground coffee is brewed.
    The amount of coffee is too high if:
    – Espresso or coffee only trickles into
    the cup.
    – The crema is dark brown.
    – The espresso or coffee tastes bitter.
    Decrease the amount of coffee so that
    less ground coffee is brewed.
     Select Amount of coffee and then
    touch OK.
     Use the arrow sensors  to change
    the amount. Touch OK.
    37



  • Page 38

    Coffee the way you like it
    Brewing temperature

    Pre-brewing the coffee

    The ideal brewing temperature will
    depend on

    When the pre-brewing function is
    switched on, the freshly ground coffee
    is first moistened with a little hot water.
    Then the remaining water is forced
    through the moistened coffee at high
    pressure. This helps release the flavour
    of the coffee.

    – the type of coffee being used,
    – whether an espresso or a coffee is
    being made, and
    – the altitude of the region.
    If the coffee machine is located at more
    than 2000 metres above sea level, the
    brewing temperature needs to be set
    lower due to the change in pressure.
    This is because the boiling point for
    water at a high altitude above sea level
    is lower than the boiling point for water
    at sea level.
    Tip: Not all types of coffee can
    withstand high temperatures. Certain
    types are too delicate - the crema on
    top would not be as good and the taste
    would be impaired.
    The coffee machine has five brewing
    temperatures.
     Select Brew temperature and then
    touch OK.
     Select the required temperature and
    touch OK.
    The setting is now saved.

    38

    You can set pre-brewing for a short or
    long length of time, or deselect " Prebrewing " altogether.
    The machine is supplied with the "Prebrewing" function switched off.
     Touch the arrow sensors  until
    Pre-brewing is highlighted. Touch OK.
    The pre-brewing option which is
    currently selected will be marked with a
    tick .
     Touch the arrow sensors  until
    the setting you want is highlighted.
    Touch OK.
    The setting is now saved.



  • Page 39

    Portion size
    The flavour of the coffee produced
    depends not just on the type of coffee
    used, but also on the amount of water
    used. You can programme the amount
    of water to suit the size of your cups
    and the type of coffee you are using.
    For coffee drinks that use milk, in
    addition to the amount of espresso or
    coffee, you can also set the amount of
    milk or milk froth to be dispensed. You
    can also set the portion sizes for hot
    milk and milk froth separately.
    Each type of drink has a maximum
    portion size that can be programmed
    into the machine. The coffee machine
    halts preparation of the coffee once this
    portion size has been reached. The
    maximum possible portion size for this
    type of drink is then saved in the
    machine.
    The changed portion size is always
    saved in the current Profile. The name
    of the current profile appears in the
    top left-hand side of the display.
    There are two ways to start
    programming the portion amount:
    – Either by touching the drink sensor
    when you are making a coffee, or

    Changing the portion size
    while making a drink
    You can change and save the portion
    size for Espresso , Coffee ,
    Cappuccino  and Latte macchiato 
    while making these drinks.
     Place a cup under the central spout.
     Touch the sensor for the drink you
    want until Change appears in the
    display.
    The desired drink will be made and
    Save will appear in the display.
     When the cup is filled up to the level
    you want, touch OK.
    If you want to change the portion size
    for coffee specialities made with milk
    (e.g. Cappuccino), the ingredients
    (components) which make up the drink
    will be saved one after the other while
    the drink is being made.
     When the quantity for each ingredient
    reaches the level you want,
    touch OK.
    The programmed mix of ingredients
    and portion sizes will now be dispensed
    every time that particular drink is
    selected.

    – By selecting Portion size in the
    Parameters  menu.
    Tip: You can cancel the portion size
    programming as long as Stop is visible
    in the display.
    If the water container becomes empty
    whilst making a drink, the machine will
    stop programming the portion size.
    The portion size will not be saved.
    39



  • Page 40

    Portion size
    Changing the portion sizes in
    the Parameters  menu
    You can only change the portion sizes
    for Long coffee, Caffè Latte, hot
    milk and milk froth via the
    "Parameters" menu.

    Changing the portion size for
    different profiles
    You can set the portion size for
    individual drinks for each profile.
     Touch .
     Select the profile you want.

     Place a suitable container underneath
    the central spout.

    The name of the current profile is
    shown in the top left of the display.

     Touch .

    You can now change the portion size of
    the individual drinks as described
    previously.

     Select the drink you want.
     Select Portion size and touch OK.
    Now proceed as for changing the
    portion size while making a drink.

    40



  • Page 41

    Profiles
    In addition to the Miele profile, you can
    enter individual profiles to cater for
    different tastes and preferences.

    Creating a profile

    In each profile you can adjust the
    settings for individual drinks (portion
    size, amount of coffee, brewing
    temperature and pre-brewing).

    Letters will appear in the display that
    you can select with the arrow sensors.
    You can use the arrow sensors to select
    from numbers, upper case and lower
    case letters.

    The name of the current profile is
    shown in the top left of the display.

    Opening a profile
     Touch .
    You can now create a profile.
    If you have allocated a profile in
    addition to the Miele profile, you have
    the following options:
    – Select profile from the profiles which
    are already allocated.
    – Change name if you want to alter
    the name of a profile.
    – Delete profile if you want to delete a
    profile.
    – Change profile to programme the
    coffee machine so that it changes
    back to the Miele standard profile
    automatically after each drink is
    dispensed or so that it retains the
    most recently selected profile.
    Tip: Touch  or  to return to the main
    menu.

     Select Create profile with the arrow
    sensors  and touch OK.

     Touch the arrow sensors  to
    select the first character and then
    touch OK.
    The character you have chosen will
    appear in the top line of the display.
     Repeat the process until the name
    required appears in the top line of the
    display.
    Tip: If you make a mistake you can
    delete the last character with the 
    sensor.
    When you have finished entering a
    name and want to save it,
     use the arrow sensors  to
    highlight the tick  and touch OK.
    If you do not want to save your entry:
     touch and hold  until all characters
    have been deleted and the previous
    menu appears in the display.
    The last created profile is selected as
    the current profile.

    41



  • Page 42

    Profiles
    Selecting a profile
    This selection is only possible if a
    profile has been allocated in addition
    to the Miele standard profile.
     Touch the arrow sensors  until
    Select profile is highlighted. Touch OK.
     Select the required profile with the
    arrow sensors  and touch OK.
    The name of the current profile is
    shown in the top left of the display.
    Changing the name
    This selection is only possible if a
    profile has been allocated in addition
    to the Miele standard profile.
     Touch the arrow sensors  until
    Change name is highlighted.
    Touch OK.
     Now proceed as described in
    "Creating a profile":
    – Select  to delete a character,
    – To enter new characters, select the
    relevant character and confirm OK.
    – Save the new name by selecting  in
    the display and touching OK.

    42

    Deleting a profile
    This selection is only possible if a
    profile has been allocated in addition
    to the Miele standard profile.
     Touch the arrow sensors  until
    Delete profile is highlighted and
    touch OK.
     Use the arrow sensors to select the
    profile you want to delete.
     Touch OK.
    A tick  will appear beside the profile
    and after a short while the profile will be
    deleted.



  • Page 43

    Profiles
    Changing a profile
    You can programme the coffee machine
    so that it changes back to the Miele
    profile automatically after each drink
    has been dispensed, so that the Miele
    profile is always active when the
    machine is switched on or so that it
    retains the most recently selected
    profile.
     Select Change profile and then touch
    OK.
    You now have the following options:


    Manually:

    The currently selected
    profile will remain active until you
    select another profile.



    After each use: The machine will
    change back to the Miele profile
    automatically after a drink is
    dispensed.



    When switched on:

    Each time the
    machine is switched on it will
    automatically select the Miele profile
    regardless of which profile was
    selected before the machine was last
    switched off.

     Select the required option and touch
    OK.

    43



  • Page 44

    Settings
    Opening the Settings menu

    Changing and saving settings

     Touch .

     Touch .

    You can now check or make alterations
    to settings.

     Select the setting you wish to change
    with the arrow sensors  and
    touch OK.

    Options which are currently selected
    will have a tick  next to them.
    Touch  if you want to access the
    previous menu.
    Touch  to return to Select drink.
    Tip: If you have switched on the time of
    day display or selected Night dimming,
    you can alter settings without switching
    the coffee machine on by touching .

    44

     Use the arrow sensors  to
    highlight the required option.
    Then touch OK.
    The setting is now saved.



  • Page 45

    Settings
    Possible setting options
    The factory default for each option has a * next to it.
    Option

    Available settings

    Language 

    deutsch*

    English and other languages

    Country
    Time

    Show



    Off*

    / On / Night dimming

    Clock format



    12 h

    / 24 h*

    Set
    Date

    Set

    Timer

    Timer 1



    Set



    Days of the weekDays of the week: Monday



    : Switch on at / Switch off after (0:30)* / Switch off at

    Wednesday

    Activate
    No*)

    / Tuesday /
    / Thursday / Friday / Saturday / Sunday

    : Switch on at (Yes / No*) / Switch off at (Yes /

    Timer 2





    Set

    : Switch on at / Switch off at

    Days of the week: Monday

    Thursday
    Activate
    No*)

    Eco mode

    On*

    Lighting

    Brightness

    / Tuesday / Wednesday /
    / Friday / Saturday / Sunday

    : Switch on at (Yes / No*) / Switch off at (Yes /

    / Off

    Switch off after

    45



  • Page 46

    Settings
    Option

    Available settings

    Info

    Number of drinks



    / Espresso / Coffee / Long coffee /
    / Latte macchiato / Caffè latte / Milk froth /

    Total no. of portions
    Cappuccino
    Hot milk

    / Hot water

    No. of uses until appliance needs descaling:
    No.of uses until brew unit needs degreasing:

    / Off*

    System lock 

    On

    Water hardness

    Soft
    Medium
    Hard*
    Very hard

    Display brightness

    Set the brightness

    Volume

    Buzzer tones
    Keypad tone

    / Off*

    Mains water

    On

    Showroom programme

    Demo mode (On

    Factory default

    Do not reset
    Reset

    46

    / Off*)



  • Page 47

    Settings
    Language

    Clock format

    You can select the language (and
    country variant of that language) for all
    display text.

    The options are:
    – 24-hour display (24 h)
    – 12-hour display (12 h)

    Tip: If you select the wrong language
    by mistake, you can find the
    "Language" option by following the flag
    symbol .

    Use the arrow sensors  to set the
    hours and minutes.

    Time

    Date

    You can set the time display, the clock
    format and the time.
    Display (Time of day display)
    You can choose from the following
    options:


    On: The time and the date will show
    in the display all the time, even when
    the coffee machine is switched off.



    Off: The time and the date will not
    show in the display when the coffee
    machine is switched off.



    Night dimming:

    The time and the date
    are displayed from 5:00 to 23:00.

    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.

    Setting the time

    Use the arrow sensors  to set the
    year, month and day.

    Timer
    There are two timers with the following
    functions:
    The coffee machine
    – switches on at a particular time, e.g.
    in the morning for breakfast (Switch on
    at),
    – switches off at a particular time
    (Switch off at),
    – switches off after a particular length
    of time if none of the sensors has
    been touched or a drink has not been
    made (Switch off after; Timer 1 only).
    You can allocate the timer functions to
    individual days of the week.
    For Switch on at and Switch off at, the
    timer must be activated and at least
    one day of the week allocated.

    47



  • Page 48

    Settings
    Selecting a timer
    The options are:
    – Timer 1: Switch on at, Switch off at,
    Switch off after

    – Timer 2: Switch on at, Switch off at
    Switch on at
    Please note that the coffee machine
    will not switch on at the required time
    if you have activated the system lock.
    Use the arrow sensors  to set the
    hours and minutes.
    If the coffee machine has switched
    itself on three times using the Switch on
    at timer function and no drinks have
    been dispensed, the machine will not
    switch itself on again automatically.
    This prevents the coffee machine from
    switching itself on unnecessarily, for
    example, whilst you are away on
    holiday.
    The programmed times will, however,
    remain in memory and will be
    reactivated after manually switching the
    machine on again.
    Switch off at
    Use the arrow sensors  to set the
    hours and minutes.
    In the event of a longer absence the
    programmed times will remain in
    memory and will be reactivated after
    manually switching the machine on
    again (see "Switch on at").

    48

    Switch off after
    The Switch off after timer function is
    only available in Timer 1.
    If none of the sensors have been
    touched or a drink has not been made,
    the coffee machine will switch itself off
    after 30 minutes to save energy.
    You can change this pre-setting using
    the arrow sensors  to a time of
    between 15 minutes and 9 hours.
    Allocating days of the week
    Select the day of the week you want.
    The selected day of the week will be
    marked with a .
    When all days of the week required are
    marked,
     touch the arrow sensor  repeatedly
    until Accept is highlighted. Touch the
    OK sensor.



  • Page 49

    Settings
    Activating and deactivating the timer

    Eco mode

    If you have selected On or Night dimming
    for the time display:
    when Switch on at is activated for the
    timer, the  symbol and the desired
    switching on time will appear in the
    display 23:59 hours before.

    Eco mode is an energy-saving mode.
    The steam system does not heat up
    until a coffee drink or steam for hot
    milk / milk froth is requested.

    If the system lock is activated, the
    Switch on at option for the timer cannot
    be selected.
    Select the required timer function. The
    timer function selected will be marked
    by a .

    If Eco mode is switched off, milk froth
    and hot milk, as well as coffee and
    espresso, can be made one after
    another. The steam system remains
    heated up and much more energy is
    used.
    A message regarding the altered energy
    consumption will appear in the display.

     Touch the arrow sensor  repeatedly
    until Accept is highlighted. Touch the
    OK sensor.

    49



  • Page 50

    Settings
    Lighting

    Info (display information)

    You have the following options:

    In the Info option, the number of
    portions made for each individual drink
    can be displayed.

    – You can set the brightness when the
    machine is switched on.
    – You can set the brightness when the
    machine is switched off.
    – You can specify when the lighting
    should switch off (Lighting: Switch off
    after).
    Set the brightness
    First select:
    – Appliance switched on
    – Appliance switched off
    Change the brightness using the arrow
    sensors .
    To switch off the lighting,
     touch the  arrow sensor until none
    of the segments is filled and Switched
    off appears.
    Setting the time the lighting switches
    off (Switch off after)
    You can adjust the length of time that
    the coffee machine remains lit up after
    switching off.
    Use the arrow sensors  to set the
    hours and minutes.
    When the coffee machine is switched
    on it remains lit up for 10 minutes after
    the last action. This time cannot be
    adjusted.

    50

    You can also see whether more than
    50 portions can be dispensed before
    the machine needs to be descaled or
    before the brew unit needs to be
    degreased (No. of uses until).
    To return to the previous display,
     touch OK.



  • Page 51

    Settings
    Locking the coffee machine
    (System lock )
    You can lock the coffee machine to
    prevent it being used without your
    knowledge, by children, for example.
    Activating and deactivating the
    system lock 
    When the system lock is activated, the
    Switch on at option for the timer is
    deactivated. The coffee machine will
    not switch on at the time set.

    Water hardness
    Please see "Using for the first time" for
    information about water hardness.

    Display brightness
    Change the display brightness using
    the arrow sensors .

    Volume
    You can set the volume of buzzer and
    keypad tones using the arrow
    sensors .

    Overriding the system lock 

    To switch the tones off:

    While the message Press the OK button
    for 6 seconds to unlock is in the display,

     touch  arrow sensor until none of
    the segments is filled and Switched off
    appears.

     touch the OK sensor for 6 seconds.
    As soon as you switch the coffee
    machine off, the system lock will be
    activated again and the coffee
    machine is locked.

    Activating and deactivating
    mains water connection
    The coffee machine is designed to be
    plumbed into the mains drinking water
    supply. Water is automatically taken
    into the water container when the
    machine is set up for a plumbed supply.
    If this option is switched off, the water
    container has to be filled manually.

    51



  • Page 52

    Settings
    Factory default
    You can reset the settings back to the
    ones which were set when the coffee
    machine was delivered - the factory
    default settings.
    The number of drinks and the appliance
    status (No. of uses until descaling, ...
    degreasing the brew unit) cannot be
    reset.
    Please refer to the "Possible setting
    options" chart for the factory settings.
    The following settings will not be
    reset:
    – Language
    – Time
    – Date

    52

    Demo mode (Showroom
    programme)
    Do not activate this setting for
    domestic use!
    The coffee machine can be
    demonstrated in the showroom using
    the Showroom programme. In this mode
    the machine lights up but drinks cannot
    be made or actions taken.
    If you activate the Demo mode, you
    cannot switch the appliance off with
    the On/Off sensor .



  • Page 53

    Cleaning and care
     Clean the coffee machine regularly to avoid a build-up of bacteria.
    Quick guide
    Recommended frequency

    What do I have to clean / maintain?

    Every day
    (at the end of the day)

    the milk flask and lid
    the water container
    the waste container
    the drip tray and the drip tray cover

    Once a week
    (or more often if badly soiled)

    the central spout
    the sensor cover
    clean the milk valve with the cleaning brush
    the interior
    the small drip catcher inside the front of the machine
    the brew unit
    the front of the machine (especially straight after descaling)

    Once a month

    lubricate the cap on the central spout connector
    the coffee bean container

    When prompted to

    the milk pipework (using the cleaning agent for milk
    pipework)
    the brew unit (degrease with the cleaning tablets)
    descale the machine

    53



  • Page 54

    Cleaning and care
    Cleaning by hand or in the
    dishwasher
    The following must be cleaned by hand
    only:
    – Central spout cover
    – Brew unit
    – Coffee bean container and the coffee
    bean container lid
    – Maintenance panel
    Some components of the coffee
    machine are dishwasher safe.
    However, cleaning these in the
    dishwasher frequently can cause
    them to become discoloured due to
    regular contact with food residues
    (e.g. tomatoes) in the dishwasher.
    The surface can also become
    damaged.
    The following components are
    dishwasher safe:
    – Drip tray and lid
    – Drip tray and grid
    – Drip tray cover
    – Water container
    – Waste container
    – Central spout (without stainless steel
    cover)
    – Milk flask and lid
    – Drip catcher

    54

     Danger of burning and scalding

    on hot components or by hot liquids.
    Always allow the coffee machine to
    cool down before cleaning it.
    Caution: Water in the drip tray can
    be very hot
    Do not use a steam cleaner to clean
    this machine. Steam could reach the
    electrical components and cause a
    short circuit.
    It is important to clean the machine
    regularly as the used coffee grounds
    will soon go mouldy. Sour milk deposits
    can block the milk pipework.
    The central spout connector cap is
    lubricated with silicone grease.
    Take care not to get this on your
    clothes when removing or replacing
    the containers or other components.



  • Page 55

    Cleaning and care
    All surfaces are susceptible to
    scratching. Scratches on glass
    surfaces could even cause a
    breakage. Contact with unsuitable
    cleaning agents can discolour the
    surfaces. Wipe up any spillages or
    splashes of descaling agent
    immediately.
    To avoid damaging the surfaces of
    your coffee machine, do not use:
    – cleaning agents containing soda,
    ammonia, acids or chlorides,
    – solvent-based cleaning agents,
    – cleaning agents containing descaling
    agents,
    – stainless steel cleaning agents,
    – dishwasher cleaner,
    – glass cleaning agents,
    – oven cleaner,
    – abrasive cleaning agents, e.g.
    powder cleaners and cream cleaners,
    – hard, abrasive sponges, e.g. pot
    scourers, brushes or sponges which
    have been previously used with
    abrasive cleaning agents,
    – melamine eraser blocks,
    – sharp metal tools.

    55



  • Page 56

    Cleaning and care
    Drip tray
     Danger of burning.
    If the rinsing process has just
    finished, wait a while before
    removing the drip tray as the water
    used for rinsing will run out of the
    coffee spouts.
    Clean the drip tray every day to
    prevent unpleasant odours and
    mildew.
    A prompt will appear in the display
    when the drip tray is full and needs to
    be emptied. Remove the tray and
    empty it at the latest when this prompt
    appears.

     Clean the metal contact discs and
    the space between them carefully.
    Dry everything thoroughly.
    The discs will not be able to detect
    that the drip tray is full if they are
    damp or dirty.
    Check this area once a week, if
    necessary.
     Clean the area underneath the drip
    tray.
     Push the drip tray back into the
    coffee machine.
    Make sure the drip tray has been
    pushed right into the machine as far
    as it will go.

     Open the machine front and carefully
    remove the drip tray from the
    machine.
    The grid in the drip tray prevents the
    water from spilling out of the tray
    when it is being carried.
     Clean the drip tray and the grid with
    hot water and a little washing-up
    liquid, or in the dishwasher and dry
    with a cloth.

    56



  • Page 57

    Cleaning and care
    Drip tray cover

    Water container

     Remove the drip tray cover.

    Change the water every day to prevent
    a build-up of bacteria.

     The drip tray cover can be cleaned in
    the dishwasher, or by hand using hot
    water and a little washing-up liquid.
     Dry the drip tray thoroughly.

    Make sure that the valve, the
    underside of the water container and
    the surface the water container sits
    on are clean. Otherwise the water
    container will not sit correctly.
     The water container can be cleaned
    in the dishwasher, or by hand using
    hot water and a little washing-up
    liquid. After cleaning, dry the water
    container.

     Refit the cover on the drip tray
    making sure it sits flush at the front.

     Carefully clean and dry the surface
    the water container sits on, taking
    special care to clean the recesses
    properly.

    57



  • Page 58

    Cleaning and care
    Waste container

    Central spout

    After a certain period of time a reminder
    to empty the waste container will
    appear in the display. The waste
    container must be cleaned when this
    message appears
    However, it is better to clean the waste
    container every day to prevent coffee
    grounds from turning mouldy.

    With the exception of the stainless steel
    cover, all parts of the central spout
    should be cleaned in the dishwasher at
    least once a week. This will remove
    coffee deposits effectively.

    There will probably also be some water
    in the waste container left over from the
    rinsing process.

    Clean the stainless steel spout cover by
    hand only using hot water and a little
    washing-up liquid.

     Clean the waste container with hot
    water and a little washing -up liquid
    or in the dishwasher, and dry with a
    soft cloth.
     Also thoroughly clean the now
    accessible area in the machine where
    the waste container sits.
     Push the central spout right down 
    and remove the cover by pulling it off
    towards you .

     Press catch  upwards, grasp the
    dispensing unit by the handle and
    pull this forwards and off .

    58



  • Page 59

    Cleaning and care

     Hold the unit at the sides and pull it
    forwards to release it.
    Tip: Place the dispensing unit vertically
    in the upper basket of the dishwasher.
    Place the connecting pieces and the
    dispensers in the cutlery tray.

     Turn upper connection piece  and
    pull it upwards to remove it. Remove
    lower connecting piece  in the
    same way.
     Pull off dispensers .
    The Y-piece connector must not be
    removed.

     Clean the surfaces of the central
    spout with a damp cloth.

     Clean all parts thoroughly.

    59



  • Page 60

    Cleaning and care
     Reassemble the dispensing unit in
    the reverse order. Make sure that
    upper connecting piece  clicks into
    position. Press the dispensers firmly
    into position  on the dispensing
    unit.

    Maintenance of the milk valve

     Replace the dispensing unit in the
    central spout.

     Use the  arrow sensor to select
    Maintenance. Touch OK.

     Then refit the cover.

     Select Condition milk valve and then
    touch OK.

    The milk valve should be cleaned once
    a week to ensure good quality milk
    froth.
     Touch .

    The central spout will move into the
    maintenance position.
    Important. You must remove the
    cleaning brush before confirming
    Quit maintenance position with OK.
    Otherwise the coffee machine will be
    damaged.

     Insert the brush in the milk valve and
    move it back and forth.
     Touch OK.
    The milk valve will move into the correct
    position and the milk pipework will be
    rinsed through.

    60



  • Page 61

    Cleaning and care
    Milk flask and lid
    Soiling can cause a fault in the
    machine.
    It is important to keep the neck and
    flange of the flask clean (whilst filling
    it and carrying it).

    Dismantling the milk flask lid and
    cleaning it with the cleaning brush
    Milk fat deposits can collect in the milk
    flask lid. These will cause the milk to
    sputter when milk froth is being made.

     Clean the milk flask holder on the
    coffee machine with a damp cloth.
     Clean the glass milk flask in the
    dishwasher or by hand using hot
    water and a little washing-up liquid.
    Dry the milk flask thoroughly.
    Before placing the lid of the milk flask
    in the dishwasher:

     Pull the milk suction tube  out of
    the milk flask lid. Ensure that you also
    remove seal  when doing this.
     Clean both under hot, running water.
    Insert the cleaning brush supplied
    into the stainless steel tube and
    move it back and forth until all milk
    deposits have been removed.

     Rinse the milk pipework in the lid
    under running water.
    If when doing this, no water runs out of
    the milk pipework ,
     dismantle the milk flask lid and clean
    it with the cleaning brush supplied.

    61



  • Page 62

    Cleaning and care
    Coffee bean container
     Take the coffee bean container out of
    the machine and then push the lid
    back to remove it.
     Clean the coffee bean container and
    the lid by hand using hot water and a
    little washing-up liquid and then dry
    them both thoroughly.
     Also use the cleaning brush to clean
    the milk pipework in the lid from
    above and below.
    To reassemble the lid:
     First insert the seal in the lid.

    Make sure you do not fit the slanted
    end of the milk intake tube into the
    seal. This would damage it.
     Fit the milk intake tube into the seal.

    62

     Replace the lid and push the
    container back into place in the
    machine.



  • Page 63

    Cleaning and care
    Interior and machine front

    Central spout connector

     First take out all removable parts and
    then clean the interior and the
    machine front with a mild solution of
    hot water and washing-up liquid.

    The part which connects the brew unit
    and the central spout is located on the
    inside of the machine front.

    Tip: Use your vacuum cleaner to
    remove dry ground coffee residues.
    A small drip catcher is located inside
    the front of the machine at the bottom.

     Clean this connection regularly with a
    damp cloth, taking care not to wipe
    the grease off the cap.

     Remove the drip catcher and clean it
    in the dishwasher or by hand using
    hot water and a little washing-up
    liquid.

     Lubricate the cap at least once a
    month with the silicone grease
    supplied.

    After cleaning, remember to replace
    the drip catcher in the coffee
    machine.

    63



  • Page 64

    Cleaning and care
    Brew unit
    Removing and cleaning the brew unit
    by hand
    Clean the brew unit by hand only
    using warm water. Do not use
    washing-up liquid. The moving parts
    of the brew unit are lubricated.
    Washing-up liquid will damage the
    brew unit.
    The brew unit can be removed for
    cleaning.
    It should be cleaned once a week.
     Open the front of the coffee machine.

    If you cannot remove the brew unit or
    can only do so with difficulty, the brew
    unit is not in the correct position (See
    "Problem solving guide").
    After taking the brew unit out of the
    machine do not change the position
    of the brew unit handle, as this
    would cause the brew unit to be out
    of alignment and you will not be able
    to push it back into the coffee
    machine.
     Clean the brew unit by hand under
    warm running water without using
    washing-up liquid.

     Remove the water container, waste
    container and the coffee chute cover.

     Press the button under the handle of
    the brew unit  and, whilst doing so,
    turn the handle clockwise .
     Press the catch in front of the brew
    unit  downwards, and pull the brew
    unit out carefully.
     Carefully pull the brew unit out of the
    coffee machine.

    64

     Wipe any remaining coffee off the
    two filters. One filter is located in the
    funnel and the other to the left of the
    funnel.
     Dry the funnel to prevent ground
    coffee sticking to it the next time a
    coffee is prepared.
     Clean the inside of the coffee
    machine. Use your vacuum cleaner to
    remove dry coffee grounds.



  • Page 65

    Cleaning and care
    To replace the brew unit:

    Maintenance programmes

     Proceed in the reverse order: push
    the brew unit back into the coffee
    machine, making sure it goes in
    straight.

    The coffee machine has the following
    maintenance programmes:
    – Rinse the machine
    – Rinse the milk pipework
    – Clean the milk pipework
    – Degrease the brew unit
    – Descale the machine
    Carry out the relevant maintenance
    programme when the prompt to do so
    appears in the display. Please see the
    following pages for more information.

     Press the button under the handle of
    the brew unit  and, whilst doing so,
    turn the handle anti-clockwise .
     Close the front.

    Opening the "Maintenance" menu
     Touch .
     Select  with the arrow
    sensors Maintenance. Touch OK.
    You can now select a maintenance
    programme.

    65



  • Page 66

    Cleaning and care
    Rinsing the machine

    Rinsing the milk pipework

    You can rinse the milk pipework
    manually.

    Milk residue can clog up the milk
    pipework. If you have made a drink with
    milk, the coffee machine will rinse the
    milk pipework automatically after a few
    minutes.

    After a coffee has been dispensed, the
    machine is rinsed before it switches
    off. This removes any residual coffee.
     Touch .

    You can also rinse the milk pipework
    manually.

     Touch the  arrow sensor until
    Maintenance is highlighted. Touch OK.

    Tip: Place a suitable container
    underneath the central spout.

     Touch the arrow sensors until Rinse
    appliance is highlighted. Touch OK.

     Touch .

    The pipework will now be rinsed
    through.

     Touch the  arrow sensor until
    Maintenance is highlighed. Touch OK.
     Select Rinse milk pipework and then
    touch OK.
    The pipework will now be rinsed
    through. The water used for rinsing
    process will run out of the central
    spout.

    66



  • Page 67

    Cleaning and care
    Cleaning the milk pipework
    The milk pipework must be cleaned at
    least once a week.
    The coffee machine will prompt you at
    the correct time. Clean the milk pipework
    in days will appear in the display three
    days before the coffee machine is due
    to be cleaned. Each time the coffee
    machine is switched on the number of
    days until the milk pipework needs to
    be cleaned will appear in the display.
     Touch OK to confirm the message.
    When the number of days remaining
    reaches 0, Clean milk pipework will
    appear in the display. You cannot make
    drinks with milk until cleaning has been
    carried out.
    You can now only dispense espresso,
    coffee, long coffee and hot water. You
    will only be able to make drinks with
    milk once the milk pipework has been
    cleaned.
     Touch OK to confirm the message.

    Carrying out the milk pipework
    cleaning process
    The cleaning process cannot be
    cancelled once it has started. The
    process has to be completed
    through to the end.
    The Clean milk pipework maintenance
    programme lasts for
    approx. 13 minutes.
     Touch .
     Touch the  arrow until Maintenance
    is highlighted. Touch OK.
     Touch the arrow sensors until Clean
    milk pipework is highlighted. Touch OK.
    The process will start and various
    messages will appear in the display.
     Follow the instructions in the display.
    When Fill the water container with cleaning

    agent and lukewarm water up to the 

    symbol and place in the appliance appears
    in the display, proceed as follows.

    67



  • Page 68

    Cleaning and care
    Make up the cleaning solution
    We recommend using Miele milk
    pipework cleaning agent for cleaning
    the milk pipework.
    This has been specially developed for
    use with Miele coffee machines and
    prevents subsequent damage.
    The milk pipework cleaning agent is
    available to order from Miele or via the
    internet at www.miele-shop.com.
     Add one sachet of the milk pipework
    cleaning agent to the water container.

     Fill the water container to the 
    mark with lukewarm water and stir
    the solution.
    Follow the instructions for the mixing
    ratio carefully. It is important that you
    do not fill the water container with
    too little water, otherwise cleaning
    will be incomplete.
     Replace the water container in the
    coffee machine and close the front.
     Follow the instructions in the display.
    When prompted to by the display,
     remove the water container and rinse
    it carefully with clean water. Make
    sure that no cleaning agent is left in
    68

    the water container. Fill the water
    container with fresh tap water and
    replace it in the machine.
    The cleaning process is finished when
    appears in the display.

    Prog. finished



  • Page 69

    Cleaning and care
    Degreasing the brew unit

     Touch OK.

    Depending on the natural oil content of
    the coffee used, the brew unit can
    become blocked quite quickly. It must
    be degreased regularly in order to
    ensure aromatic coffee and trouble-free
    operation of the coffee machine.

     Follow the instructions in the display.
    When Place a cleaning tablet in the ground
    appears
    in the display:

    coffee chute and close the chute

    We recommend using Miele cleaning
    tablets to clean the brew unit. These
    have been specially developed for use
    with Miele coffee machines and prevent
    subsequent damage.
    Miele cleaning tablets can be ordered
    from Miele or www.miele-shop.com.
    The maintenance programme for
    degreasing the brew unit lasts for
    approx. 11 minutes.
    After 200 portions have been
    dispensed, Degrease the brew unit will
    appear in the display.
     Touch OK.
    This message will not go out until the
    brew unit has been degreased.
    Carrying out the degreasing the brew
    unit process
     Switch the coffee machine on with
    the On/Off sensor .
     Touch .
     Select Maintenance with the  arrow
    sensor and touch OK.

     Remove the coffee chute cover and
    open the lid of the coffee chute.
     Place a cleaning tablet into the coffee
    chute.
     Close the lid, replace the coffee
    chute cover and close the machine
    front.
     Follow the further instructions given
    in the display.
    When Prog. finished appears in the
    display
     touch OK.
    The brew unit has now been cleaned.

     Select Degrease the brew unit and then
    touch OK.
    The cleaning process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.
    69



  • Page 70

    Descaling the machine
    Warning. When descaling the
    machine, cover delicate surfaces
    and natural flooring to prevent
    damage from splashes of descaling
    solution.
    Ensure that any splashes of
    descaling solution are wiped up
    immediately.

    The coffee machine prompts you when
    it needs to be descaled. No. of uses until
    appliance needs descaling: 50 will appear
    in the display. The remaining number of
    drinks that can be made before
    descaling will now show in the display
    after each drink is made.

    Limescale builds up in the coffee
    machine through use. How often the
    machine needs to be descaled will
    depend on the water hardness level in
    your area. It should be descaled
    regularly to ensure that it functions
    correctly.

    When the number of remaining portions
    reaches 0, the coffee machine will lock
    out.

    The machine will guide you through the
    descaling process. Various messages
    will appear in the display, e.g. you will
    be prompted to empty the drip tray or
    fill the water container.
    Descaling must be carried out. The
    process takes approx. 20 minutes.

    70

     Touch OK to confirm the message.

    You can switch off the coffee machine if
    you do not want to descale it at this
    time. However, you will be not be able
    to make any more drinks until descaling
    has been carried out.



  • Page 71

    Descaling the machine
    Descaling after prompt
    appears in the display
    Descale the appliance

    display.

    appears in the

    The descaling process cannot be
    cancelled once it has started. The
    process has to be completed through
    to the end.
     Touch OK.
    The process will start.
     Follow the instructions in the display.
    When Fill water container with descaling

    agent and lukewarm water up to the 

    symbol and place in the appliance appears
    in the display, proceed as follows.

    Make up the descaling solution
    We recommend using Miele descaling
    tablets for optimum results.
    These have been specially developed
    for use with Miele coffee machines and
    prevent subsequent damage.
    Other descaling agents, which
    contain other acids besides citric
    acid and/or other undesirable
    substances, such as chlorides for
    example, could damage the coffee
    machine. Moreover, the descaling
    effect required could not be
    guaranteed if the descaling solution
    was not of the appropriate
    concentration.
    Miele descaling tablets are available to
    order from Miele or via the internet at
    www.miele-shop.com.

    71



  • Page 72

    Descaling the machine
    You will need 2 descaling tablets.

    Carrying out descaling
     Replace the water container in the
    coffee machine and close the front.
     Follow the further instructions given
    in the display.
    When Rinse the water container and fill with

    fresh tap water up to the  symbol

    appears in the display:

     Fill the water container to the 
    symbol with lukewarm water.
     Drop 2 descaling tablets in the water.
    Follow the instructions for the mixing
    ratio carefully. It is important that you
    do not fill the water container with
    too much or too little water.
    Otherwise the descaling process will
    be cancelled prematurely.

     Carefully rinse the water container
    with clean water. Ensure that no
    descaling solution residue remains in
    the water container. Fill the water
    container to the  symbol with fresh,
    clean tap water.
    The cleaning process is finished when
    rinsing has finished.
     Touch OK.
    The coffee machine has now been
    descaled and can be used for making
    drinks again.
    The water container and the drip tray
    should be cleaned carefully after
    descaling in order to remove any traces
    of descaling agent.
    To protect the machine and
    surrounding surfaces from damage,
    make sure you wipe up any spillages
    or splashes of descaling agent
    immediately.

    72



  • Page 73

    Descaling the machine
    Descaling when not prompted
    by a message
     Touch .
     Select Maintenance and touch OK.
     Select Descale the appliance.
    The descaling process cannot be
    cancelled once it has started. The
    process has to be completed through
    to the end.
     Touch OK.
    The descaling process will now start.

    73



  • Page 74

    Problem solving guide
    Most problems that occur during daily use can be easily corrected. With the help
    of the following guide, you will be able to find the causes of problems and rectify
    them.

     Warning. Do not open the casing of the machine.
    Repairs and other work by unqualified persons can cause considerable danger
    to users.
    Repairs should only be carried out by a Miele authorised technician.
    If you cannot resolve the problem following these instructions please contact
    Miele (see back cover for contact details).

    Messages in the display
    Fault messages must be confirmed with "OK", otherwise the message can
    reappear in the display even though the problem has been remedied.
    Follow the instructions which appear in the display to remedy the problem.
    If after this, the fault message appears in the display again, contact Miele.
    Problem

    Cause and remedy

    F1, F2, F3, F4,
    F80, F81, F82, F83

    There is an internal fault.
     Switch the coffee machine off with the On/Off
    sensor . Wait for approx. 1 hour before
    switching it back on again.

    F74, 77
    F225, F226
    F235, F236

    There is an internal fault.
     Switch off the coffee machine with the On/Off
    sensor . Wait for approx. 2 minutes before
    switching the machine back on again.

    74



  • Page 75

    Problem solving guide
    Problem

    Cause and remedy

    F73 or

    The brew unit cannot be positioned correctly, or it is
    dirty and the ground coffee cannot be processed.
     Check whether you can remove the brew unit (see
    "Cleaning and care - Brew unit").
     Remove and clean the brew unit (see "Cleaning
    and care – Brew unit").

    Check the brew unit

     Push the coffee ejector of the brew unit into the
    correct position (see illustration).
     Push the waste container and the water container
    back in the machine. Do not insert the brew unit.
    Close the front and switch the machine on with
    the On/Off sensor .
    This will initialise the brew unit motor and put it back
    into the start position.
     When Insert the brew unit appears in the display,
    open the front and replace all the parts back in the
    machine. Close the front.
    If the brew unit cannot be removed:
     Switch the machine off with the On/Off sensor .
    Wait for approx. 2 minutes before switching it
    back on again.

    75



  • Page 76

    Problem solving guide
    Problem

    Cause and remedy

    Too much ground coffee

    There is too much ready ground coffee in the ground
    coffee chute.
    If more than one level spoon of ground coffee is
    added to the coffee chute, the brew unit cannot
    process the coffee. The ground coffee will be directed
    into the waste container and the fault message will
    appear in the display.
     Switch the coffee machine off with the On/Off
    sensor .
     Remove and clean the brew unit (see "Cleaning
    and care – Brew unit").
     Remove the ground coffee inside the coffee
    machine, e.g. with a vacuum cleaner.
     Use the coffee spoon supplied to add ground
    coffee to the ground coffee chute. Add only one
    portion of ground coffee to the chute.

    Check water intake

    There is a problem with the mains water inlet.
     Check whether the inlet hose is kinked or the
    stopcock is not turned on completely.
     Remove and empty the water container.
     Push the water container back in the machine,
    making sure it is positioned correctly.

    Push the water container in

    The water container is not in the correct position.
     Remove the water container and replace it.

    until it engages

    This fault message also appears if the water container
    was not correctly filled and replaced for descaling.
     Fill the water container to the descaling symbol 
    and restart the descaling process.

    76



  • Page 77

    Problem solving guide
    Unusual performance of the coffee machine
    Problem

    Cause and remedy

    The display remains
    dark after the coffee
    machine has been
    switched on using the
    On/Off sensor .

    The On/Off sensor  was not touched for long
    enough.
     Touch the depression in the middle of the On/Off
    sensor  for at least 3 seconds.
    The plug is not inserted in the socket correctly.
     Insert the plug into the socket correctly and switch
    on.
    The mains fuse has tripped due to a problem with the
    coffee machine, the electricity supply or another
    appliance.
     Switch the coffee machine off at the wall socket
    and unplug it.
     Contact a qualified electrician or Miele.

    The lighting remains off The lighting has been switched off.
    after the coffee
     Switch the lighting on (see "Settings - Lighting").
    machine has been
    The lighting is faulty.
    switched on.
     Contact Miele.
    The coffee machine
    switches off suddenly.

    The switch-off time programmed using the timer has
    been reached.
     If required, you can select a new switch-off time
    (see "Settings - Timer").
    The plug is not inserted in the socket correctly.
     Insert the plug into the socket correctly and switch
    on.

    The coffee machine is
    switched on. The
    lighting switches off
    suddenly.

    The machine will switch itself off automatically after
    approximately 10 minutes if it is not being used.

    The sensors do not
    react to touch.
    The coffee machine
    cannot be operated.

    There is an internal fault.
     Open the front of the coffee machine.
    The current process currently will be stopped.
     Disconnect the coffee machine from the power
    supply.
    77



  • Page 78

    Problem solving guide
    Problem

    Cause and remedy

    The coffee machine
    does not switch itself
    on, although the Switch
    on at setting has been
    activated for the timer.

    The system lock has been activated.
     You need to deactivate the system lock (see
    "Settings - System lock").
    A day of the week has not been selected.
     Check the timer settings and change these if
    necessary (see "Settings - Timer").
    The coffee machine was not used after being
    switched on automatically three times in succession
    (holiday mode).
     Switch the machine on and dispense a drink.

    The display is hard to
    see or not able to be
    read.

    The display brightness has been set too low.
     Change this setting (see "Settings").

    After being switched on The coffee machine needs descaling.
     Switch the machine off with the On/Off sensor .
    until it engages appears in
    Wait for approx. 1 hour.
    the display although the  Then switch the machine on again. As soon as
    water container has
    Heating-up phase appears in the display, touch 
    been filled and inserted.
    and select Descale the appliance.
    The machine does not
     Descale the coffee machine. You may need to
    rinse.
    repeat the descaling process.

    Push the water container in

    78



  • Page 79

    Problem solving guide
    Problem
    Empty the drip tray

    appears in the display,
    even though the drip
    tray has been emptied.

    Cause and remedy
    The drip tray is not positioned correctly in the
    machine.
     Push the drip tray in as far as it will go.
    The sensors on the drip tray are not working properly.
    The contacts are dirty.

     Clean the contacts and dry them thoroughly (see
    "Cleaning and care - Drip tray").
    The machine front will
    not close.

    The containers are not pushed all the way in.
     Check the containers.
    The hinges are not correctly aligned.
     Adjust the hinges (see "Installation - Adjusting the
    hinges").

    79



  • Page 80

    Problem solving guide
    Problem

    Cause and remedy

    The machine front is
    difficult to open and
    close.

    The cap on the central spout connector has either not
    been lubricated or is not lubricated sufficiently.

     Check the silicone cap for damage. If necessary,
    replace it with the extra cap supplied.
     Lubricate the cap with the silicone grease
    supplied.
    Lubricate the cap on the central spout connector
    regularly once a month.
    The coffee machine
    does not rinse itself
    when turned on.

    This is not a fault.
    If the coffee machine still has an operating
    temperature higher than 60 °C, rinsing will not take
    place.

    When rinsing, no water
    or noticeably less water
    than usual runs out of
    the central spout.
    No coffee or noticeably
    less coffee than usual is
    dispensed from the
    central spout. The
    display and the noise
    when coffee is being
    made remain the same.
    There is noticeably
    more "coffee water" in
    the waste container.

    The central spout is not fitted correctly.
     Check whether the central spout has been
    assembled as described (see "Cleaning and care –
    Central spout").

    80

    The cap is no longer securely fitted to the central
    spout connector (see "Guide to the machine").
     Check the cap on the central spout connector.
    Lubricate the cap with the silicone grease
    supplied.
    The cap on the central spout connector is damaged
    or missing.
     Replace the cap with the extra cap supplied.
     Lubricate the cap with the silicone grease
    supplied.



  • Page 81

    Problem solving guide
    Problem

    Cause and remedy

    Drink preparation has
    been cancelled.

    There is a problem with the mains water inlet.
     Check whether the inlet hose is kinked or the
    stopcock is not turned on completely.
    The water container became empty while a drink was
    being made, however, Mains water - On is selected
    and the coffee machine has not been plumbed into
    the mains water supply.
     Check the mains water connection settings (see
    "Settings - Mains water").
    If the water container or the milk flask becomes
    empty while a drink is being made, after the water
    container or the milk flask is filled and replaced the
    message Continue? will appear in the display. If you
    do not confirm with Yes within 5 minutes, the drink
    will be cancelled.

    The descaling process The descaling process cannot be stopped once the
    was started by mistake. "OK" sensor has been touched.
    Descaling must be continued through to completion.
    This is a safety precaution to make sure the machine
    is descaled correctly. This is important for the
    longevity and functional efficiency of your coffee
    machine.
     Descale the coffee machine (see "Descaling").
    Loud noises are heard
    during the descaling
    programme.

    This is not a fault.
    These noises occur when water is flushed through
    the machine at a high pressure.

    or Heating
    Mains water: On is probably selected and the coffee
    machine has not been plumbed into the mains water
    shows in the
    supply.
    display all the time.
    Drinks cannot be made.  Fill the water container.
     Then check the mains water setting (see "Settings
    - Mains water").

    Please wait...
    phase

    The display lights up
    but the coffee machine
    does not heat up and
    no drinks are made.

    The Demo mode for demonstrating the coffee
    machine in the showroom has been activated.
     Deactivate the demo mode (see "Settings – Demo
    mode")
    81



  • Page 82

    Problem solving guide
    Unsatisfactory results
    Problem

    Cause and remedy

    The coffee is not hot
    enough.

    The cup has not been pre-heated.
    The smaller the cup and the thicker its sides, the
    more important it is to pre-heat it.
     Pre-heat the cup, for example, with hot water.
    The brewing temperature has been set too low.
     Set a higher brewing temperature (see "Coffee the
    way you like it – Brewing temperature").
    The filters in the brew unit are blocked.
     Remove and clean the brew unit by hand (see
    "Cleaning and care – Brew unit").
     Degrease the brew unit (see "Cleaning and care –
    Brew unit").

    The heating-up time is The coffee machine needs descaling.
    getting longer, the
     Descale the coffee machine (see "Descaling").
    amount of water being
    dispensed is incorrect
    and the coffee machine
    is not performing
    properly.
    Coffee is not being
    Coffee deposits in the central spout are obstructing
    dispensed from both
    dispensing.
    spouts evenly. Milk may  Dismantle the central spout and clean the
    be sputtering when
    components – with the exception of the stainless
    being heated up.
    steel cover – in the dishwasher (see "Cleaning and
    care – Central spout").
    The central spout should be cleaned once a
    week.
    The coffee grinder
    makes a louder noise
    than usual.

    The coffee bean container has become empty during
    the grinding process.
     Fill the container with fresh beans.
    There may be stones in amongst the coffee beans.
     Switch the coffee machine off immediately. Call
    Miele.

    82



  • Page 83

    Problem solving guide
    Problem

    Cause and remedy

    The coffee flows too
    quickly into the cup.

    The coffee is too coarsely ground.
     Set the grinder to a finer setting (see "Setting the
    coffee grinder").

    The coffee trickles too
    slowly into the cup.

    The coffee is too finely ground.
     Set the grinder to a coarser setting (see "Setting
    the coffee grinder").

    The crema on the
    coffee or espresso is
    not as it should be.

    The grinder setting is not correct.
     Set the grinder to a finer or coarser setting (see
    "Setting the coffee grinder").
    The brewing temperature is too high for this type of
    coffee.
     Set a lower brewing temperature (see "Brewing
    temperature").
    The coffee beans are stale.
     Add fresh coffee beans to the coffee bean
    container.

    83



  • Page 84

    Problem solving guide
    Problems when heating up or frothing milk
    Problem

    Cause and remedy

    The milk sputters when
    it is dispensed. Hissing
    noises can be heard
    when milk is being
    heated up or frothed.
    Although the milk
    should be frothed, only
    hot milk is dispensed
    from the central spout.

    The milk temperature is too high. Good milk froth can
    only be achieved when cold milk (< 10 °C) is used.
     Check the temperature in the milk flask.
    The milk flask has not been fitted correctly and so air
    as well as milk is being sucked in.
     Push the milk flask in until it clicks into position.
    The central spout is not fitted correctly.
     Check whether the central spout has been
    assembled correctly.
    The milk pipework in the milk flask lid is dirty.
     Dismantle the milk flask lid and clean it with the
    cleaning brush (see "Cleaning and care – Milk
    flask").
     Clean the central spout and the milk valve with the
    cleaning brush (see "Central spout" and
    "Maintenance of the milk valve").
    The angled connector is blocked and must be
    replaced.
     Replace the angled connector (see "Replacing the
    angled connector").

    Fill and insert milk flask
    The milk flask lid could be dirty and this has
    appears in the display
    prevented the sensing function from working
    properly.
    even though the milk
    flask has been filled and  Clean the milk flask lid and the milk flask
    inserted in the machine.
    thoroughly. Dismantle the lid and clean it with the
    cleaning brush supplied (see "Cleaning and care –
    Milk flask and lid").

    84



  • Page 85

    Problem solving guide
    Replacing the angled
    connector
    If instead of being frothed the milk is
    only being heated up, check the
    following first:
    – Is the milk in the milk flask cold
    (< 10 ° C)?
    – Have the central spout and the milk
    flask lid been cleaned carefully?
    – Is the central spout correctly fitted?
    If after checking the above, milk still
    cannot be frothed, replace the angled
    connector as follows:
    You will need the replacement angled
    connector supplied with the coffee
    machine.
    Do not use a needle or similar
    implement. This would damage the
    components.

     First release air intake tube  from
    opening . Then pull off angled
    connector .
     Pull both tubes out of the angled
    connector.
     Clean air intake tube  under
    running water with the cleaning brush
    supplied. "Blowing through" can help
    to dislodge blockages.
     Insert the brush in milk tube . Move
    the brush back and forth as far as
    possible until all milk deposits have
    been removed.
     Take the new angled connector. (You
    can dispose of the old angled
    connector with normal household
    waste).

     Open the maintenance panel on the
    back of the machine front.

    85



  • Page 86

    Problem solving guide

     Push the tubes onto the angled
    connector and fit it in the coffee
    machine. Make sure that the crosspiece on the angled connector is
    facing downwards.
     Re-insert the air intake tube into
    opening .
     Replace the maintenance panel and
    close the front.

    86



  • Page 87

    After Sales / Guarantee
    After sales service

    Guarantee

    In the event of a fault which you cannot
    correct yourself, or if the machine is
    under guarantee please contact:

    For information on the appliance
    guarantee specific to your country
    please contact Miele. See back cover
    for address.

    – your Miele Dealer
    or
    – Miele.
    Contact details for Miele are given at
    the end of this booklet. N.B. A call-out
    fee will be charged for service visits
    where the problem could have been
    resolved as described in these
    instructions.

    In the UK, your coffee machine is
    guaranteed for 2 years from the date of
    purchase. However, you must activate
    your cover by calling 0330 160 6640 or
    registering online at www.miele.co.uk.

    When contacting your Dealer or Miele,
    please quote the model and serial
    number of your coffee machine.
    These are shown on the data plate
    inside the machine.

    87



  • Page 88

    Saving energy
    If the settings of the following functions
    are altered from the factory default,
    energy consumption will increase:
    – Eco mode
    – Lighting
    – Time of day display
    – Timer

    88



  • Page 89

    Plumbed in water connection
    Notes on connecting to the
    mains water supply
    Connection to the mains water
    supply should only be carried out by
    a qualified and competent person.
    Disconnect the coffee machine from
    the mains electricity supply before
    connecting it to the mains water
    supply.
    Close the stopcock before
    connecting the water intake hose to
    the coffee machine.
    The water quality must conform to
    the requirements for drinking water
    in the country the machine is being
    installed in.
    The coffee machine meets the
    requirements of IEC 61770 and EN
    61770.
    Connection to the household water
    supply must comply with current
    national and local safety regulations
    in the country in which the coffee
    machine is being installed. All items
    used for connecting the machine to
    the mains water supply must comply
    with current national and local safety
    regulations in the country in which
    the machine is being installed.

    The machine is only suitable for
    connection to a cold water supply
    which
    – is connected directly to the fresh
    water supply to guarantee circulation
    of water throughout the system.
    Avoid laying the water hose in such a
    way that water can collect in it, as
    this can affect the taste of the drinks.
    – The coffee machine is constructed to
    comply with the relevant DIN
    standard and may be connected to
    the mains drinking water supply
    without a non-return valve if national
    regulations permit.
    – The water intake hose must be able
    to sustain operating pressure.
    – The water pressure (flow rate) must
    be between 1 and 10 bar (105 and
    106 Pa).
    – The stainless steel hose supplied is
    1.5 m long and must not be
    lengthened.
    – The water intake system must
    comply with hygiene regulations.
    – A stopcock must be provided
    between the stainless steel hose and
    the household water supply to ensure
    that the water supply can be cut off if
    necessary.
    The stocpcock should be easily
    accessible after the machine has
    been built in.

    89



  • Page 90

    Plumbed in water connection
    A faulty stainless steel hose must
    only be replaced by a genuine Miele
    replacement hose (available from
    Miele or at www.miele-shop.com).
    Make sure that the water hose is
    suitable for food use.

    Fitting the stainless steel hose
    to the coffee machine
    Make sure that the stainless steel
    hose is not kinked or damaged. The
    stainless steel hose must not be
    shortened.

    Connection to the water inlet
    Before making plumbing
    connections, ensure that the
    machine is disconnected from the
    mains electricity supply.
    Connection to the water supply should
    be carried out by a qualified plumber
    and should incorporate a stopcock with
    a 3/4" threaded union.
     Check whether there is a washer. Fit
    one, if not.

     Remove the cover from the mains
    water connection at the back of the
    coffee machine.
     Take the angled end of the stainless
    steel hose and check whether there
    is a washer. Fit one, if not.
     Screw the coupling nut on the
    stainless steel hose onto the
    stopcock.
     Ensure that all connections are
    watertight.

     Connect the stainless steel hose to
    the stopcock.
    Use the stainless steel hose supplied
    with the machine. Old or used hoses
    must not be connected to the coffee
    machine.
     Ensure that it is screwed into position
    correctly.
     Turn on the stopcock slowly and
    check for leaks.
    Correct the position of the seal and
    union, if necessary.
    Proceed with building in the coffee
    machine (see "Installation").

    90



  • Page 91

    Electrical connection
    All electrical work should be carried out
    by a suitably qualified and competent
    person only, in strict accordance with
    current national and local safety
    regulations (BS 7671 in the UK).
    Installation, repairs and other work by
    unqualified persons could be
    dangerous. The manufacturer cannot
    be held liable for unauthorised work.

    The coffee machine must not be used
    with so-called energy saving devices
    either. These reduce the amount of
    energy supplied to the machine causing
    it to overheat.

    The voltage and frequency are given on
    the data plate located inside the
    machine. Please ensure these match
    the household mains supply. This data
    must correspond in order to avoid
    damage to the machine. The fuse rating
    is quoted on the plug.
    The coffee machine is supplied with a
    mains cable with moulded plug for
    connection to a 50 Hz, 220-240 V
    mains supply.
    The fuse rating must be at least 13 A.
    Connection should be made via a fused
    plug and suitable switched socket
    which is easily accessible after
    installation. If the mains socket is not
    accessible after the appliance has been
    built in, a separator for each terminal
    must be present. There must be an allpole contact gap of at least 3 mm in the
    switch (including switch, fuses and
    relays according to EN 60335).
    Do not connect the machine to an
    inverter such as those used with an
    autonomous energy source e.g. solar
    power. When switched on, peak loads
    in the system can cause the safety
    switch off mechanism to be triggered.
    This can damage the electronic unit.

    91



  • Page 92

    Installation
    Building-in and combination options
    The machine is designed to be built into a tall unit.

    It can also be combined with other Miele built-in appliances. If the coffee machine
    is to be built in above another appliance, there must be a full-width, closed shelf
    between them (except when it is combined with a suitable Miele built-in plate or
    food warming drawer).

    92



  • Page 93

    Installation
    Ventilation
    Condensate can damage the coffee
    machine or the housing unit.
    The ventilation gaps given must be
    observed.
    Do not cover or block the ventilation
    gaps.
    Dust the ventilation gaps regularly.
    Steam which is created when water is
    heated up can condense on the interior
    and the inside of the front of the coffee
    machine.

    – A ventilation gap of at least 40 mm
    depth must be allowed for behind the
    machine for air to circulate.
    – The ventilation cross-sections in the
    plinth, housing unit and below the
    room ceiling must amount to at least
    200 cm2 to ensure that air can
    circulate without hindrance.
    Top ventilation gap
    The ventilation gap at the top of the
    machine can be constructed in different
    ways:

    When installing the coffee machine
    ensure that there is sufficient ventilation
    at the rear of the machine to allow
    steam and heated air to escape without
    hindrance.
    The housing unit should be configured
    as follows:

    a directly above the coffee machine
    with a ventilation grille (free air flow
    of at least 200 cm2)
    b in between the housing unit and the
    ceiling
    c through a suspended ceiling.

    – Air intake  occurs via the plinth at
    the bottom of the machine and the
    air escapes at the top  at the rear
    of the housing unit.
    93



  • Page 94

    Installation
    Building in the coffee machine
    Before installation make sure that
    there is no power supply to the
    machine. This also applies should it
    ever need to be taken out of its
    housing unit.
    The machine may only be operated
    when built-in and in an ambient
    temperature range between +10 °C
    to +38 °C.
    You will need two Allen keys (size 3
    and 5) for installing the machine.
    To align the machine front with the
    furniture front ensure that there is a
    sealing strip provided all the way
    around the building-in niche or around
    the coffee machine.

    Tip: It is useful to have somewhere at
    the height of the niche to place the
    machine on. This makes electrical
    connection and connection to the
    plumbed in water supply easier.

     Using the large allen key, unscrew all
    four feet out by about 2 mm.
    The feet can be unscrewed by up to
    approx. 10 mm.
     Plumb the machine into the mains
    water supply (see "Plumbed in water
    connection").
     Connect the machine to the electrical
    supply.

     If the housing unit niche is not fitted
    with a sealing strip you should fit a
    Miele sealing strip to the machine
    before installing it. This is fitted from
    the back of the machine.
    The sealing strip is available to order
    from Miele.

    94

    Take care not to damage the
    electrical connection or the plumbing
    connection when pushing the coffee
    machine into the niche.
     Push the coffee machine all the way
    into the niche until you feel a
    resistance.
     Check the height of the coffee
    machine to make sure that it is sitting
    centrally in the niche and that it is
    level. If this is not the case, realign
    the machine using the four feet.



  • Page 95

    Installation
    Four M5 socket screws are supplied for
    aligning and securing the machine in its
    niche.

     Open the front of the machine and
    loosely fit the screws at either side.
     Carefully turn the lower socket
    screws to centre the machine in the
    niche.
     Tighten both upper socket screws by
    hand to secure the machine in the
    unit. Do not overtighten them.

    Adjusting the hinges
    If the machine front becomes difficult to
    open or close after installation, you can
    adjust the hinges to realign it (TX 20):

     Tighten screw  to align the front of
    the machine so that it is flush with
    the front of the housing unit.
     Tighten screw  to align the front of
    the machine horizontally and
    vertically.

    95



  • Page 96



  • Page 97



  • Page 98



  • Page 99

    United Kingdom
    Miele Co. Ltd.
    Fairacres, Marcham Road
    Abingdon, Oxon, OX14 1TW
    Customer Contact Centre Tel: 0330 160 6600
    E-mail: mielecare@miele.co.uk
    Internet: www.miele.co.uk
    Australia
    Miele Australia Pty. Ltd.
    ACN 005 635 398
    ABN 96 005 635 398
    1 Gilbert Park Drive, Knoxfield, VIC 3180
    Tel: 1300 464 353
    Internet: www.miele.com.au
    China
    Miele (Shanghai) Trading Ltd.
    1-3 Floor, No. 82 Shi Men Yi Road
    Jing' an District
    200040 Shanghai, PRC
    Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
    E-mail: info@miele.cn, Internet: www.miele.cn
    Miele (Hong Kong) Limited
    41/F - 4101, Manhattan Place
    23 Wang Tai Road
    Kowloon Bay, Hong Kong
    Tel: (852) 2610 1331, Fax: (852)2610 1013
    Email: mielehk@miele.com.hk
    India
    Miele India Pvt. Ltd.
    Ground Floor, Copia Corporate Suites
    Plot No. 9, Jasola
    New Delhi - 110025
    Tel: 011-46 900 000, Fax: 011-46 900 001
    E-mail: customercare@miele.in, Internet: www.miele.in
    Ireland
    Miele Ireland Ltd.
    2024 Bianconi Avenue
    Citywest Business Campus, Dublin 24
    Tel: (01) 461 07 10, Fax: (01) 461 07 97
    E-Mail: info@miele.ie, Internet: www.miele.ie
    Manufacturer: Miele & Cie. KG
    Carl-Miele-Straße 29, 33332 Gütersloh, Germany

    96

    Malaysia
    Miele Sdn Bhd
    Suite 12-2, Level 12
    Menara Sapura Kencana Petroleum
    Solaris Dutamas No. 1, Jalan Dutamas 1
    50480 Kuala Lumpur, Malaysia
    Phone: +603-6209-0288
    Fax: +603-6205-3768
    New Zealand
    Miele New Zealand Limited
    IRD 98 463 631
    Level 2, 10 College Hill
    Freemans Bay, Auckland 1011, NZ
    Tel: 0800 464 353
    Internet: www.miele.co.nz
    Singapore
    Miele Pte. Ltd.
    163 Penang Road
    # 04 - 03 Winsland House II
    Singapore 238463
    Tel: +65 6735 1191, Fax: +65 6735 1161
    E-Mail: info@miele.com.sg
    Internet: www.miele.sg
    South Africa
    Miele (Pty) Ltd
    63 Peter Place, Bryanston 2194
    P.O. Box 69434, Bryanston 2021
    Tel: (011) 875 9000, Fax: (011) 875 9035
    E-mail: info@miele.co.za
    Internet: www.miele.co.za
    United Arab Emirates
    Miele Appliances Ltd.
    P.O. Box 11 47 82
    Gold & Diamond Park, Sheikh Zayed Road
    Building 6 / Offices Nos. 6-214 to 6-220
    Dubai
    Tel: +971-4-341 84 44
    Fax: +971-4-341 88 52
    E-Mail: info@miele.ae
    Internet: www.miele.ae



  • Page 100

    CVA 6405



    en – GB

    M.-Nr. 10 214 100 / 01






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele CVA 6405 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Miele CVA 6405 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,18 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Miele CVA 6405

Miele CVA 6405 Bedienungsanleitung - Deutsch - 92 seiten

Miele CVA 6405 Kurzanleitung - Deutsch - 2 seiten

Miele CVA 6405 Bedienungsanleitung - Deutsch - 88 seiten

Miele CVA 6405 Kurzanleitung - Holländisch - 2 seiten

Miele CVA 6405 Bedienungsanleitung - Holländisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info