Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Operating and installation instructions
Built-in coffee machine
CVA 6431 (C)
To avoid the risk of accidents
or damage to the machine,
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 09 549 580
en-GB
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Miele Nespressokaffeeautomat 6431
    lässt sich nicht anschalten Eingereicht am 21-9-2019 12:29

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    Operating and installation instructions

    Built-in coffee machine
    CVA 6431 (C)

    To avoid the risk of accidents
    or damage to the machine,
    it is essential to read these
    instructions before it is installed
    and used for the first time.

    en - GB
    M.-Nr. 09 549 580



  • Page 2

    Caring for the environment
    Disposal of the packing
    material
    The packaging is designed to protect
    the appliance from damage during
    transportation. The packaging materials
    used are selected from materials which
    are environmentally friendly for disposal
    and should be recycled.
    Recycling the packaging reduces the
    use of raw materials in the
    manufacturing process and also
    reduces the amount of waste in landfill
    sites.

    Disposal of your old machine
    Electrical and electronic machines
    often contain valuable materials. They
    also contain materials which, if handled
    or disposed of incorrectly, could be
    potentially hazardous to human health
    and to the environment. They are,
    however, essential for the correct
    functioning of your machine. Please do
    not therefore dispose of it with your
    household waste.

    Please dispose of it at your local
    community waste collection/recycling
    centre, or contact your Dealer for
    advice. Ensure that it presents no
    danger to children while being stored
    for disposal.

    2



  • Page 3

    Contents
    Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
    Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    Preparing the coffee machine for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Switching on for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
    Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
    Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Switching off for longer periods of time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Filling the machine with coffee capsules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
    Filling the capsule carousel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
    Taking capsules out of the capsule carousel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
    Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Making espresso or coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Preparing two portions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    After preparing drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Preparing hot milk, milk froth and cappuccino . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
    Notes on using the cappuccinatore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
    Dispensing froth directly into the cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
    Preparing cappuccino . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Frothing milk in the cappuccinatore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Preparing hot milk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    After preparing milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Making drinks using a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Allocating the types of coffee (Type allocation) . . . . . . . . . . . . . . . . . . . . . . . . 30
    Calling up "Type allocation" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
    Select type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
    Allocate type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
    Change type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    Delete type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

    3



  • Page 4

    Contents
    Changing the portion sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Changing the portion size while making a drink . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Setting the portion size from the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Changing portion sizes for different profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Setting up profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Calling up a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Create profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Select profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    Change name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    Delete profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    Change profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Calling up the Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Changing and saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Possible setting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Display (Time of day display) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Clock format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Selecting a timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    Allocating days of the week . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    Activating and deactivating the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Setting the brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Setting the time the lighting switches off (Switch off after) . . . . . . . . . . . . . . . . 42
    Info (Display information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Locking the coffee machine (System lock 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Activating and deactivating the system lock 0 . . . . . . . . . . . . . . . . . . . . . . . . 43
    To override the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Showroom programme (Demo mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    4



  • Page 5

    Contents
    Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
    Rinsing the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Drip tray with grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Grille with drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
    Capsule carousel and carousel runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Central spout cover and drip catcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Capsule plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
    Steam valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
    Cappuccinatore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
    Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
    Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Descaling after being prompted by the display . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Descaling without being prompted by the display . . . . . . . . . . . . . . . . . . . . . . . . 57
    Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
    After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
    Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
    Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
    Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
    Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
    Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    Adjusting the hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

    5



  • Page 6

    Guide to the machine
    Exterior view

    a Controls and display
    b Handle
    c Plastic grille
    d Metal drip tray cover
    e Central spout
    f Inset for Cappuccinatore
    g Steam valve

    6



  • Page 7

    Guide to the machine
    Interior view

    a Capsule plate
    (replace with the red descaling funnel when descaling is carried out)
    b Brew unit
    c Capsule carousel
    d Carousel runners
    e Water container
    f Drip tray with grid
    g Waste container
    h Central spout cover
    i Drip catcher

    7



  • Page 8

    Guide to the machine
    Controls and display

    a On/Off sensor K

    For switching the coffee machine on and off

    b "Profiles" {

    For saving and editing profiles

    c "Two portions" °

    For preparing two portions of a drink

    d Drinks sensors

    For dispensing
    . Espresso
    / Coffee
    y Long coffee

    e Display

    Shows information about the current action or status

    f "Settings " X

    For altering settings, displaying information or
    checking which settings are currently active

    g "Back" #

    For returning to the previous menu, cancelling
    unwanted actions

    h Arrow sensors Y X

    For displaying further options and highlighting a
    selection

    i OK sensor

    For confirming display messages and saving
    settings

    j "Maintenance" y

    For calling up the maintenance programme

    8



  • Page 9

    Accessories
    Accessories supplied

    Optional accessories

    – Cappuccinatore
    glass jug for making hot milk and
    milk froth

    Miele accessories and cleaning and
    conditioning products are available for
    your coffee machine.

    – Descaling funnel (red)
    for descaling the water pipework

    – Microfibre cloth
    for removing finger marks and light
    soiling

    – Descaling tablets
    for descaling the water pipework
    (Starter set)
    – Cleaning tablets
    for degreasing the capsule plate
    (Starter set)
    – Test strips
    for determining the water hardness
    level
    – Maintenance tool
    for changing the capsule hopper and
    releasing the steam valve

    – Capsule hopper
    must be replaced after approx.
    15,000 coffee capsules have been
    dispensed
    – Cappuccinatore
    glass jug for making hot milk and
    milk froth
    – Descaling tablets
    for descaling the water pipework
    – Cleaning tablets
    for degreasing the capsule plate
    – GCEO dishwasher insert
    for cleaning the Cappuccinatore in a
    dishwasher

    These products and other useful
    accessories can be ordered via the
    internet, from Miele (see back cover for
    contact details) or from your Miele
    dealer.

    9



  • Page 10

    Warning and Safety instructions
    This coffee machine complies with all relevant legal safety
    requirements. Improper use can, however, lead to personal injury
    and damage to property.
    To avoid the risk of accidents and damage to the machine,
    please read these instructions carefully before using it for the first
    time. They contain important information on installation, safety,
    use and maintenance.
    Miele cannot be held liable for damage caused by
    non-compliance with these Warning and Safety instructions.
    Keep these instructions in a safe place and ensure that new users
    are familiar with the content. Pass them on to any future owner.

    Correct application

    ~ This coffee machine is intended for use in domestic households
    and similar working and residential environments. It is not intended
    for outdoor use.

    ~ It must be used as a domestic appliance and only for the
    preparation of espresso, cappuccino, latte macchiato etc.
    Any other usage is not supported by the manufacturer and could be
    dangerous.

    ~ The coffee machine can only be used by people with reduced
    physical, sensory or mental capabilities, or lack of experience and
    knowledge, if they are supervised whilst using it, or have been
    shown how to use it in a safe way and recognise and understand the
    consequences of incorrect operation.

    10



  • Page 11

    Warning and Safety instructions
    Safety with children

    , Caution. The central spout and the steam valve present a
    danger of burning and scalding. Children's skin is very sensitive
    and reacts to hot temperatures.
    Do not allow them to touch hot components of the coffee machine
    or to place any part of their body under the spouts.

    ~ Install the coffee machine where it is out of the reach of children.
    ~ Children under 8 years of age must be kept away from the
    machine unless they are constantly supervised.

    ~ Children 8 years and older may only use the machine
    unsupervised if they have been shown how to use it in a safe way
    and recognise and understand the consequences of incorrect
    operation.

    ~ Children must not be allowed to clean or maintain the machine
    unsupervised.

    ~ Please supervise children in the vicinity of the coffee machine
    and do not allow them to play with it.
    Remember that coffee and espresso are not suitable drinks for
    children.

    ~ Danger of suffocation. Packaging, e.g. plastic wrappings, must
    be kept out of the reach of babies and children. Whilst playing,
    children could become entangled in packaging or pull it over their
    head and suffocate.

    11



  • Page 12

    Warning and Safety instructions
    Technical safety

    ~ A damaged coffee machine could be dangerous. Before building
    in the machine, check it for any externally visible damage. Do not
    use a damaged machine.

    ~ Before connecting the machine to the mains supply, make sure
    the connection data (voltage and frequency) on the data plate
    corresponds to the household supply. Consult a qualified electrician
    if in any doubt.

    ~ The electrical safety of this machine can only be guaranteed if
    correctly earthed. It is essential that this standard safety requirement
    is met. If in any doubt, please have the electrical installation tested
    by a qualified electrician.

    ~ Do not connect the machine to the mains electrical supply by a
    multi-socket adapter or an extension lead. These are a fire hazard
    and do not guarantee the required safety of the machine.

    ~ For safety reasons, this machine may only be used when it has
    been built in.

    ~ If the coffee machine is to be built in above another appliance,
    there must be a full-width, closed shelf between them.

    ~ The coffee machine must not be used in a non-stationary location
    (e.g. on a ship).

    ~ Only use the coffee machine in rooms where the ambient
    temperature is between +10 °C and +38 °C.

    12



  • Page 13

    Warning and Safety instructions

    ~ Ensure that there is sufficient ventilation around the coffee
    machine. Otherwise condensation can build up and damage the
    machine and / or the housing unit.

    ~ If the coffee machine is installed behind a kitchen furniture door,
    it may only be used with the furniture door open. Do not close the
    furniture door while the coffee machine is in use.

    ~ Repairs may only be carried out by a Miele authorised service
    technician. Repairs and other work by unqualified persons can
    cause considerable danger to users. The manufacturer cannot be
    held liable for unauthorised work.

    ~ While the appliance is under guarantee, repairs should only be
    undertaken by a Miele authorised service technician. Otherwise the
    guarantee is invalidated.

    ~ Miele can only guarantee the safety of the machine when original
    Miele replacement parts are used. Faulty components must only be
    replaced by genuine Miele original spare parts.

    ~ The machine must be disconnected from the electrical supply
    during installation or repair work.

    ~ Do not open the outer casing of the machine. Tampering with
    electrical connections or components and mechanical parts is
    highly dangerous to the user and can cause operational faults.

    13



  • Page 14

    Warning and Safety instructions

    ~ Only use genuine original Miele accessories with this appliance.
    Using spare parts or accessories from other manufacturers will
    invalidate the guarantee, and Miele cannot accept liability.

    Correct use

    , Caution. The central spout and the steam valve present a
    danger of burning and scalding.
    The liquids and steam dispensed are very hot.
    Please note:
    – Keep well away from the area underneath the central spout and
    steam valve when hot liquids and steam are being dispensed.
    – Do not touch hot components.
    – The spouts can spray hot liquid or steam.
    – Water in the drip tray can be very hot. Take care when emptying
    it.

    , Danger of injury.
    Do not touch the brew unit when the machine is connected to the
    electrical supply.
    Do not clean the inside of the capsule plate opening.
    , Never look directly at the lighting or use optical instruments to
    look at it.
    ~ Clean the coffee machine and the cappuccinatore (milk frother)
    thoroughly before using for the first time (See "Cleaning and care").

    14



  • Page 15

    Warning and Safety instructions

    ~ Please note the following regarding water:
    – Only use cold, fresh tap water to fill the water container. Warm or
    hot water or other liquids could damage the machine.
    – Change the water every day to prevent a build-up of bacteria.
    – Do not use mineral water. Mineral water will cause serious
    limescale deposits to build up in your machine and damage it.
    – Do not use water from a reverse osmosis unit in this machine. This
    would damage it.

    ~ Do not put anything other than Nespresso coffee capsules in the
    capsule carousel. Other manufacturers' capsules etc. would
    damage the machine.

    ~ The coffee capsules must be intact before use. Do not use coffee
    capsules which are damaged, broken or dented. These could
    become jammed in the machine and damage it.

    ~ Do not use milk with additives. Sugar additives will stick to the
    milk pipework and damage the coffee machine and the
    cappuccinatore.

    ~ If using animal milk, use only pasteurised milk.
    ~ Never place a drink with ignited alcohol under the central spout of
    the coffee machine. The flames could ignite plastic components
    and cause fire damage.

    ~ Do not swing from or hang anything on the machine front when it
    is open as this could damage the machine.

    15



  • Page 16

    Warning and Safety instructions

    ~ Please note the following with regard to cleaning the coffee
    machine:
    – Clean the coffee machine and the cappuccinatore daily (see
    "Cleaning and care").
    – Do not use a steam cleaner to clean the machine. Steam could
    reach electrical components and cause a short circuit.
    – Descale the coffee machine regularly using the appropriate
    number of Miele descaling tablets for the water hardness level in
    your area. Descale the machine more frequently in areas with very
    hard water. The manufacturer cannot be held liable for damage
    arising from insufficient descaling.

    ~ Do not use the coffee machine or the cappuccinatore for cleaning
    other objects.

    For machines with a stainless steel front:

    ~ Do not use sticky notes, transparent adhesive tape, masking tape
    or other types of adhesive on stainless steel surfaces. These
    damage the surface, causing it to lose its dirt repellent protective
    coating.

    ~ The finish on stainless steel surfaces is susceptible to scratching.
    Even magnets can cause scratching.

    16



  • Page 17

    Preparing the coffee machine for use
    Please read the operating
    instructions and take the time to
    familiarise yourself with the coffee
    machine before using it for the first
    time.

    Before using for the first time
    ^ The machine must be correctly
    installed and connected (see
    "Electrical connection" and
    "Installation") before it is used for the
    first time.
    ^ Remove any protective foil.
    Clean the coffee machine thoroughly
    (see "Cleaning and care") before
    filling it with water and coffee
    capsules.

    Switching on for the first time
    When you switch the coffee machine on
    for the first time, you will be prompted
    to set the following:

    ^ Touch the arrow sensors until the
    country you want is highlighted.
    Touch the OK sensor.
    The setting is now saved.
    Setting the time of day
    ^ Touch the arrow sensors until the
    current hour appears. Touch the OK
    sensor.
    ^ Touch the arrow sensors until the
    current minutes appear. Touch the
    OK sensor.
    The setting is now saved.
    Setting the date
    ^ Touch the arrow sensors until the
    current year appears. Touch the OK
    sensor.
    ^ Touch the arrrow sensors until the
    current month appears. Touch the
    OK sensor.

    – Language and Country

    ^ Touch the arrow sensors until the
    current day appears. Touch the OK
    sensor.

    – Time of day

    The setting is now saved.

    – Date
    – Display (Time of day display)
    ^ Touch the On/Off sensor K.
    The welcome message "Miele Willkommen" will appear in the display
    briefly.
    Selecting the language
    ^ Touch the arrow sensors until the
    language you want is highlighted.
    Touch the OK sensor.
    17



  • Page 18

    Preparing the coffee machine for use
    Selecting the display

    Water hardness

    You can choose from the following
    options:

    The water hardness level indicates how
    much calcium is dissolved in the water.
    The higher the calcium content, the
    harder the water, and the harder the
    water, the more often the coffee
    machine will need to be descaled.

    – On: the display will always show the
    date and time (even when the
    machine is switched off).
    – Off: the date and time are not
    displayed when the machine is
    switched off.
    – Night dimming: the date and time
    are only displayed between the
    hours of 5:00 and 23:00.
    ^ Touch the arrow sensors until the
    option you want is highlighted.
    Touch the OK sensor.
    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.
    "Set-up successfully completed" will
    appear in the display.
    "Fill and replace the water container"
    will appear in the display.
    ^ Fill the water container with fresh,
    cold tap water.
    Tip: Please continue to work though the
    further steps outlined in the operating
    instructions so that you can familiarise
    yourself with the coffee machine and
    set it up for your specific requirements.

    18

    The coffee machine measures the
    quantity of water and steam used. The
    number of drinks which can be
    dispensed before the machine needs to
    be descaled will depend on the water
    hardness level set.
    Set the water hardness level on the
    coffee machine to the water hardness
    level for the local area to ensure that
    the machine functions correctly and is
    not damaged. This will ensure that the
    reminder to descale the machine will
    appear in the display at the correct
    time.
    The machine has four programmable
    levels:
    Water hardness

    Local water
    hardness
    level

    Setting
    (Hardness
    level)

    0 - 8.4 °dH
    (0 -1.5 mmol/l)

    Soft

    Soft

    8.4 - 14 °dH
    (1.5 - 2.5 mmol/l)

    Medium

    Medium

    14 - 21 °dH
    (2.5 - 3.7 mmol/l)

    Hard

    Hard

    > 21 °dH
    (> 3.7 mmol/l)

    Hard

    Very hard



  • Page 19

    Preparing the coffee machine for use
    Checking the water hardness level
    You can use the test strip supplied to
    check the water hardness level, or your
    local water supplier will be able to
    advise you on the hardness of the water
    in your area.

    ^ Dip the test strip in your drinking
    water for a second, then shake off
    any excess water. The result will be
    evident after about a minute.
    You can now set the water hardness
    level for the coffee machine.
    Setting the water hardness level
    ^ Touch X.
    ^ Touch the arrow sensors until "Water
    hardness" is highlighted. Touch the
    OK sensor.
    ^ Touch the arrow sensors until the
    hardness level you want is
    highlighted. Touch the OK sensor.
    The setting is now saved.

    19



  • Page 20

    Operation
    The coffee machine is operated by
    touching the sensors.
    You are in the drinks menu when the
    display shows:
    { Miele
    Cosi
    Ristretto

    To select an option, touch the X and Y
    arrow sensors to highlight the option
    you want.
    Touch the OK sensor to confirm your
    selection.
    Exiting a menu or cancelling an
    action

    Roma

    To exit the current menu, touch
    "Back" #.

    To prepare a drink, press one of the
    drinks sensors

    If none of the sensors has been
    touched for a while, the coffee machine
    will revert to the drinks menu.

    Calling up and navigating in a menu
    To call up a menu, touch the relevant
    sensor. You will be able to start actions
    or alter settings in the selected menu.

    Settings
    Language F
    Time of day
    Timer
    A scroll bar on the right hand side of
    the display indicates more options or
    text. These can be displayed using the
    arrow sensors.
    The setting which is currently selected
    will have a tick ( beside it.

    20



  • Page 21

    Filling the water container
    Warning. Bacteria can cause
    infection.
    It is important to empty and fill the
    container with fresh tap water every
    day to avoid the risk of bacteria
    building up.

    Only use fresh, cold tap water.
    Hot or warm water or other liquids
    could damage the coffee machine.

    ^ Open the front of the machine.

    Do not use mineral water. Mineral
    water will cause serious limescale
    deposits to build up in your machine
    and damage it.

    ^ Lift the water container up and pull it
    forwards to remove it.
    ^ Fill the water container with fresh,
    cold tap water up to the "Max." mark.
    ^ Push the water container into the
    machine until it clicks into place.
    Close the front.
    If the water container protrudes
    slighly or is a little high, check
    whether the surface that the water
    container sits on is dirty. If the water
    container is not positioned correctly,
    the outlet valve will not connect
    properly and could leak. Clean the
    surface, if necessary.
    21



  • Page 22

    Switching on and off
    Switching on

    Switching off

    ^ Touch the On/Off sensor K.

    ^ Touch the On/Off sensor K.

    Tip: If you do not want the water from
    the rinsing process to flow into the drip
    tray, place a suitable container
    underneath the central spout before
    preparing the first coffee of the day.

    If coffee has been dispensed, the
    coffee machine will carry out a rinse
    automatically before switching off.

    At first "Heating-up phase" appears in
    the display and after the coffee
    machine has heated up, the pipework
    is rinsed out. Hot water will be
    dispensed from the central spout.
    If the coffee machine still has an
    operating temperature higher than
    60 °C , then rinsing will not take
    place.

    Switching off for longer
    periods of time
    If the machine is not going to be used
    for a longer period of time, e.g. whilst
    on holiday
    ^ Empty the drip tray, the waste
    container and the water container.

    The machine will now align the capsule
    carousel and check the chambers. You
    will be able to hear this happening.
    When the different types of coffee
    appear in the display, you can prepare
    a drink.
    ^ Clean all components thoroughly,
    including the central spout cover a
    and the drip catcher b in the
    machine front.
    ^ Switch the machine off.
    If you are leaving the front open while
    the coffee machine is not in being
    used for a long time, disconnect it
    from the mains to save energy.

    22



  • Page 23

    Filling the machine with coffee capsules
    The Nespresso coffee capsules are
    loaded into the capsule carousel. The
    capsule carousel has five chambers,
    each holding four capsules.

    – or, if you are using different types of
    coffee, make sure you re-allocate the
    chambers (see "Allocating the types
    of coffee (Type allocation)").

    The five chambers can be filled with
    five different types of coffee. It is
    important to allocate the chambers
    correctly so that you can select the type
    of coffee you want to prepare.

    You can fill all of the chambers with the
    same type of coffee if you wish.
    ^ Open the front of the machine.

    Filling the capsule carousel
    This appliance can only be used
    with Nespresso coffee capsules
    available exclusively through the
    Nespresso Club or your Nespresso
    authorised representative.
    Nespresso quality is only
    guaranteed when Nespresso
    capsules are used in Nespresso
    appliances.
    Do not use Nespresso coffee
    capsules which are damaged,
    broken or bent up at the edges.
    They can get stuck in the machine
    and cause damage.
    Only the use of Nespresso capsules
    will guarantee the proper functioning
    and lifetime of your Nepresso
    machine.

    ^ Pull the carousel runners out as far as
    possible.
    When the coffee machine is switched
    on and the carousel runners are
    pulled out, the type of coffee
    allocated to the chamber is shown in
    the display. This allows you to
    allocate the coffee types correctly.
    Lift the capsule carousel to remove it or
    fill it while it is on the runners.

    So that you can select the different
    types of coffee from the display, make
    sure
    – that you fill the chambers with
    capsules of the appropriate coffee
    type.

    23



  • Page 24

    Filling the machine with coffee capsules
    The machine will now align the capsule
    carousel and check the chambers. You
    will be able to hear this happening.

    Taking capsules out of the
    capsule carousel
    ^ Pull the capsule runners out and
    remove the capsule carousel.

    ^ Make sure you put the capsules into
    the chambers of the capsule
    carousel correctly with the foil facing
    downwards.
    Please note that the individual
    capsules sit loosely in the capsule
    carousel to prevent them from
    becoming jammed.
    If you have removed the capsule
    carousel,

    ^ place it onto the carousel runners
    before pushing it back into the
    machine.
    ^ Push the carousel runners fully back
    into the machine and close the
    machine front.
    24

    ^ Push upwards on the ring underneath
    the carousel a and then remove the
    capsules b.



  • Page 25

    Making drinks
    Making espresso or coffee
    After a while, if no drink is selected
    "Two portions °" disappears from
    the display.

    Cancelling preparation
    Drink preparation can be cancelled
    while "Stop" is showing in the display.
    ^ Touch the OK sensor.
    Preparation will be cancelled.
    ^ Place a cup under the central spout.
    ^ Touch the arrow sensors until the
    type of coffee you want is
    highlighted.
    Now select the type of drink you want.
    ^ Touch ., / or y.
    The coffee or espresso will be
    dispensed into the cup.

    The preparation of the first of two
    portions can be stopped by touching
    the OK sensor once. The whole
    preparation can be cancelled by
    pressing the OK sensor for longer.

    After preparing drinks
    If coffee has been dispensed, the
    coffee machine will carry out a rinse
    automatically before switching off.

    Preparing two portions
    You can request two portions of
    espresso or coffee at once either in one
    cup or in two separate cups. The two
    portions will be dispensed one after
    the other.
    ^ Place a cup under the central spout.
    ^ Touch the arrow sensors until the
    type of coffee you want is
    highlighted.
    ^ Touch °.
    The ° sensor will now light up.
    ^ Touch ., / or y.
    Two portions of the desired drink will be
    dispensed from the central spout.
    25



  • Page 26

    Making drinks
    Preparing hot milk, milk froth
    and cappuccino

    ,Danger of burning and scalding
    on the steam valve.
    Steam and water produced are very
    hot.
    Do not place any part of your body
    under the steam valve when it is
    open.
    Do not touch hot components.
    The steam valve must engage in the
    lower position in order to connect
    properly with the cappuccinatore.

    The cappucinatore must always be
    assembled correctly with valve a
    above the handle and spout b at the
    side.
    The valve has two settings:

    If the steam valve was open, it will be
    a while before steam is produced. In
    Eco mode, particularly, the steam
    system needs to heat up first. No
    messages appear in the display
    during milk preparation.
    Notes on using the cappuccinatore
    Do not use milk with additives.
    Sugar additives will stick to the milk
    pipework and damage the coffee
    machine and the cappuccinatore.
    Tip: For best results use cold milk
    (below 13 °C).
    This machine comes with a
    cappuccinatore (milk frother) which
    makes it easy to prepare hot milk, milk
    froth and cappuccino.
    Before using the cappuccinatore for
    the first time, clean it thoroughly,
    preferably in a dishwasher (see
    "Cleaning and care").
    26

    }

    hot milk
    (turn it anti-clockwise)

    }

    milk froth
    (turn it clockwise)

    Turn the valve clockwise or
    anti-clockwise so that it is at one of
    the symbols. Setting it between the
    symbols will cause the milk to
    sputter.



  • Page 27

    Making drinks
    Milk can be frothed or dispensed
    straight into a cup, or heated or frothed
    into the cappuccinatore jug first and
    then poured manually into the cup. The
    spout must be pushed in or pulled out:

    ^ Place the cappuccinatore into the
    inset in the drip tray and place a
    cappuccino cup under the central
    spout.
    Milk spout pushed in (H) :
    Milk will be frothed and dispensed
    directly into the cup
    Milk spout pulled out (|):
    Milk will be frothed in the
    cappuccinatore jug
    Tip: Heating the milk in the
    cappuccinatore jug gives you hotter
    milk.
    Dispensing froth directly into the cup
    ^ Push the spout into the lid as far as it
    will go (H).
    ^ Turn the valve on the cappuccinatore
    clockwise to {.
    ^ Fill the cappuccinatore up to the
    upper mark with cold milk and
    replace the lid.

    ^ Push the steam valve downwards
    slowly and carefully to connect it to
    the cappuccinatore.
    ^ When you have enough froth in the
    cup push the steam valve up again.
    Steam release is controlled by a
    timer. If you have not got enough milk
    froth, and no more steam is emerging
    from the steam nozzle, push the
    steam valve up then push it back
    down again.

    27



  • Page 28

    Making drinks
    Preparing cappuccino

    Preparing hot milk

    ^ Dispense milk froth into the cup, as
    described above. Fill the cup 2/3 full
    with milk froth.

    ^ Turn the valve on the cappuccinatore
    anti-clockwise to }.

    ^ Touch the arrow sensors until the
    type of coffee you want is
    highlighted.
    ^ Touch . to make an espresso.
    Espresso will be dispensed from the
    central spout. The cappuccino is
    ready.
    Frothing milk in the cappuccinatore
    ^ Pull the spout out of the lid as far as it
    will go (|).
    ^ Turn the valve on the cappuccinatore
    clockwise to {.
    ^ Fill the cappuccinatore up to the
    lower mark with cold milk and
    replace the lid.
    ^ Place the cappuccinatore in the inset
    in the drip tray.
    ^ Push the steam valve downwards
    slowly and carefully to connect it to
    the cappuccinatore.
    ^ When you have sufficient froth push
    the steam valve up again.

    ^ Fill the cappuccinatore up to the
    upper mark with cold milk and
    replace the lid.
    ^ Push the milk spout in as far as it will
    go H (for frothing hot milk into a cup)
    or pull the milk spout out | (for
    frothing hot milk in the
    cappuccinatore jug) and place the
    cappuccinatore in the inset of the
    drip tray.
    ^ Push the steam valve downwards
    slowly and carefully to connect it to
    the cappuccinatore.
    Tip: Heating the milk in the
    cappuccinatore jug gives you hotter
    milk.
    After preparing milk
    Warning.
    Milk naturally contains bacteria
    which proliferate rapidly with
    inadequate cleaning. A dirty
    machine can be harmful to health.
    Clean the cappuccinatore and the
    steam valve regularly to avoid a
    build-up of bacteria.
    If more than an hour elapses between
    between milk preparations, dismantle
    and rinse the lid of the cappuccinatore
    and the glass jug. Milk residue can clog
    up the cappuccinatore.

    28



  • Page 29

    Making drinks
    Making drinks using a profile
    By using the profiles you can make
    your coffee or espresso exactly the way
    you like it (see "Profiles").
    If you have already set the machine up
    for a specific profile, you can select the
    profile first before dispensing a drink.
    ^ Touch {.
    ^ Touch the arrow sensors until "Select
    profile" is highlighted.
    Touch the OK sensor.
    ^ Touch the arrow sensors until the
    profile you want is highlighted.
    Touch the OK sensor.
    { John
    Cosi

    Y

    Ristretto
    Roma

    X

    The name of the profle selected will
    appear in the top of the display.
    Now you can prepare your chosen
    drink as described in "Making espresso
    or coffee".

    29



  • Page 30

    Allocating the types of coffee (Type allocation)
    There are 16 different types of
    Nespresso coffee available for use in
    this machine (as well as occasional
    "special" brands). They vary in taste,
    aroma and how they are roasted.
    Preparation time also affects the taste.
    You can store five different types of
    coffee in this machine (e.g. for five
    different users with different tastes).
    The capsule carousel has five
    chambers numbered from 1 to 5.
    The chambers are allocated a type of
    Nespresso coffee at the factory.

    Calling up "Type allocation"
    ^ Touch X.
    ^ Touch the arrrow sensors until "Type
    allocation" is highlighted. Touch the
    OK sensor.
    ^ Touch the arrow sensors until the
    chamber you want is highlighted.
    Touch the OK sensor.
    For this chamber you can now
    – Select type from the (factory default)
    types of coffee which have already
    been allocated to the coffee
    machine.
    – Allocate type if you want to enter the
    name of a new type of coffee.
    The following options are available if
    you have already allocated a chamber
    with a type of coffee yourself:
    – Change type, to change the name of
    a type of coffee and
    – Delete type, if you want to delete a
    type of coffee completely.
    30

    Select type
    ^ Touch the arrow sensors until "Select
    type" is highlighted. Touch the OK
    sensor.
    There will be a tick ( beside the type
    of coffee which is currently allocated to
    the chamber.
    ^ Touch the arrow sensors until the
    type of coffee you want is
    highlighted. Touch the OK sensor.
    The setting is now saved.

    Allocate type
    ^ Touch the arrow sensors until
    "Allocate type" is highlighted. Touch
    the OK sensor.
    Letters will now appear in the display.
    Use the arrows to select the letters you
    require. You can select numbers and
    upper and lower case letters using the
    arrow sensors.
    ^ Touch the arrow sensors to select the
    character you require. Touch the OK
    sensor.
    The character you have selected will
    appear in the display.
    ^ Repeat the process until the name of
    the type of coffee required appears
    in the top line of the display.
    Tip: If you make a mistake, touch # to
    delete the last character.



  • Page 31

    Allocating the types of coffee (Type allocation)
    When you have finished making your
    entry and want to save it,
    ^ touch the arrow sensors until the tick
    ( is highlighted. Touch the OK
    sensor.
    If you do not want to save your entry,
    ^ Touch # until all the characters have
    been deleted and the coffee machine
    returns to the previous selection.

    Change type
    You can only change the type of coffee
    for those types allocated in addition to
    the default types.

    Delete type
    You can only change the type of coffee
    for those types allocated in addition to
    the default types.
    ^ Touch the arrow sensors until "Delete
    type" is highlighted. Touch the OK
    sensor.
    ^ Use the arrow sensors to select the
    type of coffee you want to delete.
    ^ Touch the OK sensor.
    A tick ( will appear beside the type of
    coffee and after a short while the type
    will be deleted.

    ^ Touch the arrow sensors until
    "Change type" is highlighted. Touch
    the OK sensor.
    Now proceed as described in "Allocate
    type"
    – To delete a character, select #,
    – to enter new characters, select the
    relevant character and confirm with
    OK.
    – save the altered name by selecting (
    and touching the OK sensor.

    31



  • Page 32

    Changing the portion sizes
    The flavour of the coffee produced
    depends on the type of coffee, how
    finely the beans are ground and the
    quantity of water used. You can
    programme the amount of water used
    for each portion of espresso, coffee or
    hot water to suit your taste and your
    cups.
    A newly saved portion size applies to
    the currently selected drink type. It is
    not distinguished by coffee type or
    chamber.
    There is a maximum amount which can
    be programmed for each type of drink.
    Preparation stops when this is reached.
    The maximum amount possible for that
    type of drink will then be saved.
    The changed portion size is always
    saved in the current profile. The
    name of the current profile is shown
    in the top left of the display.
    There are two ways of programming the
    portion size, either:
    – with the drinks sensor while making a
    coffee, or
    – by selecting "Portion size" in the
    Settings menu.
    If there is insufficient water in the
    water container, the process will be
    stopped and the amount will not be
    saved.

    32

    Changing the portion size
    while making a drink
    Touch the ., / and y sensors for at
    least 3 seconds to start portion size
    programming.
    ^ Place the desired cup under the
    central spout.
    ^ Touch the sensor for the drink you
    want until "Change" appears in the
    display.
    The desired drink will be prepared and
    "Save" will appear in the display.
    ^ Touch the OK sensor when the cup
    has been filled to the level you want.
    The portion size you have saved will
    now be dispensed every time that
    particular drink is selected.
    Tip: You can cancel the portion size
    programming as long as "Stop" is
    visible in the display.



  • Page 33

    Changing the portion sizes
    Setting the portion size from
    the Settings menu

    Changing portion sizes for
    different profiles

    ^ Touch X.

    You can change the portion sizes for
    espresso, coffee and long coffee for
    each individual profile.

    ^ Touch the arrow sensors until "Portion
    size" is highlighted in the display.
    Touch the OK sensor.
    ^ Touch the arrow sensors until the
    coffee drink you want is highlighted.
    Touch the OK sensor.
    Now proceed to set the portion size as
    described under "Changing the portion
    size while making a drink".

    ^ Touch {.
    ^ Select the profile you want.
    The name of the current profile is
    shown in the top left of the display.
    Now you can proceed as described
    above, either by selecting "Portion size"
    in the Settings menu, or by changing
    the portion size while making a drink.

    33



  • Page 34

    Setting up profiles
    To cater for different tastes and
    preferences, you can enter up to 7
    individual profiles. For each individual
    profile you can select the portion sizes
    for each drink (see "Changing the
    portion sizes").
    { John
    Cosi

    Y

    Ristretto
    Roma

    X

    Create profile
    ^ Touch the arrow sensors until "Create
    profile" is highlighted in the display.
    Touch the OK sensor.
    Letters will now appear in the display.
    Use the arrows to select the letters you
    require. You can select numbers and
    upper and lower case letters using the
    arrow sensors.
    ^ Touch the arrow sensors to select the
    character you require. Touch the OK
    sensor.

    The name of the current profile is
    shown in the top left of the display.

    The character you have selected will
    appear in the display.

    Calling up a profile

    ^ Repeat the process until the name
    required appears in the top line of the
    display.

    ^ Touch {.
    The { sensor will now light up.
    You can now create a profile.
    If you have already created a profile in
    addition to the standard Miele profile,
    you have the following options:
    – Select profile from the profiles which
    are already allocated.
    – Change name, if you want to alter
    the name of a profile.
    – Delete profile, if you want to delete a
    profile.
    – Change profile, to programme the
    coffee machine so that it always
    changes back to the Miele standard
    profile or so that it retains the most
    recently selected profile.
    Tip: Touch # or { to return to the main
    menu.

    34

    Tip: If you make a mistake, touch # to
    delete the last character.
    When you have finished making your
    entry and want to save it,
    ^ touch the arrow sensors until the (
    tick symbol is highlighted. Touch the
    OK sensor.



  • Page 35

    Setting up profiles
    If you do not want to save your entry,
    ^ touch # until all characters have
    been deleted and the coffee machine
    returns to the previous selection.
    The most recently created profile is
    selected as the current profile.

    Select profile
    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.
    ^ Touch the arrow sensors until "Select
    profile" is highlighted in the display.
    Touch the OK sensor.
    ^ Touch the arrow sensors until the
    profile you want is highlighted.
    Touch the OK sensor.

    – save the altered name by selecting (
    and touching the OK sensor.

    Delete profile
    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.
    ^ Touch the arrow sensors until "Delete
    profile" is highlighted. Touch the OK
    sensor.
    ^ Use the arrow sensors to select the
    profile you want to delete.
    ^ Touch the OK sensor.
    A tick ( will appear beside the profile
    and after a short while the profile will be
    deleted.

    The name of the current profile is
    shown at the top of the display in the
    "Select drink" menu.

    Change name
    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.
    ^ Touch the sensor arrows until
    "Change name" is highlighted in the
    display. Touch the OK sensor.
    Now proceed as described in "Create
    profile".
    – to delete a character, select #,
    – to enter new characters, select the
    relevant character and confirm with
    OK.

    35



  • Page 36

    Setting up profiles
    Change profile
    You can programme the machine so
    that it always changes back to the
    Miele standard profile or so that it
    retains the most recently selected
    profile.
    This selection is only possible if you
    have already created a profile in
    addition to the standard Miele profile.
    ^ Touch the arrow sensors until
    "Change profile" is highlighted in the
    display. Touch the OK sensor.
    You now have the following options:
    – Manually: The currently selected
    profile will remain active until you
    select another profile.
    – After each use: The machine will
    automatically change back to the
    Miele standard profile after a drink is
    dispensed.
    – When switched on: Each time the
    machine is switched on it will
    automatically select the Miele standard profile regardless of user profile
    was selected before the machine
    was last switched off.
    ^ Touch the arrow sensors until the
    option you want is highlighted.
    Touch the OK sensor.

    36



  • Page 37

    Settings
    You can use the Settings menu to
    customise the coffee machine to suit
    your requirements.

    Calling up the Settings menu
    ^ Touch X.

    Changing and saving settings
    ^ Touch X.
    ^ Select the setting you want with the
    arrow sensors and touch the OK
    sensor.

    You can now check or alter settings.

    ^ Touch the arrow sensors until the
    setting you want is highlighted.

    Options which are currently selected
    will have a tick ( next to them.

    ^ Touch the OK sensor.
    The setting is now saved.

    Touch # to return to the menu
    above.
    Touch X to return to "Select drink".
    Tip: If you have switched on the time
    of day display or selected "Night
    dimming", you can alter settings
    without switching the coffee machine
    on by touching X.

    37



  • Page 38

    Settings
    Possible setting options
    The factory setting for the option is shown in bold.
    Option

    Available settings

    Language

    Deutsch, English and other languages
    Country

    Set the date

    Year/Month/Day

    Time of day

    Display
    Off / On / Night dimming
    Clock format
    12 h / 24 h
    Set

    Timer

    Timer 1
    Set
    switch on at / switch off after (1:00) / switch off at
    Days of the week
    Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
    Sunday / Accept
    Activate
    switch on at (Yes/ No) / switch off at (Yes / No)
    Timer 2
    Set
    switch on at / switch off at
    Days of the week
    Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
    Sunday / Accept
    Activate
    Switch on at (Yes / No) / switch off at (Yes / No)

    Type allocation

    Chamber 1
    Select type / Allocate type / Change type* / Delete type*
    Chamber 2
    Select type / Allocate type / Change type* / Delete type*
    Chamber 3
    Select type / Allocate type / Change type* / Delete type*
    Chamber 4
    Select type / Allocate type / Change type* / Delete type*
    Chamber 5
    Select type / Allocate type / Change type* / Delete type*

    Portion size

    Espresso
    Coffee
    Long coffee

    Eco mode

    On / Off

    38



  • Page 39

    Settings
    Option

    Available settings

    Lighting

    Brightness
    Machine switched on / machine switched off
    Switch off after

    Info

    Number of drinks
    Total no. of portions / Espresso / Coffee / Long coffee / Steam
    No. of uses until descaling

    System lock

    On / Off

    Water hardness

    Soft
    Medium
    Hard
    Very hard

    Display brightness
    Volume

    Buzzer tones
    Keypad tone

    Showroom programme

    Demo mode ( On/ Off)

    Factory default

    Do not reset
    Reset

    * Only appears when an additional coffee type has been allocated.

    39



  • Page 40

    Settings
    Language

    Setting the time

    You can select the language (and
    country variant of that language) for all
    the display text.

    Use the arrow sensors to set the hours
    and minutes.

    Tip: If you select the wrong language
    by mistake, follow the flag symbol F to
    find the Language option again.

    Date

    Time of day

    Timer

    You can set the time of day display, the
    clock format and the time.

    There are two timers with the following
    functions:

    Display (Time of day display)

    The coffee machine:

    You can choose from the following
    options:

    – switches on at a particular time, e.g.
    in the morning for breakfast ("Switch
    on at").

    – On: The time will still show in the
    display when the machine is
    switched off.

    – switches off at a particular time
    ("Switch off at")

    – Off: The time will not show in the
    display when the machine is
    switched off.
    – Night dimming: The time of day will
    only show in the display during the
    daytime.
    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.
    Clock format
    The options are:
    – 24-hour display (24 h)
    – 12-hour display (12 h)

    40

    Use the arrow sensors to set the year,
    month and day.

    – switches off after a particular length
    of time if none of the sensors have
    been touched or no drink has been
    prepared ("Switch off after"; Timer 1
    only).
    You can also allocate timer functions to
    individual days of the week.
    For "Switch on at" and "Switch off at",
    the timer must be activated and at
    least one day of the week allocated.



  • Page 41

    Settings
    Selecting a timer
    The options are:
    – Timer 1
    Switch on at, Switch off at, Switch off
    after
    – Timer 2
    Switch on at, Switch off at
    Switch on at:
    Please note that the coffee machine
    will not switch on at the required time
    if you have activated the system lock.
    Use the arrow sensors to set the hours
    and minutes.
    If the coffee machine has switched
    itself on using the "Switch on at"
    function 3 times and no drinks have
    been dispensed, the machine will not
    switch itself on again automatically.
    This prevents the coffee machine from
    switching itself on unnecessarily, for
    example whilst you are away on holiday.

    Switch off after
    The timer function "Switch off after" is
    only available in Timer 1.
    If none of the sensors have been
    touched or no drink has been
    prepared, the coffee machine will
    switch itself off after 30 minutes to save
    energy.
    You can change this to another time of
    between 15 minutes and 9 hours.
    Allocating days of the week
    Select the day of the week you want.
    The week day selected is marked with
    a 9 symbol.
    When all week days required are
    marked,
    ^ touch the X arrow sensor repeatedly
    until "Accept" is highlighted.
    Touch the OK sensor.

    The programmed times will, however,
    remain in memory and will be
    reactivated after manually switching the
    machine on again.
    Switch off at
    Use the arrow sensors to set the hours
    and minutes.
    The programmed times will remain in
    memory and will be reactivated after a
    long absence after manually switching
    the machine on again (See "Switch on
    at").

    41



  • Page 42

    Settings
    Activating and deactivating the timer

    Lighting

    If the timer is activated for "Switch on
    at", the symbol + and the desired
    switching-on time appear in the display
    23:59 hours before, as long as "On" or
    "Night dimming" are selected.

    You have the following options:

    When the system lock is activated,
    the "Switch on at" option for the timer
    will not work.
    Select the timer function you want. The
    timer function selected is marked with a
    9 symbol.
    ^ Touch the X arrow sensor repeatedly
    until "Accept" is highlighted.
    Touch the OK sensor.

    Eco mode

    – You can set the brightness when the
    machine is switched on.
    – You can set the brightness when the
    machine is switched off.
    – You can specify when the lighting
    should switch off ("Switch off after").
    Setting the brightness
    First select:
    – Machine switched on
    – Machine switched off
    Alter the brightness using the arrow
    sensors.
    To switch the lighting off:

    The Eco mode is an energy-saving
    mode. The steam system only heats up
    when steam is required for hot milk or
    milk froth.

    ^ touch the X arrow sensor, until no
    more segments are filled in and
    "Switched off" appears.

    With Eco mode switched off, milk froth
    or hot milk, and coffee or espresso can
    be made in rapid succession. The
    steam system remains heated up and
    this uses considerably more energy.

    Setting the time the lighting switches
    off (Switch off after)

    The altered energy consumption mode
    is displayed.

    You can adjust the length of time that
    the coffee machine remains lit after
    switching off.
    When the coffee machine is switched
    on, it remains lit for 10 minutes after the
    last action. This time cannot be altered.
    Use the arrow sensors to set the hours
    and minutes.

    42



  • Page 43

    Settings
    Info (Display information)

    Water hardness

    In the "Info" option, the number of
    portions prepared for each individual
    drink can be displayed.

    Please see "Preparing the coffee
    machine for use" for information about
    water hardness.

    You can also see whether more than 50
    portions can be dispensed before the
    machine needs to be descaled ("No. of
    uses until descaling").

    Display brightness
    Alter the Display brightness using the
    arrow sensors.

    To return to the previous display,
    ^ touch the OK sensor.

    Locking the coffee machine
    (System lock 0)
    You can lock the coffee machine to
    prevent it being used without your
    knowledge, by children, for example.
    Activating and deactivating the
    system lock 0
    When the system lock is activated,
    the "Switch on at" option for the timer
    will not work.
    To override the System lock
    When "Press the OK button for 6
    seconds to unlock" appears in the
    display,
    ^ Touch the OK sensor for 6 seconds.
    As soon as you switch the coffee
    machine off, the system lock will be
    activated again and the coffee
    machine is locked again.

    Volume
    You can alter the volume of the buzzer
    and keypad tones using the arrow
    sensors.
    To switch the tones off:
    ^ touch the X arrow sensor, until no
    more segments are filled in and
    "Switched off" appears.

    Factory default
    You can reset the settings back to the
    ones which were set when the coffee
    machine was delivered - the factory
    default settings.
    Please refer to the "Possible setting
    options" chart for the factory settings
    which are shown in bold.
    Please note that the following settings
    will not be reset:
    - Language
    - Time of day
    - Number of drinks (dispensed)
    - Profile
    - Portion size

    43



  • Page 44

    Settings
    Showroom programme (Demo
    mode)
    Do not activate this setting for
    domestic use!
    The coffee machine can be
    demonstrated in the showroom or at
    exhibitions in "demo mode". In this
    mode the machine lights up but no
    drinks are prepared or actions carried
    out.
    The coffee machine cannot be
    switched off with the
    On/Off sensor K when demo mode is
    activated.

    44



  • Page 45

    Cleaning and care
    Quick guide
    Clean the coffee machine every day to prevent a build-up of bacteria.
    Recommended
    frequency

    What do I have to do?

    After dispensing milk if it is
    going to be more than an
    hour until milk is dispensed
    again

    Rinse the lid of the cappuccinatore

    Clean the cappuccinatore
    Every day
    (usually at the end of the
    day, before the machine is
    switched off)

    Clean the water container
    Clean the waste container
    Clean the drip tray
    Clean the grille and the drip tray cover
    Clean the central spout cover

    Once a week
    (or more often if needed)

    Clean the capsule carousel and carousel runners
    Clean the small drip catcher inside the front of the machine
    Clean the inside of the machine
    Clean the steam valve
    Clean the front of the machine (especially straight after descaling)

    Once a month

    Clean the capsule plate (with a cleaning tablet)

    After approx. 15,000 drinks
    have been dispensed

    Replace the capsule hopper

    Depending on the hardness
    of the water

    Descale the machine

    Some components of the coffee machine are dishwasher safe. Cleaning these
    in the dishwasher frequently can cause them to become discoloured due to
    regular contact with food residues (e.g. tomatoes) in the dishwasher. The
    surface can also become damaged.
    All removable parts can be cleaned in the dishwasher except for:
    – Capsule plate
    – Plastic grille
    – Capsule carousel and carousel runners

    45



  • Page 46

    Cleaning and care
    ,Danger of burning.
    Always allow the machine to cool
    down before cleaning. Please be
    aware that water in the drip tray will
    be hot.
    Switch the machine off before
    cleaning the interior.
    Do not clean the inside of the
    capsule plate opening.
    Do not use a steam cleaner to clean
    the machine. Steam could reach
    electrical components and cause a
    short circuit.
    To avoid damaging the surfaces of
    your machine, do not use:
    – cleaning agents containing soda,
    ammonia, acids or chlorides,
    – solvent-based cleaning agents,
    – cleaning agents containing
    descaling agents,
    – stainless steel cleaning agents,
    – dishwasher cleaner,
    – oven cleaner,
    – abrasive cleaning agents, e.g.
    powder cleaners and cream
    cleaners,
    – hard, abrasive sponges, e.g. pot
    scourers, brushes or sponges which
    have been previously used with
    abrasive cleaning agents,
    – melamine eraser blocks,
    – sharp metal scrapers.
    46

    Rinsing the coffee machine
    If coffee has been dispensed, the
    coffee machine will carry out a rinse
    automatically before switching off to
    remove any remaining coffee residue.
    You can however also rinse the coffee
    pipework manually.
    ^ Touch y.
    ^ Touch the arrow sensors until "Rinse
    appliance" is highlighted in the
    display. Touch the OK sensor.
    The machine will be rinsed out.

    Water container
    Change the water every day to prevent
    a build-up of bacteria.
    ^ The water container can be cleaned
    in the dishwasher or by hand using
    hot water and a little washing-up
    liquid. After cleaning, dry the water
    container.
    ^ Carefully clean the surface the water
    container sits on, taking special care
    to clean the recesses properly.
    Make sure that the valve, the
    underside of the water container and
    the surface the water container sits
    on are clean. Otherwise the water
    container will not sit correctly.



  • Page 47

    Cleaning and care
    Waste container
    Clean the drip tray and waste
    container every day to avoid
    unpleasant odours and mildew.
    The waste container will usually contain
    some residual water from the rinsing
    process.
    ^ Lift the waste container and pull it
    forwards to remove.
    ^ The waste container can be cleaned
    in the dishwasher or by hand using
    hot water and a little washing-up
    liquid. Dry with a cloth.

    Drip tray with grid
    Clean the drip tray every day to
    avoid unpleasant odours and
    mildew.
    A message will appear in the display
    when the drip tray is full and needs to
    be emptied. Remove the tray and
    empty it at the latest when this
    message appears.

    ,Danger of burning. If the rinsing
    process is in progress, wait a while
    before removing the drip tray as the
    water used for rinsing will run out of
    the central spout.
    The water in the drip tray can be
    very hot. Take care when emptying
    it.

    ^ Also thoroughly clean the now
    accessible area in the machine
    where the waste container sits.
    Ensure that the space to the top right
    and left (see arrows) is clean.
    otherwise the machine will not be
    able to detect that the waste
    container is present or requires
    emptying.
    ^ Push the waste container into the
    machine.

    ^ Open the front of the coffee machine.
    Remove the drip tray from the
    machine with care.
    The grid in the drip tray prevents the
    water from spilling out of the tray
    when it is being carried.

    47



  • Page 48

    Cleaning and care
    ^ The drip tray and grid can be
    cleaned in the dishwasher or by hand
    using hot water and a little
    washing-up liquid. Dry all parts
    thoroughly.

    Grille with drip tray cover

    Make sure that the metal contact
    discs on the drip tray are cleaned
    and dried properly. The discs will
    not be able to detect that the drip
    tray is full if they are dirty or damp.
    ^ Clean the space under the drip tray
    ^ Push the drip tray back into the
    coffee machine.
    Make sure the drip tray has been
    pushed right into the machine as far
    as it will go.

    ^ Take out the grille and the drip tray
    cover.
    ^ Clean the plastic grille by hand using
    hot water and a little washing-up
    liquid.
    ^ The metal drip tray cover can be
    cleaned in the dishwasher or by hand
    using hot water and a little
    washing-up liquid.
    ^ Dry all parts thoroughly and replace
    them.

    48



  • Page 49

    Cleaning and care
    Capsule carousel and
    carousel runners

    ^ Also clean the area under the
    carousel runners.
    ^ Open the front of the coffee machine.
    Pull the carousel runners out as far as
    possible and remove the capsule
    carousel.

    It is particularly important to clean
    the sensor which is used to recognise the capsule chambers as well
    as the recess in the floor.
    ^ Dry everything with a soft cloth.
    ^ Place the carousel runners on the
    guide rails.
    ^ Insert the capsule carousel.
    ^ Push the carousel runners with the
    capsule carousel fully back into the
    machine.

    ^ Lift the carousel runner up at the front
    a little and then pull it out completely.
    ^ Clean the capsule carousel and
    carousel runners by hand using hot
    water and a little washing-up liquid.
    Dry all parts thoroughly and replace
    them.

    49



  • Page 50

    Cleaning and care
    Central spout cover and drip
    catcher
    ^ Open the front of the coffee machine.

    ^ Push the cover back onto the central
    spout.

    Interior
    Take all removeable parts out of the
    interior and
    ^ clean the interior with a solution of
    lukewarm water and a little
    washing-up liquid.
    ^ Dry the interior using a soft cloth.
    ^ Replace all parts in the machine.

    ^ Push up and remove the cover in the
    middle of the inside of the machine
    front.
    ^ The cover can be cleaned in the
    dishwasher or by hand using hot
    water and a little washing-up liquid.

    Also clean the small drip catcher in the
    lower part of the inside of the front of
    the machine thoroughly.
    ^ Clean the inside of the machine front
    with a solution of hot water and
    washing-up liquid.
    ^ Dry all parts thoroughly.
    50



  • Page 51

    Cleaning and care
    Capsule plate
    How quickly the capsule plate
    becomes soiled will depend on the
    content of natural oils in the coffee
    used.
    It should be cleaned once a month (or
    more often, if necessary) using the
    cleaning tablets supplied with the
    machine, and at the latest, when the
    machine is descaled.
    The cleaning tablets for degreasing the
    capsule plate have been specially
    formulated for use in this coffee
    machine and are available from your
    Miele dealer or Miele (see "Optional
    accessories").

    ^ Once all the coffee remains have
    been removed, rinse it thoroughly
    and dry it.
    ^ Push the capsule plate back into the
    machine until it clicks into place.

    Steam valve
    The small rubber sleeve which
    connects the steam valve and
    cappuccinatore can be removed for
    cleaning. The sleeve and also the tip of
    the steam valve underneath should be
    cleaned regularly.

    ,Danger of burning and scalding.
    Even when the coffee machine is
    switched off, hot steam and liquid
    can escape.
    After pushing the steam valve down,
    wait a moment before removing the
    rubber sleeve and cleaning the
    valve.
    ^ Open the front of the coffee machine.

    ^ Open the front of the coffee machine.
    ^ Press on the handle a, and pull the
    capsule plate forwards to remove it.
    ^ Fill a small container with hot water
    and dissolve one cleaning tablet in it.
    ^ Place the capsule plate in the
    cleaning solution and leave for
    approx. one hour.

    51



  • Page 52

    Cleaning and care
    Cappuccinatore
    Clean the cappuccinatore regularly,
    preferably once a day after use. The lid
    of the cappuccinatore can be
    dismantled for cleaning. It is best to
    clean the cappuccinatore in the
    dishwasher if possible - all parts are
    dishwasher safe.
    ^ Dismantle the cappuccinatore lid.
    Remove the spout and valve.
    ^ Push the steam valve down and pull
    the rubber sleeve off.
    ^ Use a mild solution of hot water and
    washing-up liquid to clean the rubber
    sleeve and the tip of the steam valve.
    ^ Dry them and then put the sleeve
    back onto the tip of the steam valve.
    Make sure that the sleeve sits
    securely on the tip.
    ^ Push the steam valve back upwards.
    If you forget to push it back up, it
    could break when you shut the
    machine front.

    52

    The valve can only be removed when
    the dot is in the middle position
    between the hot milk symbol } and
    the milk froth symbol {.
    ^ All the lid components and the glass
    jug can be cleaned in the dishwasher
    or by hand using hot water and a little
    washing-up liquid.



  • Page 53

    Cleaning and care
    Machine front
    If soiling is not removed promptly it
    could cause the surface of the
    machine to alter or discolour.
    Remove any soiling immediately.
    Make sure that water cannot get in
    behind the display.

    ^ Reassemble the parts of the lid as
    shown.
    Check that the cappuccinatore is
    correctly assembled
    – and that there is no gap between the
    two parts of the lid.
    – Also make sure that the reassembled
    lid is fitted onto the capuccinatore
    jug correctly. The valve sits above
    the cappuccinatore handle. If this is
    not the case, the cappuccinatore will
    not operate correctly.

    All external surfaces are susceptible
    to scratching. Scratches on glass
    surfaces could even cause a
    breakage.
    Contact with unsuitable cleaning
    agents can discolour the surfaces.
    Wipe up any spillages or splashes
    of descaling agent immediately.
    ^ Switch the machine off with the
    On/Off sensor K.
    ^ Clean the casing with a clean, soft
    sponge and hot water with a little
    washing-up liquid. Dry using a soft
    cloth.
    Tip: You can also use a microfibre cloth
    to clean the front.

    53



  • Page 54

    Cleaning and care
    Maintenance
    The capsule hopper in the brew unit
    needs to be replaced after approx.
    15,000 coffee capsules have been
    dispensed. Replacement capsule
    hoppers are available from your Miele
    dealer or from Miele (see "Optional
    accessories").
    ^ Touch y.
    ^ Touch the arrow sensors until
    "Maintenance" is highlighted in the
    display. Touch the OK sensor.
    The capsule hopper inside the machine
    will be lowered. "Remove capsule plate
    and change the capsule hopper" will
    then appear in the display.

    ^ Insert the maintenance tool into brew
    unit a from below and turn capsule
    hopper b to the left to remove it.

    ^ Open the front of the coffee machine.
    ^ Take out the capsule plate.

    ,Danger of injury.
    Do not reach into the openings in
    the brew unit.
    ^ Screw the new capsule hopper to the
    right into position in the brew unit, as
    shown above. The spring with the
    ball must be inserted in the capsule
    hopper so that the ball is at the top.
    ^ Replace the rubber connector and
    the capsule hopper.
    ^ Insert the capsule plate and close the
    machine front.
    ^ Pull the rubber connector
    downwards.

    54



  • Page 55

    Descaling
    Warning. When descaling the
    machine, cover delicate surfaces
    and natural flooring or place a tea
    towel over the waste container to
    prevent damage from splashes of
    descaling solution.
    Ensure that any splashes of
    descaling solution are wiped up immediately.

    When 0 is reached, the coffee machine
    will lock out. "Start descaling?" will
    appear in the display.
    You can switch the coffee machine off if
    you do not want to run the descaling
    programme at this time. However, you
    will not be able to make any more
    drinks until the descaling programme
    has been carried out.
    For descaling you will need:

    Limescale builds up in the coffee
    machine during use. How often, will
    depend on the hardness of the local
    water supply. Limescale must be
    removed regularly.
    The machine will guide you through the
    descaling procedure. Various
    instructions will appear in the display,
    e.g. you will be prompted to empty the
    drip tray, fill the water container, etc.
    Descaling must be carried out. The
    programme takes approx. 12 minutes.
    During the descaling programme, water
    containing descaling agent will run out
    of the central spout and steam valve.
    This is followed by an activation period
    before a little more descaling agent is
    dispensed.
    The coffee machine will remind you
    when the descaling programme needs
    to be carried out. The following
    message will appear in the display:
    "No. of uses until descaling: 50". The
    remaining number of drinks that can be
    made before descaling will now show in
    the display after each drink is made.

    – the red descaling funnel and
    – Miele descaling tablets.

    Descaling after being
    prompted by the display
    ^ Touch the OK sensor to start the
    descaling process.
    The descaling process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.
    Descaling solution
    The descaling tablets supplied have
    been specially formulated for use with
    this coffee machine. They are available
    from Miele (see back cover for contact
    details) or via the internet from
    www.miele-shop.com.
    You will need two descaling tablets for
    each descaling process.

    ^ Confirm the message by touching the
    OK sensor.

    55



  • Page 56

    Descaling
    Only use the Miele descaling
    tablets. Other types of descaling
    agents will damage the coffee
    machine and affect the taste.

    When "Remove capsule plate Insert
    descaling funnel and close the door"
    appears,

    ^ Follow the instructions given in the
    display.
    ^ Fill the water container up to the k
    mark with lukewarm water.
    ^ Drop two descaling tablets in the
    water.
    Follow the instructions for the mixing
    ratio carefully. It is important that you
    fill the water container with the
    correct amount of water (not less or
    more), otherwise descaling will be
    cut short and must then be repeated.

    ^ remove the capsule plate and
    replace it with the red descaling
    funnel.
    Please follow the instructions which
    appear in the display.

    ^ Replace the water container.

    Tip: Place the waste container under
    the central spout and the steam valve.

    56



  • Page 57

    Descaling
    When "Rinse the water container and fill
    with fresh water up to the k symbol"
    appears,
    ^ remove the water container and rinse
    it carefully with clean water. Make
    sure that no descaling agent is left in
    the water container. Also empty the
    waste container.

    Descaling without being
    prompted by the display
    ^ Touch y.
    ^ Use the arrow sensors to highlight
    "Descale".
    The descaling process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.

    Descaling is finished when "Empty the
    drip tray and clean the contacts.
    Process finished" appears in the
    display.

    ^ Touch the OK sensor.

    ^ Touch the OK sensor.

    The descaling process will begin.

    The coffee machine has now been
    descaled and can be used for making
    drinks again.
    When descaling the machine, wipe
    up any spillages or splashes of
    descaling agent immediately. These
    would damage the surface.

    57



  • Page 58

    Problem solving guide
    With the aid of the following guide, minor problems can be easily corrected
    without contacting Miele.

    ,Warning. Do not open the outer casing of the machine.
    Repairs may only be carried out by a suitably qualified and competent person
    in strict accordance with national and local safety regulations. Repairs and
    other work by unqualified persons can cause considerable danger to users.
    The manufacturer cannot be held liable for unauthorised work.
    If you cannot resolve the problem following these instructions please contact Miele
    (see back cover for contact details).

    Messages in the display
    ^ Follow the instructions to remedy the problem.

    Message

    Possible cause and remedy

    Fault 1 to
    Fault 4
    Fault 80 to
    Fault 83

    There is a fault.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for one hour and then switch it back on again.

    Fault 71

    The capsule carousel is jammed and cannot turn properly.
    ^ Open the front of the coffee machine.

    If the fault message appears in the display again, contact
    Miele.

    ^ Pull the carousel runners out and check whether one of the
    capsules is not positioned correctly in the carousel.
    ^ If all capsules are correctly positioned, push the carousel
    back into the machine.
    ^ Close the front.
    If the fault message appears in the display again, contact
    Miele.

    58



  • Page 59

    Problem solving guide
    Message

    Possible cause and remedy

    Fault 72

    A coffee capsule has become jammed between the capsule
    carousel and the capsule plate.
    ^ Try to remove the capsule plate.
    ^ Look for the capsule in the brewing area and try to remove
    it. Dispose of this coffee capsule as it is likely to be
    damaged or dented and could become stuck again if
    reused.
    ^ Insert the capsule plate and close the front of the coffee
    machine.
    If the message appears again or if you cannot remove the
    capsule, contact Miele.

    Fault 73
    Fault 76

    The coffee capsule was not pushed onto the capsule plate
    correctly and could have been damaged.
    ^ Open the front and remove the waste container, the
    capsule carousel and the carousel runners.

    ^ There is an opening to the right of the slot for the capsule
    plate. Check if a coffee capsule has become stuck there.
    If a coffee capsule is lying on the capsule plate:
    ^ Push the coffee capsule with the handle of a wooden
    spoon or similar item back into the waste container.
    ^ Replace all parts and close the machine front.

    59



  • Page 60

    Problem solving guide
    Message

    Possible cause and remedy

    Fault 73
    Fault 76

    There is no coffee capsule on the capsule plate:
    The capsule is probably stuck in the brew unit.

    ,Danger of injury. Do not touch the brew unit. Only use
    a wooden spoon handle or similar to do this.

    ^ Try to remove the coffee capsule from the upper area of
    the brew unit using a wooden spoon handle or similar.
    ^ Replace all parts and close the machine front.
    If the message appears again or if you cannot remove the
    capsule, contact Miele.

    60



  • Page 61

    Problem solving guide
    Message

    Possible cause and remedy

    Fault 75

    The sensors which recognise the waste container are dirty.
    ^ Remove the waste container and clean the interior where it
    is located. Ensure that the space to the top right and left is
    clean.
    ^ Push the waste container into the machine as far as it will
    go. Close the front.
    The coffee capsule was not pushed onto the capsule plate.
    ^ Open the machine front and remove the capsule carousel
    and carousel runners.
    ^ Clean the area under the carousel runners. It is particularly
    important to clean the sensor which is used to recognise
    the capsule chambers as well as the recess in the floor.
    Dry everything with a soft cloth.
    ^ Replace all parts and close the machine front.
    The coffee capsule was not pushed onto the capsule plate
    correctly and could have been damaged.
    ^ Open the machine front and remove the capsule carousel
    and carousel runners.

    ^ There is an opening to the right of the slot for the capsule
    plate. Check whether a coffee capsule is lying on top of
    the capsule plate.

    61



  • Page 62

    Problem solving guide
    Message

    Possible cause and remedy

    Fault 75

    ^ Push the coffee capsule with the handle of a wooden
    spoon or similar item back into the waste container.
    ^ Close the machine front.
    If the message appears again or if you cannot remove the
    capsule, contact Miele.

    "Push water
    container right in"

    The water container has not been correctly positioned inside
    the machine.
    ^ Remove the water container and replace it.
    This fault message also appears if the water container was
    not correctly filled and positioned for descaling.
    ^ Fill the water container with fresh tap water up to the F
    symbol and start the descaling process again.
    If the fault message appears in the display again, contact
    Miele.

    "Empty drip tray"
    appears in the
    display although
    the drip tray has
    been emptied.

    The drip tray has not been correctly positioned inside the
    machine.
    ^ Push the drip tray back in as far as it will go.
    The sensors on the drip tray are not working properly.
    ^ Switch the machine off with the On/Off sensor K.
    The metal contact discs are dirty.
    ^ Clean and dry the metal contacts thoroughly (see
    "Cleaning and care - Drip tray with grid").
    If the fault message appears in the display again, contact
    Miele.

    62



  • Page 63

    Problem solving guide
    Unusual performance of the coffee machine
    Problem

    Possible cause and remedy

    When the coffee
    machine is
    switched on the
    lighting does not
    come on.

    The lighting has been switched off.
    ^ Switch it back on (see "Settings - Lighting").

    The display
    remains dark when
    the coffee machine
    is switched on
    using the On/Off
    sensor K.

    The lighting is faulty.
    ^ Call Miele.
    The On/Off sensor K was not touched for long enough.
    ^ Touch the depression in middle of the On/Off sensor K
    for at least 2 seconds.
    The plug is not inserted in the socket correctly.
    ^ Insert the plug in the socket correctly and switch on.
    The main fuse has tripped due to a problem with the coffee
    machine, the electricity supply or another appliance.
    ^ Switch off at the wall socket and unplug it.
    ^ Contact a qualified electrician or Miele.

    The coffee machine The switching off time programmed using the timer has
    switches off
    been reached.
    suddenly.
    ^ If required, you can select a new switching off time (see
    "Settings - Timer").
    The plug is not inserted in the socket correctly.
    ^ Insert the plug in the socket correctly and switch on.
    The lighting
    suddenly switches
    off.

    The lighting will switch itself off automatically after 10
    minutes, if the coffee machine is not used for a certain
    length of time.

    The sensors do not There is a fault.
    react to touch. You ^ Open the front of the coffee machine.
    cannot operate the
    The current process is stopped.
    coffee machine.
    ^ Disconnect the coffee machine from the power supply.

    63



  • Page 64

    Problem solving guide
    Problem

    Possible cause and remedy

    The coffee machine
    does not switch
    itself on, although
    the "Switch on at"
    setting has been
    activated for the
    timer.

    The system lock is activated.
    ^ Deactivate the system lock (see "Settings - System lock").
    The day of the week has not been selected.
    ^ Check the timer settings and change these if necessary
    (see "Settings - Timer").
    The machine was not used after being switched on
    automatically 3 times in succession.
    ^ Switch the machine on and make a drink.

    You cannot read
    the display.

    The display brightness has been set too low.
    ^ Adjust the brightness (see "Settings - Display brightness")

    The machine front
    will not open or
    close.

    The steam valve is not closed and is not in the upper
    position.
    ^ Push the steam valve right down and then push it
    upwards as far as it will go.
    The hinges are not aligned correctly.
    ^ Adjust the hinges (see "Installation - Adjusting the
    hinges").

    The machine does
    not rinse when it is
    switched on.

    If the coffee machine still has an operating temperature
    higher than 60 °C , then rinsing will not take place.

    The date and time
    of day must be
    reset.

    If the coffee machine is disconnected from the electrical
    supply or in the case of a power cut, the date and time of
    day will be saved for at least 3 days. After that, they must
    be reset. Timer settings are not lost.

    Coffee preparation
    is interrupted.

    A double portion was selected.
    The machine uses two capsules for double portions.
    However, if only one capsule of the selected capsule type
    remains in the capsule carousel, preparation is interrupted.
    ^ Replenish the coffee capsules.

    64



  • Page 65

    Problem solving guide
    Problem

    Possible cause and remedy

    Drinks are not
    dispensed, even
    though there are
    coffee capsules in
    the capsule
    carousel and there
    is enough water in
    the water container.

    The water container is not positioned correctly inside the
    machine.
    ^ Remove the water container and replace it.
    A coffee capsule has jammed in the capsule carousel.
    ^ Open the front of the coffee machine.
    ^ Pull the carousel runners out, lift the capsule carousel
    upwards and release the coffee capsules so that they
    can move without hindrance.
    ^ Replace the capsule carousel on its runners, and push
    the runners as far as they will go into the machine. Close
    the front.

    While carrying out
    the procedure for
    changing the
    portion size
    (programming the
    amount of water
    used for a drink),
    the drink stops
    being dispensed.

    The maximum possible water quantity was reached.
    Preparation is halted and the maximum portion size
    possible will be saved.
    There is insufficient water in the water container. The
    process for changing the portion size will be cancelled and
    the portion size will not be saved.
    ^ Remove the water container, fill and replace it and carry
    out the procedure for changing the portion size again.

    The descaling
    The descaling process cannot be cancelled once you have
    programme was
    touched the OK sensor.
    started by mistake. The process has to be carried through to the end. This is a
    safety measure to ensure that the machine is fully
    descaled, and is important for the long-term protection of
    the machine and to ensure it functions correctly.
    ^ Descale the coffee machine (see "Descaling").

    65



  • Page 66

    Problem solving guide
    Problem

    Possible cause and remedy

    Milk (steam) and
    espresso / coffee
    cannot be prepared
    at the same time.

    The energy-saving Eco mode is activated. In this mode, the
    steam system is heated up for preparing hot milk or milk
    froth. After preparation the steam system will cool down
    again.
    If you want to prepare milk without having to wait until the
    steam system has heated up,
    ^ switch off "Eco mode" in the "Settings" menu.
    If Eco mode is deactivated, the steam system will remain
    heated and you can prepare drinks made with milk without
    the need for heating up beforehand. However, with Eco
    mode deactivated, the coffee machine will use
    considerably more energy.

    Eco mode is
    switched on.
    However, milk
    (steam) and
    espresso / coffee
    can still be
    prepared at the
    same time.

    If the steam system is still heated up, milk (steam) and
    espresso / coffee can be prepared at the same time.
    When the steam system has cooled down, milk (steam) and
    espresso / coffee can only be prepared one after the other
    (not at the same time).

    The steam valve
    has been pushed
    downwards and has
    engaged with the
    cappuccinatore, but
    no steam is coming
    out. Milk is not
    being heated or
    frothed.

    If the steam valve was open, it will be a while before steam
    is produced. The steam system needs to heat up again. No
    instructions appear in the display.
    If you want to prepare milk without having to wait until the
    steam system has heated up,
    ^ switch off "Eco mode" in the "Settings" menu.
    If Eco mode is deactivated, the steam system will remain
    heated and you can prepare drinks made with milk without
    the need for heating up beforehand. However, with Eco
    mode deactivated, the coffee machine will use
    considerably more energy.
    The steam valve is not properly engaged with the
    cappuccinatore.
    ^ Push the steam valve upwards then back down again so
    that it clicks into place.

    66



  • Page 67

    Problem solving guide
    Problem

    Possible cause and remedy

    The steam valve
    The steam valve is blocked.
    has been pushed
    ^ Open the front of the coffee machine.
    downwards and
    has engaged with ^ Push the steam valve back down again, and pull the
    rubber sleeve off.
    the
    cappuccinatore,
    but no steam is
    coming out. Milk is
    not being heated or
    frothed.

    ^ Using the small end of the tool for removing the capsule
    hopper, turn the tip of the steam valve to the left to
    remove it.
    ^ Clean the tip thoroughly and then screw it back on again.
    No milk froth is
    coming out of the
    cappuccinatore.

    The spout in the lid is pulled out (|). Milk will be frothed in
    the cappuccinatore jug.
    ^ Push the spout back in (H).
    The cappuccinatore lid is incorrectly assembled.
    ^ See "Cleaning and care - Cappuccinatore" for more
    information.
    The milk system of the cappuccinatore is blocked.
    ^ Clean the cappuccinatore thoroughly (see "Cleaning and
    care - Cappuccinatore").

    67



  • Page 68

    Problem solving guide
    Unsatisfactory results
    Problem

    Possible cause and remedy

    Coffee residue is
    left behind in the
    coffee cups.

    The capsule plate is dirty.

    The coffee is not
    hot enough.

    The cup has not been pre-heated.
    Pre-heat the cups, e.g. with hot water.
    The smaller and thicker the cup, the more important it is to
    pre-heat it.

    The coffee is
    weak.

    Too much water was saved as the portion size for the type
    of coffee capsule used.
    ^ Change the portion size (see "Changing the portion size").

    The preparation
    time and colour of
    the coffee varies.

    The preparation time, colour and taste of the coffee will vary
    depending on the type of coffee capsule and the type of
    drink selected (espresso, coffee and long coffee). This is not
    a fault.
    ^ Please follow the recommendations for the individual
    capsule types (see packaging for more details).

    There is residual
    water in the waste
    container.

    The water is left over from the brewing and cleaning
    process. This is not a fault.

    ^ Clean the capsule plate (see "Cleaning and care").

    The heating-up
    The coffee machine need to be descaled.
    time is getting
    ^ Descale the coffee machine (see "Descaling").
    longer, the amount
    of water being
    dispensed is no
    longer correct and
    the coffee
    machine is not
    performing
    properly.

    68



  • Page 69

    After Sales / Guarantee
    In the event of a fault which you cannot
    correct yourself, or if the appliance is
    under guarantee, please contact:
    – your Miele Dealer
    or
    – Miele (see back cover for contact
    details).
    Please note that telephone calls may
    be monitored and recorded for
    training purposes (UK only).

    When contacting your Dealer or Miele,
    please quote the model and serial
    number of your machine. These are
    shown on the data plate inside the
    machine.
    N.B. A call-out charge will be applied
    for service visits where the problem
    could have been resolved as described
    in these instructions.

    Guarantee
    For information on the appliance
    guarantee specific to your country
    please contact Miele. See back cover
    for address.
    In the U.K. your coffee machine is
    guaranteed for 2 years from the date of
    purchase. However, you must activate
    your cover by calling 0845 365 6640 or
    registering online at www.miele.co.uk.

    69



  • Page 70

    Saving energy
    Changing the following settings from
    their factory default will increase the
    energy consumption of the coffee
    machine:
    – Eco mode
    – Lighting
    – Time of day display
    – Timer
    When altering these settings, the
    message "This setting increases energy
    consumption" will appear in the display.

    70



  • Page 71

    Electrical connection U.K., ZA, IRL
    All electrical work should be carried out
    by a suitably qualified and competent
    person only, in strict accordance with
    current national and local safety
    regulations (BS 7671 in the UK).
    Installation, repairs and other work by
    unqualified persons could be
    dangerous. The manufacturer cannot
    be held liable for unauthorised work.
    Ensure power is not supplied to the
    machine until after installation work has
    been carried out.
    The voltage and frequency are given on
    the data plate. Please ensure these
    match the household mains supply. The
    fuse rating is quoted on the plug.

    Non-rewireable plugs BS 1363
    The fuse cover must be refitted when
    changing the fuse, and if the fuse cover
    is lost, the plug must not be used until a
    suitable replacement is obtained. The
    colour of the correct replacement cover
    is that of the coloured insert in the base
    of the plug, or the colour that is
    embossed in words on the base of the
    plug (as applicable to the design of
    plug fitted).
    Replacement fuses should be ASTA
    approved to BS 1362 and have the
    correct rating. Replacement fuses and
    fuse covers may be purchased from
    your local electrical supplier.

    The machine is supplied with a mains
    cable with moulded plug for connection
    to a 230 - 240 V mains supply.

    Do not connect the machine to an
    inverter such as those used with an
    autonomous energy source e.g. Solar
    power.

    Connection should be made via a fused
    plug and suitable switched socket
    which is easily accessible after
    installation.

    When switched on peak loads in the
    system can cause the safety switch off
    mechanism to be triggered. This can
    damage the electronic unit.

    Do not connect via an extension lead.

    The machine must not be used with
    so-called Energy saving devices
    either. These reduce the amount of
    energy supplied to the machine
    causing it to overheat.

    For extra safety it is advisable to protect
    the appliance with a suitable residual
    current device (RCD). Contact a
    qualified electrician for advice.
    If the socket is not accessible after
    installation (depending on country) an
    additional means of disconnection must
    be provided for all poles.
    WARNING: THIS APPLIANCE
    MUST BE EARTHED

    71



  • Page 72

    Installation
    Building-in and combination options
    This machine is designed to be builit into a tall unit

    or in a wall unit.

    72



  • Page 73

    Installation
    It can also be combined with other
    Miele built-in appliances. If the coffee
    machine is to be built in above another
    appliance, there must be a full-width,
    closed shelf between them.

    Ventilation
    Ensure that the back of the coffee
    machine is sufficiently ventilated, so
    that steam and warm air can dissipate
    freely.
    Otherwise condensation can build up
    and damage the machine or the
    housing unit.

    Installation
    Before installation make sure that
    there is no power supply to the
    machine. This also applies should it
    ever need to be taken out of its
    housing unit.
    The machine may only be used
    when it has been built in. It can only
    be used in ambient temperatures of
    +15 °C to +38 °C .
    You will need two allen keys (size 3
    and 5) for installing the machine.
    Tip: It is useful to have somewhere at
    the height of the niche to place the
    machine on. This makes electrical
    connection easier.

    ^ Using the large allen key, unscrew all
    four feet underneath the machine out
    by approx. 2 mm.
    The feet can be unscrewed by up to
    approx. 10 mm.
    If the furniture unit walls are 19 mm
    thick you will need to drill four holes in
    the sides for securing the machine.
    To mark the position of these holes:
    ^ Align the machine in the niche. Screw
    the side socket screws inside the
    machine in a little so that they make
    indents in the side walls, and then
    unscrew them again.
    ^ Take the machine out of the niche
    and drill ø 4.5 mm holes,
    approx. 2 mm deep where you made
    the indentations.

    73



  • Page 74

    Installation
    ^ Connect the machine to the electrical
    supply.
    ^ Push it all the way into the niche until
    you feel resistance.

    Ad usting the hinges
    If the machine front becomes difficult to
    open or close after installation you can
    adjust the hinges to realign it:

    Take care not to damage the
    electrical connection, when pushing
    the coffee machine into the the
    niche.
    ^ Open the front of the machine, and
    partially tighten the side socket
    screws.

    ^ Turn screw a to align the front of the
    machine so that it is flush with the
    front of the housing unit.
    ^ Turn screw b to align the front of the
    machine horizontally and vertically.

    ^ Carefully turn the lower socket
    screws a to centre the machine in
    the niche.
    ^ Tighten both upper socket screws b
    by hand to secure the machine in the
    unit. Do not overtighten them.

    74



  • Page 75

    75



  • Page 76

    Alteration rights reserved / 1313
    CVA 6431, CVA 6431 C

    M.-Nr. 09 549 580 / 00






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele CVA 6431 Nespresso wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Miele CVA 6431 Nespresso in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 7,48 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Miele CVA 6431 Nespresso

Miele CVA 6431 Nespresso Kurzanleitung - Deutsch - 2 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Deutsch - 76 seiten

Miele CVA 6431 Nespresso Kurzanleitung - Englisch - 2 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Holländisch - 76 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Französisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info