729402
4
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
4
Hardware Guide
Memory and Storage Devices
Memory
The RB750 has 32MB of built-in memory, RB750GL has 64MB. There are no memory upgrade options.
Input/Output Ports
Ethernet ports
There are five individual Ethernet ports. Ports 2-5 are connected to a switch and can be switched together by
an option in the RouterOS software.
All cables made to EIA/TIA 568A/B cable specifications will work correctly (see Connector Index for pinout).
Note that this port supports automatic cross/straight cable correction (Auto MDI/X), so you can use either
straight or cross-over cable for connecting to other network devices.
LEDs
Ethernet LED lights up when a cable is connected, these LEDs don’t show ethernet activity, just connectivity.
Power LED indicates that the device receives power. ACT LED shows NAND activity and can be programmed to
show other things via RouterOS LED menu.
User's Guide
Powering
The device accepts powering from the power jack or from the first Ethernet port (Passive PoE):
DC power jack (5.5mm outside and 2mm inside diameter, female, pin positive plug) accepts 8-30V DC
The first Ethernet port accepts passive Power over Ethernet accepts 8-30V DC
Under maximum load, the power consumption of this device is 6W
Booting options
RouterOS is the operating system of all RouterBOARD routers. Please see detailed configuration guide here
http://wiki.mikrotik.com/wiki/Category:Manual
Initial configuration includes the following:
Ports Ether2-Ether5 are connected together as a switch. This switch has a DHCP server runni ng, so you
can connect to the devide using the Web based Webfig” interface from Ether2-Ether5 or from the
wireless interface. Open http://192.168.88.1 in your browser, in the page that opens, select Webfig
and log in with username „admin” and no password. The Ether1 port has a firewall on it, and a DHCP
client, so it’s configured to be connected to your ISP.
See this table for specific default config info on all our products:
http://wiki.mikrotik.com/wiki/Manual:Default_Configurations
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mikrotik RB750R2 - hEX lite wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info